consul

Commit Graph

Author	SHA1	Message	Date
Daniel Nephin	2fc988d51d	cmd: introduce a shim to expose Stdout/Stderr writers This will allow commands to do the right thing, and write to the proper output stream.	4 years ago
Daniel Nephin	e573641995	cmd: remove unnecessary args to agent.New The version args are static and passed in from the caller. Instead read the static values in New. The shutdownCh was never closed, so did nothing. Remove it as a field and an arg.	4 years ago
Dhia Ayachi	15dddc9edb	make tests use a dummy node_name to avoid environment related failures (#10262 ) * fix tests to use a dummy nodeName and not fail when hostname is not a valid nodeName * remove conditional testing * add test when node name is invalid	4 years ago
Daniel Nephin	2054402a53	envoy: improve comments	4 years ago
Daniel Nephin	c9bc5f92b7	envoy: fix bootstrap deadlock caused by a full named pipe Normally the named pipe would buffer up to 64k, but in some cases when a soft limit is reached, they will start only buffering up to 4k. In either case, we should not deadlock. This commit changes the pipe-bootstrap command to first buffer all of stdin into the process, before trying to write it to the named pipe. This allows the process memory to act as the buffer, instead of the named pipe. Also changed the order of operations in `makeBootstrapPipe`. The new test added in this PR showed that simply buffering in the process memory was not enough to fix the issue. We also need to ensure that the `pipe-bootstrap` process is started before we try to write to its stdin. Otherwise the write will still block. Also set stdout/stderr on the subprocess, so that any errors are visible to the user.	4 years ago
Daniel Nephin	e1b1ab7ef6	envoy: start timeout func after validation This removes the need to check arg length in the timeout function.	4 years ago
Dhia Ayachi	4c7f5f31c7	debug: remove the CLI check for debug_enabled (#10273 ) * debug: remove the CLI check for debug_enabled The API allows collecting profiles even debug_enabled=false as long as ACLs are enabled. Remove this check from the CLI so that users do not need to set debug_enabled=true for no reason. Also: - fix the API client to return errors on non-200 status codes for debug endpoints - improve the failure messages when pprof data can not be collected Co-Authored-By: Dhia Ayachi <dhia@hashicorp.com> * remove parallel test runs parallel runs create a race condition that fail the debug tests * Add changelog Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>	4 years ago
Daniel Nephin	5a7059f45c	redirecttraffic: fix a flaky test https://app.circleci.com/pipelines/github/hashicorp/consul-enterprise/6408/workflows/e90b1140-daa2-458f-8197-d1821e3693e3/jobs/94694/tests#failed-test-0 The ExcludeInboundPorts can be in a different order sometimes, although I'm not sure how. Also removes t.Parallel. We should only need to use t.Parallel in large packages with many slow tests. In this case there is only a single slow test so we don't get any benefit. Also add struct field names to the testcases list, so that it is easier to see what each value is doing, and to make it easier to add new fields in the future.	4 years ago
Iryna Shustava	d7d44f6ae7	Save exposed ports in agent's store and expose them via API (#10173 ) * Save exposed HTTP or GRPC ports to the agent's store * Add those the health checks API so we can retrieve them from the API * Change redirect-traffic command to also exclude those ports from inbound traffic redirection when expose.checks is set to true.	4 years ago
R.B. Boyer	3b50a55533	connect: update supported envoy versions to 1.18.3, 1.17.3, 1.16.4, and 1.15.5 (#10231 )	4 years ago
Mark Anderson	06f0f79218	Continue working through proxy and agent Rework/listeners, rename makeListener Refactor, tests pass Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
Luke Kysow	8d6cbe7281	Give descriptive error if auth method not found (#10163 ) * Give descriptive error if auth method not found Previously during a `consul login -method=blah`, if the auth method was not found, the error returned would be "ACL not found". This is potentially confusing because there may be many different ACLs involved in a login: the ACL of the Consul client, perhaps the binding rule or the auth method. Now the error will be "auth method blah not found", which is much easier to debug.	4 years ago
Daniel Nephin	a07a58a873	config-entry: use custom MarshalJSON for mesh type So that the Kind field is added to the JSON object.	4 years ago
Daniel Nephin	62efaaab21	config-entry: remove Kind and Name field from Mesh config entry No config entry needs a Kind field. It is only used to determine the Go type to target. As we introduce new config entries (like this one) we can remove the kind field and have the GetKind method return the single supported value. In this case (similar to proxy-defaults) the Name field is also unnecessary. We always use the same value. So we can omit the name field entirely.	4 years ago
R.B. Boyer	abc1dc0fe9	connect: update supported envoy versions to 1.18.2, 1.17.2, 1.16.3, and 1.15.4 (#10101 ) The only thing that needed fixing up pertained to this section of the 1.18.x release notes: > grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default. For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default. Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.	4 years ago
R.B. Boyer	71d45a3460	Support Incremental xDS mode (#9855 ) This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time	4 years ago
Iryna Shustava	8dffb89131	Implement traffic redirection exclusion based on proxy config and user-provided values (#10134 ) * Use proxy outbound port from TransparentProxyConfig if provided * If -proxy-id is provided to the redirect-traffic command, exclude any listener ports from inbound traffic redirection. This includes envoy_prometheus_bind_addr, envoy_stats_bind_addr, and the ListenerPort from the Expose configuration. * Allow users to provide additional inbound and outbound ports, outbound CIDRs and additional user IDs to be excluded from traffic redirection. This affects both the traffic-redirect command and the iptables SDK package.	4 years ago
Freddy	078c40425f	Rename "cluster" config entry to "mesh" (#10127 ) This config entry is being renamed primarily because in k8s the name cluster could be confusing given that the config entry applies across federated datacenters. Additionally, this config entry will only apply to Consul as a service mesh, so the more generic "cluster" name is not needed.	4 years ago
Paul Banks	c501468d78	Fix panic bug in snapshot inspect (#10091 ) * Fix panic bug in snapshot inspect * Add changelog entry * Update .changelog/10091.txt * Undo bad GitHub UI merge * Undo bad GitHub UI merge	4 years ago
Paul Banks	d717d2cdc4	CLI: Allow snapshot inspect to work on internal raft snapshots directly. (#10089 ) * CLI: Add support for reading internal raft snapshots to snapshot inspect * Add snapshot inspect test for raw state files * Add changelog entry * Update .changelog/10089.txt	4 years ago
R.B. Boyer	4db8b78854	connect: update centralized upstreams representation in service-defaults (#10015 )	4 years ago
freddygv	e1808af729	Fixup tests	4 years ago
freddygv	7cb3f32672	Convert new tproxy structs in api module into ptrs This way we avoid serializing these when empty. Otherwise users of the latest version of the api submodule cannot interact with older versions of Consul, because a new api client would send keys that the older Consul doesn't recognize yet.	4 years ago
freddygv	7bd51ff536	Replace TransparentProxy bool with ProxyMode This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.	4 years ago
Iryna Shustava	5755c97bc7	cli: Add new `consul connect redirect-traffic` command for applying traffic redirection rules when Transparent Proxy is enabled. (#9910 ) * Add new consul connect redirect-traffic command for applying traffic redirection rules when Transparent Proxy is enabled. * Add new iptables package for applying traffic redirection rules with iptables.	4 years ago
freddygv	ab752c1c86	Avoid sending zero-value upstream defaults from api	4 years ago
R.B. Boyer	5bcfe930c6	command: when generating envoy bootstrap configs to stdout do not mix informational logs into the json (#9980 ) Fixes #9921	4 years ago
R.B. Boyer	499fee73b3	connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973 ) This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.	4 years ago
Hans Hasselberg	53e9c134af	introduce certopts (#9606 ) * introduce cert opts * it should be using the same signer * lint and omit serial	4 years ago
woz5999	39f448589d	support env var expansion in envoy statsd urls Fixes #8561	4 years ago
freddygv	8b46d8dcbb	Restore old Envoy prefix on escape hatches This is done because after removing ID and NodeName from ServiceConfigRequest we will no longer know whether a request coming in is for a Consul client earlier than v1.10.	4 years ago
freddygv	6fd30d0384	Add TransparentProxy opt to proxy definition	4 years ago
freddygv	e3dc2a49df	Turn Limits and PassiveHealthChecks into pointers	4 years ago
freddygv	87cde19b4c	Create new types for service-defaults upstream cfg	4 years ago
Nitya Dhanushkodi	15e8b13891	Add flags to consul connect envoy for metrics merging. (#9768 ) Allows setting -prometheus-backend-port to configure the cluster envoy_prometheus_bind_addr points to. Allows setting -prometheus-scrape-path to configure which path envoy_prometheus_bind_addr exposes metrics on. -prometheus-backend-port is used by the consul-k8s metrics merging feature, to configure envoy_prometheus_bind_addr to point to the merged metrics endpoint that combines Envoy and service metrics so that one set of annotations on a Pod can scrape metrics from the service and it's Envoy sidecar. -prometheus-scrape-path is used to allow configurability of the path where prometheus metrics are exposed on envoy_prometheus_bind_addr.	4 years ago
R.B. Boyer	398b766532	xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658 ) - Also add support for envoy 1.17.0	4 years ago
R.B. Boyer	3b6ffc447b	xds: remove deprecated usages of xDS (#9602 ) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425	4 years ago
Alex Dzyoba	098fd1797b	command/kv: Add prefix option to kv import command Currently when data is imported via `consul kv import` it overwrites keys under the root key. Since `consul kv export` can retrieve data for the given prefix, i.e. part of the KV tree, importing it under root may be not what users want. To mirror prefix behavior from export this PR adds prefix feature to the import command that adds prefix to all keys that are imported.	4 years ago
R.B. Boyer	6eeccc93ce	connect: update supported envoy point releases to 1.16.2, 1.15.3, 1.14.6, 1.13.7 (#9737 )	4 years ago
Kyle Havlovitz	7dac583863	connect/ca: Allow ForceWithoutCrossSigning for all providers This allows setting ForceWithoutCrossSigning when reconfiguring the CA for any provider, in order to forcibly move to a new root in cases where the old provider isn't reachable or able to cross-sign for whatever reason.	4 years ago
Daniel Nephin	1dcafa51a4	config: make config.TestLoad_FullConfig use config.Load This commit makes a number of changes that should make TestLoad_FullConfig easier to work with, and make the test more like real world scenarios. * use separate files in testdata/ dir to store the config source. Separate files are much easier to edit because editors can syntax highlight json/hcl, and it makes strings easier to find. Previously trying to find strings would match strings used in other tests. * use the exported config.Load interface instead of internal NewBuilder and BuildAndValidate. * remove the tail config overrides, which are only necessary with nonZero works.	4 years ago
Daniel Nephin	32d36d0dd4	config: replace calls to config.NewBuilder with config.Load This is another incremental change to reduce config loading to a single small interface. All calls to NewBuilder can be replaced with Load.	4 years ago
Daniel Nephin	97a577502d	config: improve the interface of Load This commit reduces the interface to Load() a bit, in preparation for unexporting NewBuilder and having everything call Load. The three arguments are reduced to a single argument by moving the other two into the options struct. The three return values are reduced to two by moving the RuntimeConfig and Warnings into a LoadResult struct.	4 years ago
Hans Hasselberg	444cdeb8fb	Add flags to support CA generation for Connect (#9585 )	4 years ago
Daniel Nephin	3d39359bcb	agent: move deprecated AddServiceFromSource to a test file The method is only used in tests, and only exists for legacy calls. There was one other package which used this method in tests. Export the AddServiceRequest and a couple of its fields so the new function can be used in those tests.	4 years ago
Daniel Nephin	6757231b82	agent: rename AddService->AddServiceFromSource In preparation for extracting a single AddService func that accepts a request struct.	4 years ago
R.B. Boyer	b5f9a293c9	chore: regenerate envoy golden files (#9634 )	4 years ago
Matt Keeler	9215fc4e9d	Fix flaky CLI Intention Listing Test	4 years ago
Michael Hofer	3c3b67288d	cli: Add consul intention list command (based on PR #6825 ) (#9468 ) This PR is based on the previous work by @snuggie12 in PR #6825. It adds the command consul intention list to list all available intentions. The list functionality for intentions seems a bit overdue as it's just very handy. The web UI cannot list intentions outside of the default namespace, and using the API is sometimes not the friendliest option. ;) I cherry picked snuggie12's commits who did most of the heavy lifting (thanks again @snuggie12 for your great work!). The changes in the original commit mostly still worked on the current HEAD. On top of that I added support for namespaces and fixed the docs as they are managed differently today. Also the requested changes related to the "Connect" references in the original PRs have been addressed. Fixes #5652 Co-authored-by: Matt Hoey <mhoey05@jcu.edu>	4 years ago
Daniel Nephin	b9e60c0775	testing: skip slow tests with -short Add a skip condition to all tests slower than 100ms. This change was made using `gotestsum tool slowest` with data from the last 3 CI runs of master. See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests With this change: ``` $ time go test -count=1 -short ./agent ok github.com/hashicorp/consul/agent 0.743s real 0m4.791s $ time go test -count=1 -short ./agent/consul ok github.com/hashicorp/consul/agent/consul 4.229s real 0m8.769s ```	4 years ago

... 3 4 5 6 7 ...

2317 Commits (NET-3914-gha-resolve-the-issue-of-running-multiple-docker-container)