30 Commits (211bc824a9380059159c77915a7a939d90e00b73)

Author	SHA1	Message	Date
Freddy	078c40425f	Rename "cluster" config entry to "mesh" (#10127) ... This config entry is being renamed primarily because in k8s the name cluster could be confusing given that the config entry applies across federated datacenters. Additionally, this config entry will only apply to Consul as a service mesh, so the more generic "cluster" name is not needed.	4 years ago
R.B. Boyer	4db8b78854	connect: update centralized upstreams representation in service-defaults (#10015)	4 years ago
freddygv	7cb3f32672	Convert new tproxy structs in api module into ptrs ... This way we avoid serializing these when empty. Otherwise users of the latest version of the api submodule cannot interact with older versions of Consul, because a new api client would send keys that the older Consul doesn't recognize yet.	4 years ago
freddygv	7bd51ff536	Replace TransparentProxy bool with ProxyMode ... This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.	4 years ago
freddygv	d6db67ef86	Fixup test	4 years ago
R.B. Boyer	499fee73b3	connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973) ... This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.	4 years ago
Freddy	8207b832df	Add TransparentProxy option to proxy definitions	4 years ago
freddygv	8b46d8dcbb	Restore old Envoy prefix on escape hatches ... This is done because after removing ID and NodeName from ServiceConfigRequest we will no longer know whether a request coming in is for a Consul client earlier than v1.10.	4 years ago
freddygv	6fd30d0384	Add TransparentProxy opt to proxy definition	4 years ago
freddygv	e3dc2a49df	Turn Limits and PassiveHealthChecks into pointers	4 years ago
freddygv	87cde19b4c	Create new types for service-defaults upstream cfg	4 years ago
R.B. Boyer	1b413b0444	connect: support defining intentions using layer 7 criteria (#8839) ... Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).	4 years ago
R.B. Boyer	d2eb27e0a3	api: support GetMeta() and GetNamespace() on all config entry kinds (#8764) ... Fixes #8755 Since I was updating the interface, i also added the missing `GetNamespace()`. Depending upon how you look at it, this is a breaking change since it adds methods to the exported interface `api.ConfigEntry`. Given that you cannot define your own config entry kinds, and all of the machinery of the `api.Client` acts like a factory to construct the canned ones from the rest of the module, this feels like it's not a problematic change as it would only break someone who had reimplemented the `ConfigEntry` interface themselves for no apparent utility?	4 years ago
freddygv	7b9d1b41d5	Resolve conflicts against master	4 years ago
freddygv	768dbaa68d	Add session flag to cookie config	4 years ago
R.B. Boyer	119e945c3e	connect: all config entries pick up a meta field (#8596) ... Fixes #8595	4 years ago
Daniel Nephin	5afcf5c1bc	Merge pull request #8034 from hashicorp/dnephin/add-linter-staticcheck-4 ... ci: enable SA4006 staticcheck check and add ineffassign	5 years ago
Daniel Nephin	068b43df90	Enable gofmt simplify ... Code changes done automatically with 'gofmt -s -w'	5 years ago
Daniel Nephin	cb050b280c	ci: enable SA4006 staticcheck check ... And fix the 'value not used' issues. Many of these are not bugs, but a few are tests not checking errors, and one appears to be a missed error in non-test code.	5 years ago
Chris Piraino	0c22eacca8	Add TLS field to ingress API structs ... - Adds test in api and command/config/write packages	5 years ago
Freddy	137a2c32c6	TLS Origination for Terminating Gateways (#7671)	5 years ago
Freddy	90576060bc	Add config entry for terminating gateways (#7545) ... This config entry will be used to configure terminating gateways. It accepts the name of the gateway and a list of services the gateway will represent. For each service users will be able to specify: its name, namespace, and additional options for TLS origination. Co-authored-by: Kyle Havlovitz <kylehav@gmail.com> Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
Kyle Havlovitz	c911174327	Add config entry/state for Ingress Gateways (#7483) ... * Add Ingress gateway config entry and other relevant structs * Add api package tests for ingress gateways * Embed EnterpriseMeta into ingress service struct * Add namespace fields to api module and test consul config write decoding * Don't require a port for ingress gateways * Add snakeJSON and camelJSON cases in command test * Run Normalize on service's ent metadata Sadly cannot think of a way to test this in OSS. * Every protocol requires at least 1 service * Validate ingress protocols * Update agent/structs/config_entry_gateways.go Co-authored-by: Chris Piraino <cpiraino@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com>	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
R.B. Boyer	ae79cdab1b	connect: introduce ExternalSNI field on service-defaults (#6324) ... Compiling this will set an optional SNI field on each DiscoveryTarget. When set this value should be used for TLS connections to the instances of the target. If not set the default should be used. Setting ExternalSNI will disable mesh gateway use for that target. It also disables several service-resolver features that do not make sense for an external service.	5 years ago
R.B. Boyer	9753c77a79	api: un-deprecate api.DecodeConfigEntry (#6278) ... Add clarifying commentary about when it is not safe to use it. Also add tests.	5 years ago
R.B. Boyer	2ad516aeaf	do some initial config entry graph validation during writes (#6047)	5 years ago
Paul Banks	0cfb6051ea	Add integration test for central config; fix central config WIP (#5752) ... * Add integration test for central config; fix central config WIP * Add integration test for central config; fix central config WIP * Set proxy protocol correctly and begin adding upstream support * Add upstreams to service config cache key and start new notify watcher if they change. This doesn't update the tests to pass though. * Fix some merging logic get things working manually with a hack (TODO fix properly) * Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway * Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does * Fix up service manageer and API test failures * Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally * Remove version.go hack - will make integration test fail until release * Remove unused code from commands and upstream merge * Re-bump version to 1.5.0	6 years ago
Matt Keeler	3145bf5230	Centralized Config CLI (#5731) ... * Add HTTP endpoints for config entry management * Finish implementing decoding in the HTTP Config entry apply endpoint * Add CAS operation to the config entry apply endpoint Also use this for the bootstrapping and move the config entry decoding function into the structs package. * First pass at the API client for the config entries * Fixup some of the ConfigEntry APIs Return a singular response object instead of a list for the ConfigEntry.Get RPC. This gets plumbed through the HTTP API as well. Dont return QueryMeta in the JSON response for the config entry listing HTTP API. Instead just return a list of config entries. * Minor API client fixes * Attempt at some ConfigEntry api client tests These don’t currently work due to weak typing in JSON * Get some of the api client tests passing * Implement reflectwalk magic to correct JSON encoding a ProxyConfigEntry Also added a test for the HTTP endpoint that exposes the problem. However, since the test doesn’t actually do the JSON encode/decode its still failing. * Move MapWalk magic into a binary marshaller instead of JSON. * Add a MapWalk test * Get rid of unused func * Get rid of unused imports * Fixup some tests now that the decoding from msgpack coerces things into json compat types * Stub out most of the central config cli Fully implement the config read command. * Basic config delete command implementation * Implement config write command * Implement config list subcommand Not entirely sure about the output here. Its basically the read output indented with a line specifying the kind/name of each type which is also duplicated in the indented output. * Update command usage * Update some help usage formatting * Add the connect enable helper cli command * Update list command output * Rename the config entry API client methods. * Use renamed apis * Implement config write tests Stub the others with the noTabs tests. * Change list output format Now just simply output 1 line per named config * Add config read tests * Add invalid args write test. * Add config delete tests * Add config list tests * Add connect enable tests * Update some CLI commands to use CAS ops This also modifies the HTTP API for a write op to return a boolean indicating whether the value was written or not. * Fix up the HTTP API CAS tests as I realized they weren’t testing what they should. * Update config entry rpc tests to properly test CAS * Fix up a few more tests * Fix some tests that using ConfigEntries.Apply * Update config_write_test.go * Get rid of unused import	6 years ago
Kyle Havlovitz	aba54cec55	Add HTTP endpoints for config entry management (#5718)	6 years ago