TLDR with many modules the versions included in each diverged quite a bit. Attempting to use Go Workspaces produces a bunch of errors.
This commit:
1. Fixes envoy-library-references.sh to work again
2. Ensures we are pulling in go-control-plane@v0.11.0 everywhere (previously it was at that version in some modules and others were much older)
3. Remove one usage of golang/protobuf that caused us to have a direct dependency on it.
4. Remove deprecated usage of the Endpoint field in the grpc resolver.Target struct. The current version of grpc (v1.55.0) has removed that field and recommended replacement with URL.Opaque and calls to the Endpoint() func when needing to consume the previous field.
4. `go work init <all the paths to go.mod files>` && `go work sync`. This syncrhonized versions of dependencies from the main workspace/root module to all submodules
5. Updated .gitignore to ignore the go.work and go.work.sum files. This seems to be standard practice at the moment.
6. Update doc comments in protoc-gen-consul-rate-limit to be go fmt compatible
7. Upgraded makefile infra to perform linting, testing and go mod tidy on all modules in a flexible manner.
8. Updated linter rules to prevent usage of golang/protobuf
9. Updated a leader peering test to account for an extra colon in a grpc error message.
This commit only contains the OSS PR (datacenter query param support).
A separate enterprise PR adds support for ap and namespace query params.
Resources in Consul can exists within scopes such as datacenters, cluster
peers, admin partitions, and namespaces. You can refer to those resources from
interfaces such as the CLI, HTTP API, DNS, and configuration files.
Some scope levels have consistent naming: cluster peers are always referred to
as "peer".
Other scope levels use a short-hand in DNS lookups...
- "ns" for namespace
- "ap" for admin partition
- "dc" for datacenter
...But use long-hand in CLI commands:
- "namespace" for namespace
- "partition" for admin partition
- and "datacenter"
However, HTTP API query parameters do not follow a consistent pattern,
supporting short-hand for some scopes but long-hand for others:
- "ns" for namespace
- "partition" for admin partition
- and "dc" for datacenter.
This inconsistency is confusing, especially for users who have been exposed to
providing scope names through another interface such as CLI or DNS queries.
This commit improves UX by consistently supporting both short-hand and
long-hand forms of the namespace, partition, and datacenter scopes in HTTP API
query parameters.
`property-override` is an extension that allows for arbitrarily
patching Envoy resources based on resource matching filters. Patch
operations resemble a subset of the JSON Patch spec with minor
differences to facilitate patching pre-defined (protobuf) schemas.
See Envoy Extension product documentation for more details.
Co-authored-by: Eric Haberkorn <eric.haberkorn@hashicorp.com>
Co-authored-by: Kyle Havlovitz <kyle@hashicorp.com>
To avoid unintended tampering with remote downstreams via service
config, refactor BasicEnvoyExtender and RuntimeConfig to disallow
typical Envoy extensions from being applied to non-local proxies.
Continue to allow this behavior for AWS Lambda and the read-only
Validate builtin extensions.
Addresses CVE-2023-2816.
* Move status condition for invalid certifcate to reference the listener
that is using the certificate
* Fix where we set the condition status for listeners and certificate
refs, added tests
* Add changelog
* Add MaxEjectionPercent to config entry
* Add BaseEjectionTime to config entry
* Add MaxEjectionPercent and BaseEjectionTime to protobufs
* Add MaxEjectionPercent and BaseEjectionTime to api
* Fix integration test breakage
* Verify MaxEjectionPercent and BaseEjectionTime in integration test upstream confings
* Website docs for MaxEjectionPercent and BaseEjection time
* Add `make docs` to browse docs at http://localhost:3000
* Changelog entry
* so that is the difference between consul-docker and dev-docker
* blah
* update proto funcs
* update proto
---------
Co-authored-by: Maliz <maliheh.monshizadeh@hashicorp.com>
* normalize status conditions for gateways and routes
* Added tests for checking condition status and panic conditions for
validating combinations, added dummy code for fsm store
* get rid of unneeded gateway condition generator struct
* Remove unused file
* run go mod tidy
* Update tests, add conflicted gateway status
* put back removed status for test
* Fix linting violation, remove custom conflicted status
* Update fsm commands oss
* Fix incorrect combination of type/condition/status
* cleaning up from PR review
* Change "invalidCertificate" to be of accepted status
* Move status condition enums into api package
* Update gateways controller and generated code
* Update conditions in fsm oss tests
* run go mod tidy on consul-container module to fix linting
* Fix type for gateway endpoint test
* go mod tidy from changes to api
* go mod tidy on troubleshoot
* Fix route conflicted reason
* fix route conflict reason rename
* Fix text for gateway conflicted status
* Add valid certificate ref condition setting
* Revert change to resolved refs to be handled in future PR
* added method for converting SamenessGroupConfigEntry
- added new method `ToQueryFailoverTargets` for converting a SamenessGroupConfigEntry's members to a list of QueryFailoverTargets
- renamed `ToFailoverTargets` ToServiceResolverFailoverTargets to distinguish it from `ToQueryFailoverTargets`
* Added SamenessGroup to PreparedQuery
- exposed Service.Partition to API when defining a prepared query
- added a method for determining if a QueryFailoverOptions is empty
- This will be useful for validation
- added unit tests
* added method for retrieving a SamenessGroup to state store
* added logic for using PQ with SamenessGroup
- added branching path for SamenessGroup handling in execute. It will be handled separate from the normal PQ case
- added a new interface so that the `GetSamenessGroupFailoverTargets` can be properly tested
- separated the execute logic into a `targetSelector` function so that it can be used for both failover and sameness group PQs
- split OSS only methods into new PQ OSS files
- added validation that `samenessGroup` is an enterprise only feature
* added documentation for PQ SamenessGroup
Before this change, we were not fetching service resolvers (and therefore
service defaults) configuration entries for services on members of sameness
groups.
This implements permissive mTLS , which allows toggling services into "permissive" mTLS mode.
Permissive mTLS mode allows incoming "non Consul-mTLS" traffic to be forward unmodified to the application.
* Update service-defaults and proxy-defaults config entries with a MutualTLSMode field
* Update the mesh config entry with an AllowEnablingPermissiveMutualTLS field and implement the necessary validation. AllowEnablingPermissiveMutualTLS must be true to allow changing to MutualTLSMode=permissive, but this does not require that all proxy-defaults and service-defaults are currently in strict mode.
* Update xDS listener config to add a "permissive filter chain" when MutualTLSMode=permissive for a particular service. The permissive filter chain matches incoming traffic by the destination port. If the destination port matches the service port from the catalog, then no mTLS is required and the traffic sent is forwarded unmodified to the application.
This commit adds the PrioritizeByLocality field to both proxy-config
and service-resolver config entries for locality-aware routing. The
field is currently intended for enterprise only, and will be used to
enable prioritization of service-mesh connections to services based
on geographical region / zone.
* copyright headers for agent folder
* Ignore test data files
* fix proto files and remove headers in agent/uiserver folder
* ignore deep-copy files
* copyright headers for agent folder
* fix merge conflicts
* copyright headers for agent folder
* Ignore test data files
* fix proto files
* ignore agent/uiserver folder for now
* copyright headers for agent folder
* Add copyright headers for acl, api and bench folders
This commit adds a sameness-group config entry to the API and structs packages. It includes some validation logic and a new memdb index that tracks the default sameness-group for each partition. Sameness groups will simplify the effort of managing failovers / intentions / exports for peers and partitions.
Note that this change purely to introduce the configuration entry and does not include the full functionality of sameness-groups.
Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory
where a unix socket will be created with the name
`<namespace>_<proxy_id>.sock` to forward Envoy metrics.
If set, this will configure:
- In bootstrap configuration a local stats_sink and static cluster.
These will forward metrics to a loopback listener sent over xDS.
- A dynamic listener listening at the socket path that the previously
defined static cluster is sending metrics to.
- A dynamic cluster that will forward traffic received at this listener
to the hcp-metrics-collector service.
Reasons for having a static cluster pointing at a dynamic listener:
- We want to secure the metrics stream using TLS, but the stats sink can
only be defined in bootstrap config. With dynamic listeners/clusters
we can use the proxy's leaf certificate issued by the Connect CA,
which isn't available at bootstrap time.
- We want to intelligently route to the HCP collector. Configuring its
addreess at bootstrap time limits our flexibility routing-wise. More
on this below.
Reasons for defining the collector as an upstream in `proxycfg`:
- The HCP collector will be deployed as a mesh service.
- Certificate management is taken care of, as mentioned above.
- Service discovery and routing logic is automatically taken care of,
meaning that no code changes are required in the xds package.
- Custom routing rules can be added for the collector using discovery
chain config entries. Initially the collector is expected to be
deployed to each admin partition, but in the future could be deployed
centrally in the default partition. These config entries could even be
managed by HCP itself.
* Leverage ServiceResolver ConnectTimeout for route timeouts to make TerminatingGateway upstream timeouts configurable
* Regenerate golden files
* Add RequestTimeout field
* Add changelog entry
* Fix infinite recursion on InlineCertificateConfigEntry
GetNamespace() + GetMeta() were calling themselves. This change also simplifies by removing nil-checking to match pre-existing config entries
Co-Authored-By: Andrew Stucki <3577250+andrewstucki@users.noreply.github.com>
* Add tests for inline-certificate
* Add alias for private key field on inline-certificate
* Use valid certificate + private key for inline-certificate tests
---------
Co-authored-by: Andrew Stucki <3577250+andrewstucki@users.noreply.github.com>
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* [API Gateway] Add integration test for HTTP routes
* Add some fixes to allow for registering via consul connect envoy -gateway api
* Fix infinite recursion
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Matt Keeler