consul

Branch: zs.test-mdx-fixes

Author	SHA1	Message	Date
R.B. Boyer	fc9b1a277d	sync changes to oss files made in enterprise (#10670 )	3 years ago
Evan Culver	0527dcff57	acls: Show `AuthMethodNamespace` when reading/listing ACL token meta (#10598 )	3 years ago
Kyle Havlovitz	77a2f38677	http: add partition query param parsing	3 years ago
Evan Culver	8fce7083c1	tests: skip cases that depend on test server when -short flag set (#10576 )	3 years ago
Evan Culver	13bd86527b	Add support for returning ACL secret IDs for accessors with acl:write (#10546 )	3 years ago
Jared Kirschner	14059c2653	Fix defaults for autopilot config update Previously, for a POST request to the /v1/operator/autopilot/configuration endpoint, any fields not included in the payload were set to a zero-initialized value rather than the documented default value. Now, if an optional field is not included in the payload, it will be set to its documented default value: - CleanupDeadServers: true - LastContactThreshold: "200ms" - MaxTrailingLogs: 250 - MinQuorum: 0 - ServerStabilizationTime: "10s" - RedundancyZoneTag: "" - DisableUpgradeMigration: false - UpgradeVersionTag: ""	3 years ago
Daniel Nephin	3a045cca8d	ca: remove unused RotationPeriod field This field was never used. Since it is persisted as part of a map[string]interface{} it is pretty easy to remove it.	3 years ago
Kyle Nusbaum	e72a703041	api: change io.Discard to ioutil.Discard	3 years ago
Daniel Nephin	6ac9149c3f	api: properly close the response body reads resp.Body until EOF, so that the http client is able to re-use the TCP connection.	3 years ago
Freddy	ffb13f35f1	Rename CatalogDestinationsOnly (#10397 ) CatalogDestinationsOnly is a passthrough that would enable dialing addresses outside of Consul's catalog. However, when this flag is set to true only _connect_ endpoints for services can be dialed. This flag is being renamed to signal that non-Connect endpoints can't be dialed by transparent proxies when the value is set to true.	3 years ago
Freddy	429f9d8bb8	Add flag for transparent proxies to dial individual instances (#10329 )	4 years ago
Dhia Ayachi	4c7f5f31c7	debug: remove the CLI check for debug_enabled (#10273 ) * debug: remove the CLI check for debug_enabled The API allows collecting profiles even debug_enabled=false as long as ACLs are enabled. Remove this check from the CLI so that users do not need to set debug_enabled=true for no reason. Also: - fix the API client to return errors on non-200 status codes for debug endpoints - improve the failure messages when pprof data can not be collected Co-Authored-By: Dhia Ayachi <dhia@hashicorp.com> * remove parallel test runs parallel runs create a race condition that fail the debug tests * Add changelog Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>	4 years ago
Rémi Lapeyre	213524a657	Always set the Content-Type header when a body is present (#10204 ) * Always set the Content-Type header when a body is present Closes https://github.com/hashicorp/consul/issues/10011 * Add Changelog entry * Add more Content-Type exceptions * Fix tests	4 years ago
Matt Keeler	08eb600ee5	Deprecate API driven licensing. The two methods in the API client to Put or Reset a license will now always return an error.	4 years ago
Iryna Shustava	d7d44f6ae7	Save exposed ports in agent's store and expose them via API (#10173 ) * Save exposed HTTP or GRPC ports to the agent's store * Add those the health checks API so we can retrieve them from the API * Change redirect-traffic command to also exclude those ports from inbound traffic redirection when expose.checks is set to true.	4 years ago
Daniel Nephin	0f53d6e119	api: fix mesh config entry tests for default namespace	4 years ago
Mark Anderson	f808a25a73	Fixup checksums for tests Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
Mark Anderson	4d0346bc46	Fixup filtering tests Missed annotations for SocketPath, LocalSocketPath, LocalServiceSocketPath Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
Daniel Nephin	c8c85523e1	config-entries: add a test for the API client Also fixes a bug with listing kind=mesh config entries. ValidateConfigEntryKind was only being used by the List endpoint, and was yet another place where we have to enumerate all the kinds. This commit removes ValidateConfigEntryKind and uses MakeConfigEntry instead. This change removes the need to maintain two separate functions at the cost of creating an instance of the config entry which will be thrown away immediately.	4 years ago
Mark Anderson	8040f91a43	Add support for downstreams Enhance config by adding SocketPath and LocalSocketPath config values Supports syntax of the form: ``` services { name = "sock_forwarder" id = "sock_forwarder.1" socket_path = "/tmp/downstream_3.sock" connect { sidecar_service { proxy { local_service_socket_path = "/tmp/downstream.sock" } } } } ``` Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
Mark Anderson	583ae65d5b	Convert mode to string representation Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
Mark Anderson	8b1217417a	First changes for unix domain sockets upstreams Start making structure changes to support unix domain socket address for upstreams upstreams = [ { destination_name = "echo-service" local_bind_socket_path = "/tmp/upstream.sock" config { passive_health_check { interval = "10s" max_failures = 42 } } } Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
Daniel Nephin	a07a58a873	config-entry: use custom MarshalJSON for mesh type So that the Kind field is added to the JSON object.	4 years ago
Daniel Nephin	62efaaab21	config-entry: remove Kind and Name field from Mesh config entry No config entry needs a Kind field. It is only used to determine the Go type to target. As we introduce new config entries (like this one) we can remove the kind field and have the GetKind method return the single supported value. In this case (similar to proxy-defaults) the Name field is also unnecessary. We always use the same value. So we can omit the name field entirely.	4 years ago
Freddy	078c40425f	Rename "cluster" config entry to "mesh" (#10127 ) This config entry is being renamed primarily because in k8s the name cluster could be confusing given that the config entry applies across federated datacenters. Additionally, this config entry will only apply to Consul as a service mesh, so the more generic "cluster" name is not needed.	4 years ago
R.B. Boyer	4db8b78854	connect: update centralized upstreams representation in service-defaults (#10015 )	4 years ago
freddygv	7cb3f32672	Convert new tproxy structs in api module into ptrs This way we avoid serializing these when empty. Otherwise users of the latest version of the api submodule cannot interact with older versions of Consul, because a new api client would send keys that the older Consul doesn't recognize yet.	4 years ago
freddygv	7bd51ff536	Replace TransparentProxy bool with ProxyMode This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.	4 years ago
freddygv	98ba582797	Fixup mesh gateway docs	4 years ago
freddygv	d6db67ef86	Fixup test	4 years ago
freddygv	ab752c1c86	Avoid sending zero-value upstream defaults from api	4 years ago
R.B. Boyer	499fee73b3	connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973 ) This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.	4 years ago
Daniel Nephin	46279547ec	Update memberlist to v0.2.3 To pickup data race fixes	4 years ago
Seth Hoenig	cd1cd4febd	api: enable query options on agent endpoints This PR adds support for setting QueryOptions on a few agent API endpoints. Nomad needs to be able to set the Namespace field on these endpoints to: - query for services / checks in a namespace - deregister services / checks in a namespace - update TTL status on checks in a namespace	4 years ago
Christopher Broglie	f0307c73e5	Add support for configuring TLS ServerName for health checks Some TLS servers require SNI, but the Golang HTTP client doesn't include it in the ClientHello when connecting to an IP address. This change adds a new TLSServerName field to health check definitions to optionally set it. This fixes #9473.	4 years ago
freddygv	6090cfcf68	PR comments	4 years ago
freddygv	8b46d8dcbb	Restore old Envoy prefix on escape hatches This is done because after removing ID and NodeName from ServiceConfigRequest we will no longer know whether a request coming in is for a Consul client earlier than v1.10.	4 years ago
freddygv	41b2ba1e58	Add omitempty across the board for UpstreamConfig	4 years ago
Matt Keeler	30903db442	AutopilotServerHealth now handles the 429 status code (#8599 ) AutopilotServerHealthy now handles the 429 status code Previously we would error out and not parse the response. Now either a 200 or 429 status code are considered expected statuses and will result in the method returning the reply allowing API consumers to not only see if the system is healthy or not but which server is unhealthy.	4 years ago
freddygv	23ffa3d3f3	And another test fix	4 years ago
freddygv	6fd30d0384	Add TransparentProxy opt to proxy definition	4 years ago
freddygv	e3dc2a49df	Turn Limits and PassiveHealthChecks into pointers	4 years ago
freddygv	87cde19b4c	Create new types for service-defaults upstream cfg	4 years ago
Mark Anderson	b9d22f48cd	Add fields to the /acl/auth-methods endpoint. (#9741 ) * A GET of the /acl/auth-method/:name endpoint returns the fields MaxTokenTTL and TokenLocality, while a LIST (/acl/auth-methods) does not. The list command returns a filtered subset of the full set. This is somewhat deliberate, so that secrets aren't shown, but the TTL and Locality fields aren't (IMO) security critical, and it is useful for the front end to be able to show them. For consistency these changes mirror the 'omit empty' and string representation choices made for the GET call. This includes changes to the gRPC and API code in the client. The new output looks similar to this curl 'http://localhost:8500/v1/acl/auth-methods' \| jq '.' { "MaxTokenTTL": "8m20s", "Name": "minikube-ttl-local2", "Type": "kubernetes", "Description": "minikube auth method", "TokenLocality": "local", "CreateIndex": 530, "ModifyIndex": 530, "Namespace": "default" } ] Signed-off-by: Mark Anderson <manderson@hashicorp.com> * Add changelog Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
Kyle Havlovitz	7dac583863	connect/ca: Allow ForceWithoutCrossSigning for all providers This allows setting ForceWithoutCrossSigning when reconfiguring the CA for any provider, in order to forcibly move to a new root in cases where the old provider isn't reachable or able to cross-sign for whatever reason.	4 years ago
Conor Mongey	7a368bd2b6	Move header methods from config to client	4 years ago
Conor Mongey	eb65e59741	Only override headers if they're set	4 years ago
Conor Mongey	f647569b84	Prefer http.Header over map[string]string to allow for multi-valued headers	4 years ago
Conor Mongey	cdc8cd7b0e	Allow setting arbitrary headers in API client	4 years ago
Mike Morris	ab927d5480	Merge pull request #9270 from hashicorp/release/1.9.0 merge: release/1.9.0 back into 1.9.x	4 years ago

... 5 6 7 8 9 ...

937 Commits (zs.test-mdx-fixes)