consul

Branch: HCPCP-1619-unix-socket-host

Author	SHA1	Message	Date
Daniel Nephin	fe2f80c3a1	Use SIGABRT to get a stack trace when the timeout is hit	4 years ago
Daniel Nephin	8e67d8eaeb	sdk: mitigate api test timeout Occasionally we are seeing the go-test-api job timeout at 10 minutes. Looking at the stack trace I saw the following: 1. Lots of tests blocked on server.Stop in NewTestServerConfigT. This suggests that SIGINT is being sent to the server, but the server is not properly shutting down. 2. Over 20k goroutines that look like this: goroutine 16355 [select, 8 minutes]: net/http.(persistConn).readLoop(0xc004270240) /usr/local/go/src/net/http/transport.go:2099 +0x99e created by net/http.(Transport).dialConn /usr/local/go/src/net/http/transport.go:1647 +0xc56 Issue 1 seems to be the main problem, but debugging that directly is not possible because our buffered logs do not get sent when the tests timeout. To mitigate this problem I've added a timeout to the cmd.Wait() to force kill the process and return an error. Unfortunately because we retry this operation, we still may not see the cause because the next attempt will likely pass. I'm tempted to remove the retry around NewTestServerConfigT. Issue 2 seems to be caused by not closing the response body. Since the request is performed many times in a loop, many goroutines are created and are not closed until the response body is closed.	4 years ago
Daniel Nephin	51efba2c7d	testutil: NewLogBuffer - buffer logs until a test fails Replaces #7559 Running tests in parallel, with background goroutines, results in test output not being associated with the correct test. `go test` does not make any guarantees about output from goroutines being attributed to the correct test case. Attaching log output from background goroutines also cause data races. If the goroutine outlives the test, it will race with the test being marked done. Previously this was noticed as a panic when logging, but with the race detector enabled it is shown as a data race. The previous solution did not address the problem of correct test attribution because test output could still be hidden when it was associated with a test that did not fail. You would have to look at all of the log output to find the relevant lines. It also made debugging test failures more difficult because each log line was very long. This commit attempts a new approach. Instead of printing all the logs, only print when a test fails. This should work well when there are a small number of failures, but may not work well when there are many test failures at the same time. In those cases the failures are unlikely a result of a specific test, and the log output is likely less useful. All of the logs are printed from the test goroutine, so they should be associated with the correct test. Also removes some test helpers that were not used, or only had a single caller. Packages which expose many functions with similar names can be difficult to use correctly. Related: https://github.com/golang/go/issues/38458 (may be fixed in go1.15) https://github.com/golang/go/issues/38382#issuecomment-612940030	4 years ago
Iryna Shustava	03366573d7	sdk: Use /v1/status/leader endpoint when starting a test server (#8192 ) Switch from /v1/agent/self to /v1/status/leader when checking if the test server has come up successfully in the waitForAPI function. Previously, the test server was relying (probably not intentionally) on the default value of the acl_enforce_version_8 in the TestConfig, which was false. So if you create a test server and enabled ACLs, they would not be enforced and the server would be able to come up pretty quickly because /v1/agent/self would return a 200 status pretty much as soon as the agent is running and most likely before leader election is finished. Now that we have removed acl_enforce_version_8 property (equivalent to being true by default) if you've created a test server with ACLs enabled, it will need to wait for leader election and for ACLs to be initialized before it'll get a successful response from the /v1/agent/self. Note: With this change, waitForAPI function no longer requires a 200 response status from the v1/status/leader endpoint. This is because in some tests, namely TestAPI_AgentLeave, we are only running clients, and this endpoint returns a 500 status.	4 years ago
R.B. Boyer	ffb9c7d6f7	acl: remove the deprecated `acl_enforce_version_8` option (#7991 ) Fixes #7292	5 years ago
R.B. Boyer	b282268408	sdk: extracting testutil.RequireErrorContains from various places it was duplicated (#7753 )	5 years ago
Matt Keeler	dfb0177dbc	Testing updates to support namespaced testing of the agent/xds… (#7185 ) * Various testing updates to support namespaced testing of the agent/xds package * agent/proxycfg package updates to support better namespace testing	5 years ago
Chris Piraino	401221de58	Allow users to configure either unstructured or JSON logging (#7130 ) * hclog Allow users to choose between unstructured and JSON logging	5 years ago
Matt Keeler	b57c2b78fd	Unflake the TestAPI_AgentConnectCALeaf test (#7142 ) * Unflake the TestAPI_AgentConnectCALeaf test * Modify the WaitForActiveCARoot to actually verify that at least one root exists Also verify that the active root id field is set	5 years ago
Chris Piraino	336f62fa99	Fix up formatting in sdk package (#7109 )	5 years ago
Song Yihan	04305be555	tests: fix zombie consul process while invoking TestServer.Stop() method in sdk/testutil in Windows (#6032 ) * Fix zombie consul process in Windows Windows doesn't support Interrupt signal, thus while stop it on Windows platform it would fail and left zombie consul process	5 years ago
Paul Banks	1807af552e	Fix TestAPI_DiscoveryChain_Get flake (#7082 )	5 years ago
Mike Morris	1112c696cf	sdk: add NewTestServerT, deprecate NewTestServer (#6761 ) * prevent nil pointer deref from t.Logf usage * enforce non-nil *testing.T in NewTestServerT	5 years ago
R.B. Boyer	274b5a46b3	sdk: ignore panics due to stray goroutines logging after a test completes (#6632 ) If there is imperfect goroutine lifespan tracking if we pipe our logs through testing.T.Logf there is a chance of a stray goroutine attempting to log after the test that spawned it completes. This results in a panic of: panic: Log in goroutine after TestLeader_SecondaryCA_Initialize has completed... This isn't great and should be fixed, but quickly runs into situations around externally cancelling blocking queries which isn't terribly possible at the moment. The concession here is to ignore these specific panics for now. This can be triggered easily when running some tests with a high `-count=YYY` value.	5 years ago
Matt Keeler	b9fe39d5aa	Nil checks in the testWriter to prevent using a bad testing.TB (#6517 ) Also needed to update some funcs that were taking a *testing.T to use a testing.TB. This prevents passing a nil pointer as a non-nil interface value and thus making it impossible to detect nil before using the interfaces functions.	5 years ago
Matt Keeler	6d4930da93	Dont crash in the testutil server creation (#6516 )	5 years ago
R.B. Boyer	f74244dde8	api/watch: reduce timing dependence on tests of watch behavior Also for debugging purposes send the stdout/stderr streams from consul processes spawned for API tests to testing.T.Logf	5 years ago
R.B. Boyer	f9496dc627	sdk: add freelist tracking and ephemeral port range skipping to freeport This should cut down on test flakiness. Problems handled: - If you had enough parallel test cases running, the former circular approach to handling the port block could hand out the same port to multiple cases before they each had a chance to bind them, leading to one of the two tests to fail. - The freeport library would allocate out of the ephemeral port range. This has been corrected for Linux (which should cover CI). - The library now waits until a formerly-in-use port is verified to be free before putting it back into circulation.	5 years ago
Mike Morris	65be58703c	connect: remove managed proxies (#6220 ) * connect: remove managed proxies implementation and all supporting config options and structs * connect: remove deprecated ProxyDestination * command: remove CONNECT_PROXY_TOKEN env var * agent: remove entire proxyprocess proxy manager * test: remove all managed proxy tests * test: remove irrelevant managed proxy note from TestService_ServerTLSConfig * test: update ContentHash to reflect managed proxy removal * test: remove deprecated ProxyDestination test * telemetry: remove managed proxy note * http: remove /v1/agent/connect/proxy endpoint * ci: remove deprecated test exclusion * website: update managed proxies deprecation page to note removal * website: remove managed proxy configuration API docs * website: remove managed proxy note from built-in proxy config * website: add note on removing proxy subdirectory of data_dir	5 years ago
Christian Muehlhaeuser	7753b97cc7	Simplified code in various places (#6176 ) All these changes should have no side-effects or change behavior: - Use bytes.Buffer's String() instead of a conversion - Use time.Since and time.Until where fitting - Drop unnecessary returns and assignment	5 years ago
Matt Keeler	4728329aeb	Various Gateway Fixes (#6093 ) * Ensure the mesh gateway configuration comes back in the api within each upstream * Add a test for the MeshGatewayConfig in the ToAPI functions * Ensure we don’t use gateways for dc local connections * Update the svc kind index for deletions * Replace the proxycfg.state cache with an interface for testing Also start implementing proxycfg state testing. * Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.	5 years ago
Freddy	0b9111714b	Update TestServer creation in sdk/testutil (#6084 ) * Retry the creation of the test server three times. * Reduce the retry timeout for the API wait to 2 seconds, opting to fail faster and start over. * Remove wait for leader from server creation. This wait can be added on a test by test basis now that the function is being exported. * Remove wait for anti-entropy sync. This is built into the existing WaitForSerfCheck func, so that can be used if the anti-entropy wait is needed	5 years ago
Matt Keeler	3145bf5230	Centralized Config CLI (#5731 ) * Add HTTP endpoints for config entry management * Finish implementing decoding in the HTTP Config entry apply endpoint * Add CAS operation to the config entry apply endpoint Also use this for the bootstrapping and move the config entry decoding function into the structs package. * First pass at the API client for the config entries * Fixup some of the ConfigEntry APIs Return a singular response object instead of a list for the ConfigEntry.Get RPC. This gets plumbed through the HTTP API as well. Dont return QueryMeta in the JSON response for the config entry listing HTTP API. Instead just return a list of config entries. * Minor API client fixes * Attempt at some ConfigEntry api client tests These don’t currently work due to weak typing in JSON * Get some of the api client tests passing * Implement reflectwalk magic to correct JSON encoding a ProxyConfigEntry Also added a test for the HTTP endpoint that exposes the problem. However, since the test doesn’t actually do the JSON encode/decode its still failing. * Move MapWalk magic into a binary marshaller instead of JSON. * Add a MapWalk test * Get rid of unused func * Get rid of unused imports * Fixup some tests now that the decoding from msgpack coerces things into json compat types * Stub out most of the central config cli Fully implement the config read command. * Basic config delete command implementation * Implement config write command * Implement config list subcommand Not entirely sure about the output here. Its basically the read output indented with a line specifying the kind/name of each type which is also duplicated in the indented output. * Update command usage * Update some help usage formatting * Add the connect enable helper cli command * Update list command output * Rename the config entry API client methods. * Use renamed apis * Implement config write tests Stub the others with the noTabs tests. * Change list output format Now just simply output 1 line per named config * Add config read tests * Add invalid args write test. * Add config delete tests * Add config list tests * Add connect enable tests * Update some CLI commands to use CAS ops This also modifies the HTTP API for a write op to return a boolean indicating whether the value was written or not. * Fix up the HTTP API CAS tests as I realized they weren’t testing what they should. * Update config entry rpc tests to properly test CAS * Fix up a few more tests * Fix some tests that using ConfigEntries.Apply * Update config_write_test.go * Get rid of unused import	6 years ago
Jeff Mitchell	4243c3ae42	Move internal/ to sdk/ (#5568 ) * Move internal/ to sdk/ * Add a readme to the SDK folder	6 years ago

1 2

74 Commits (HCPCP-1619-unix-socket-host)