12 Commits (02869ce9a8c6ee9187a147c98441a5b905095ea0)

Author	SHA1	Message	Date
Dan Stough	b3bd3a6586	[OSS] feat: access logs for listeners and listener filters (#15864) ... * feat: access logs for listeners and listener filters * changelog * fix integration test	2 years ago
Derek Menteer	418bd62c44	Fix mesh gateway configuration with proxy-defaults (#15186) ... * Fix mesh gateway proxy-defaults not affecting upstreams. * Clarify distinction with upstream settings Top-level mesh gateway mode in proxy-defaults and service-defaults gets merged into NodeService.Proxy.MeshGateway, and only gets merged with the mode attached to an an upstream in proxycfg/xds. * Fix mgw mode usage for peered upstreams There were a couple issues with how mgw mode was being handled for peered upstreams. For starters, mesh gateway mode from proxy-defaults and the top-level of service-defaults gets stored in NodeService.Proxy.MeshGateway, but the upstream watch for peered data was only considering the mesh gateway config attached in NodeService.Proxy.Upstreams[i]. This means that applying a mesh gateway mode via global proxy-defaults or service-defaults on the downstream would not have an effect. Separately, transparent proxy watches for peered upstreams didn't consider mesh gateway mode at all. This commit addresses the first issue by ensuring that we overlay the upstream config for peered upstreams as we do for non-peered. The second issue is addressed by re-using setupWatchesForPeeredUpstream when handling transparent proxy updates. Note that for transparent proxies we do not yet support mesh gateway mode per upstream, so the NodeService.Proxy.MeshGateway mode is used. * Fix upstream mesh gateway mode handling in xds This commit ensures that when determining the mesh gateway mode for peered upstreams we consider the NodeService.Proxy.MeshGateway config as a baseline. In absense of this change, setting a mesh gateway mode via proxy-defaults or the top-level of service-defaults will not have an effect for peered upstreams. * Merge service/proxy defaults in cfg resolver Previously the mesh gateway mode for connect proxies would be merged at three points: 1. On servers, in ComputeResolvedServiceConfig. 2. On clients, in MergeServiceConfig. 3. On clients, in proxycfg/xds. The first merge returns a ServiceConfigResponse where there is a top-level MeshGateway config from proxy/service-defaults, along with per-upstream config. The second merge combines per-upstream config specified at the service instance with per-upstream config specified centrally. The third merge combines the NodeService.Proxy.MeshGateway config containing proxy/service-defaults data with the per-upstream mode. This third merge is easy to miss, which led to peered upstreams not considering the mesh gateway mode from proxy-defaults. This commit removes the third merge, and ensures that all mesh gateway config is available at the upstream. This way proxycfg/xds do not need to do additional overlays. * Ensure that proxy-defaults is considered in wc Upstream defaults become a synthetic Upstream definition under a wildcard key "*". Now that proxycfg/xds expect Upstream definitions to have the final MeshGateway values, this commit ensures that values from proxy-defaults/service-defaults are the default for this synthetic upstream. * Add changelog. Co-authored-by: freddygv <freddy@hashicorp.com>	2 years ago
R.B. Boyer	b60d89e7ef	bulk rewrite using this script ... set -euo pipefail unset CDPATH cd "$(dirname "$0")" for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do echo "=== require: $f ===" sed -i '/require := require.New(t)/d' $f # require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f # require.XXX(tblah) but not require.XXX(t, blah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f # require.XXX(rblah) but not require.XXX(r, blah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f gofmt -s -w $f done for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do echo "=== assert: $f ===" sed -i '/assert := assert.New(t)/d' $f # assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f # assert.XXX(tblah) but not assert.XXX(t, blah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f # assert.XXX(rblah) but not assert.XXX(r, blah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f gofmt -s -w $f done	3 years ago
Freddy	3ee66b2e9a	Omit empty tproxy config in JSON responses (#10402)	4 years ago
freddygv	e1808af729	Fixup tests	4 years ago
freddygv	7bd51ff536	Replace TransparentProxy bool with ProxyMode ... This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.	4 years ago
R.B. Boyer	0fb088aac3	agent: make the json/hcl decoding of ConnectProxyConfig fully work with CamelCase and snake_case (#8741) ... Fixes #7418	4 years ago
Kyle Havlovitz	f9672f9bf1	Make sure IngressHosts isn't parsed during JSON decode	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225) ... * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago
Matt Keeler	4728329aeb	Various Gateway Fixes (#6093) ... * Ensure the mesh gateway configuration comes back in the api within each upstream * Add a test for the MeshGatewayConfig in the ToAPI functions * Ensure we don’t use gateways for dc local connections * Update the svc kind index for deletions * Replace the proxycfg.state cache with an interface for testing Also start implementing proxycfg state testing. * Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.	5 years ago
Matt Keeler	8d953f5840	Implement Mesh Gateways ... This includes both ingress and egress functionality.	5 years ago
Paul Banks	b83bbf248c	Add Proxy Upstreams to Service Definition (#4639) ... * Refactor Service Definition ProxyDestination. This includes: - Refactoring all internal structs used - Updated tests for both deprecated and new input for: - Agent Services endpoint response - Agent Service endpoint response - Agent Register endpoint - Unmanaged deprecated field - Unmanaged new fields - Managed deprecated upstreams - Managed new - Catalog Register - Unmanaged deprecated field - Unmanaged new fields - Managed deprecated upstreams - Managed new - Catalog Services endpoint response - Catalog Node endpoint response - Catalog Service endpoint response - Updated API tests for all of the above too (both deprecated and new forms of register) TODO: - config package changes for on-disk service definitions - proxy config endpoint - built-in proxy support for new fields * Agent proxy config endpoint updated with upstreams * Config file changes for upstreams. * Add upstream opaque config and update all tests to ensure it works everywhere. * Built in proxy working with new Upstreams config * Command fixes and deprecations * Fix key translation, upstream type defaults and a spate of other subtele bugs found with ned to end test scripts... TODO: tests still failing on one case that needs a fix. I think it's key translation for upstreams nested in Managed proxy struct. * Fix translated keys in API registration. ≈ * Fixes from docs - omit some empty undocumented fields in API - Bring back ServiceProxyDestination in Catalog responses to not break backwards compat - this was removed assuming it was only used internally. * Documentation updates for Upstreams in service definition * Fixes for tests broken by many refactors. * Enable travis on f-connect branch in this branch too. * Add consistent Deprecation comments to ProxyDestination uses * Update version number on deprecation notices, and correct upstream datacenter field with explanation in docs	6 years ago