60 Commits (CSLC-103-egress-gtwy-cert-tgtwy)

Author	SHA1	Message	Date
Freddy	74ca6406ea	Configure upstream TLS context with peer root certs (#13321) ... For mTLS to work between two proxies in peered clusters with different root CAs, proxies need to configure their outbound listener to use different root certificates for validation. Up until peering was introduced proxies would only ever use one set of root certificates to validate all mesh traffic, both inbound and outbound. Now an upstream proxy may have a leaf certificate signed by a CA that's different from the dialing proxy's. This PR makes changes to proxycfg and xds so that the upstream TLS validation uses different root certificates depending on which cluster is being dialed.	3 years ago
Mark Anderson	98a2e282be	Fixup acl.EnterpriseMeta ... Signed-off-by: Mark Anderson <manderson@hashicorp.com>	3 years ago
R.B. Boyer	ac5bea862a	server: ensure that service-defaults meta is incorporated into the discovery chain response (#12511) ... Also add a new "Default" field to the discovery chain response to clients	3 years ago
freddygv	cbea3d203c	Fix race of upstreams with same passthrough ip ... Due to timing, a transparent proxy could have two upstreams to dial directly with the same address. For example: - The orders service can dial upstreams shipping and payment directly. - An instance of shipping at address 10.0.0.1 is deregistered. - Payments is scaled up and scheduled to have address 10.0.0.1. - The orders service receives the event for the new payments instance before seeing the deregistration for the shipping instance. At this point two upstreams have the same passthrough address and Envoy will reject the listener configuration. To disambiguate this commit considers the Raft index when storing passthrough addresses. In the example above, 10.0.0.1 would only be associated with the newer payments service instance.	3 years ago
R.B. Boyer	424f3cdd2c	proxycfg: introduce explicit UpstreamID in lieu of bare string (#12125) ... The gist here is that now we use a value-type struct proxycfg.UpstreamID as the map key in ConfigSnapshot maps where we used to use "upstream id-ish" strings. These are internal only and used just for bidirectional trips through the agent cache keyspace (like the discovery chain target struct). For the few places where the upstream id needs to be projected into xDS, that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS inject the partition and namespace into these things without making stuff like the golden testdata diverge.	3 years ago
freddygv	c5c290c503	Validate chains are associated with upstreams ... Previously we could get into a state where discovery chain entries were not cleaned up after the associated watch was cancelled. These changes add handling for that case where stray chain references are encountered.	3 years ago
Daniel Upton	50a1f20ff9	xds: prefer fed state gateway definitions if they're fresher (#11522) ... Fixes an issue described in #10132, where if two DCs are WAN federated over mesh gateways, and the gateway in the non-primary DC is terminated and receives a new IP address (as is commonly the case when running them on ephemeral compute instances) the primary DC is unable to re-establish its connection until the agent running on its own gateway is restarted. This was happening because we always preferred gateways discovered by the `Internal.ServiceDump` RPC (which would fail because there's no way to dial the remote DC) over those discovered in the federation state, which is replicated as long as the primary DC's gateway is reachable.	3 years ago
freddygv	90ce897456	Store GatewayKey in proxycfg snapshot for re-use	3 years ago
freddygv	bbe46e9522	Update locality check in xds	3 years ago
freddygv	c72bbb6e8d	Split up locality check from hostname check	3 years ago
freddygv	448701dbd8	Replace default partition check	3 years ago
freddygv	12923f5ebc	PR comments	3 years ago
freddygv	a33b6923e0	Account for partitions in xds gen for mesh gw ... This commit avoids skipping gateways in remote partitions of the local DC when generating listeners/clusters/endpoints.	3 years ago
freddygv	935112a47a	Account for partition in SNI for gateways	3 years ago
freddygv	110fae820a	Update xds pkg to account for GatewayKey	3 years ago
freddygv	8006c6df73	Swap in structs.EqualPartitions for cmp	3 years ago
freddygv	e1691d1627	Update XDS for sidecars dialing through gateways	3 years ago
Dhia Ayachi	09197c989c	add partition to SNI when partition is non default (#10917)	3 years ago
Mark Anderson	8040f91a43	Add support for downstreams ... Enhance config by adding SocketPath and LocalSocketPath config values Supports syntax of the form: ``` services { name = "sock_forwarder" id = "sock_forwarder.1" socket_path = "/tmp/downstream_3.sock" connect { sidecar_service { proxy { local_service_socket_path = "/tmp/downstream.sock" } } } } ``` Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
R.B. Boyer	71d45a3460	Support Incremental xDS mode (#9855) ... This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time	4 years ago
freddygv	f4f45af6d0	Merge master and fix upstream config protocol defaulting	4 years ago
freddygv	8a062e1546	Handle prepared queries in Upstreams loop and escape hatches in disco chain loop	4 years ago
freddygv	ce964f8ea5	Update xds for transparent proxy	4 years ago
freddygv	8b46d8dcbb	Restore old Envoy prefix on escape hatches ... This is done because after removing ID and NodeName from ServiceConfigRequest we will no longer know whether a request coming in is for a Consul client earlier than v1.10.	4 years ago
freddygv	1710ec87d2	finish moving UpstreamConfig and related fields to structs pkg	4 years ago
R.B. Boyer	398b766532	xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) ... - Also add support for envoy 1.17.0	4 years ago
R.B. Boyer	3b6ffc447b	xds: remove deprecated usages of xDS (#9602) ... Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425	4 years ago
R.B. Boyer	1eef096dfe	xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222) ... - cut down on extra node metadata transmission - split the golden file generation to compare all envoy version	4 years ago
Daniel Nephin	010a609912	Fix a bunch of unparam lint issues	4 years ago
R.B. Boyer	c63c994b04	connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165)	4 years ago
freddygv	19e3954603	Move compound service names to use ServiceName type	5 years ago
Freddy	9ed325ba8b	Enable gateways to resolve hostnames to IPv4 addresses (#7999) ... The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option. If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS. Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.	5 years ago
Raphaël Rondeau	0d2f178b7b	connect: fix endpoints clusterName when using cluster escape hatch (#7319) ... ```changelog * fix(connect): fix endpoints clusterName when using cluster escape hatch ```	5 years ago
Daniel Nephin	9f27d61bee	Remove unused var ... The usage was removed in 8e22d80e35, however it seems there may be a bug here because the cluster name is not updated when the target changes.	5 years ago
Daniel Nephin	c662f0f0de	Fix a number of problems found by staticcheck ... Some of these problems are minor (unused vars), but others are real bugs (ignored errors). Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>	5 years ago
Kyle Havlovitz	711d1389aa	Support multiple listeners referencing the same service in gateway definitions	5 years ago
Kyle Havlovitz	247f9eaf13	Allow ingress gateways to route traffic based on Host header ... This commit adds the necessary changes to allow an ingress gateway to route traffic from a single defined port to multiple different upstream services in the Consul mesh. To do this, we now require all HTTP requests coming into the ingress gateway to specify a Host header that matches "<service-name>.*" in order to correctly route traffic to the correct service. - Differentiate multiple listener's route names by port - Adds a case in xds for allowing default discovery chains to create a route configuration when on an ingress gateway. This allows default services to easily use host header routing - ingress-gateways have a single route config for each listener that utilizes domain matching to route to different services.	5 years ago
freddygv	913b13f31f	Add subset support	5 years ago
freddygv	219c78e586	Add xds cluster/listener/endpoint management	5 years ago
Chris Piraino	ecc8a2d6f7	Allow ingress gateways to route through mesh gateways ... - Adds integration test for mesh gateways local + remote modes with ingress - ingress golden files updated for mesh gateway endpoints	5 years ago
Kyle Havlovitz	e9e8c0e730	Ingress Gateways for TCP services (#7509) ... * Implements a simple, tcp ingress gateway workflow This adds a new type of gateway for allowing Ingress traffic into Connect from external services. Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
Daniel Nephin	1d90ecc31d	Remove unused token parameter	5 years ago
R.B. Boyer	6adad71125	wan federation via mesh gateways (#6884) ... This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.	5 years ago
Matt Keeler	4c9577678e	xDS Mesh Gateway Resolver Subset Fixes (#7294) ... * xDS Mesh Gateway Resolver Subset Fixes The first fix was that clusters were being generated for every service resolver subset regardless of there being any service instances of the associated service in that dc. The previous logic didn’t care at all but now it will omit generating those clusters unless we also have service instances that should be proxied. The second fix was to respect the DefaultSubset of a service resolver so that mesh-gateways would configure the endpoints of the unnamed subset cluster to only those endpoints matched by the default subsets filters. * Refactor the gateway endpoint generation to be a little easier to read	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116)	5 years ago
R.B. Boyer	561b2fe606	connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340)	5 years ago
R.B. Boyer	8e22d80e35	connect: fix failover through a mesh gateway to a remote datacenter (#6259) ... Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).	5 years ago
R.B. Boyer	c395affc93	connect: expose an API endpoint to compile the discovery chain (#6248) ... In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand. Also removed ability to configure the envoy OverprovisioningFactor.	5 years ago
R.B. Boyer	f02924fafe	connect: simplify the compiled discovery chain data structures (#6242) ... This should make them better for sending over RPC or the API. Instead of a chain implemented explicitly like a linked list (nodes holding pointers to other nodes) instead switch to a flat map of named nodes with nodes linking other other nodes by name. The shipped structure is just a map and a string to indicate which key to start from. Other changes: * inline the compiler option InferDefaults as true * introduce compiled target config to avoid needing to send back additional maps of Resolvers; future target-specific compiled state can go here * move compiled MeshGateway out of the Resolver and into the TargetConfig where it makes more sense.	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225) ... * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago