33 Commits (18831-backport1.14.10)

Author	SHA1	Message	Date
malizz	842139f5b5	backport pr 15979 into 1.14.x (#17287) ... * backport pr 15979 into 1.14.x * update protobuf package and update protos	2 years ago
hc-github-team-consul-core	7c0eec4c1f	Add support for configuring Envoys route idle_timeout (#14340) (#15611) ... * Add idleTimeout Co-authored-by: James Oulman <oulman@users.noreply.github.com> Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>	2 years ago
Kyle Havlovitz	aaf892a383	Extend tcp keepalive settings to work for terminating gateways as well	2 years ago
Kyle Havlovitz	2c569f6b9c	Update docs and add tcp_keepalive_probes setting	2 years ago
Kyle Havlovitz	2242d1ec4a	Add TCP keepalive settings to proxy config for mesh gateways	2 years ago
Derek Menteer	aa4709ab74	Add envoy connection balancing. (#14616) ... Add envoy connection balancing config.	2 years ago
malizz	b3ac8f48ca	Add additional parameters to envoy passive health check config (#14238) ... * draft commit * add changelog, update test * remove extra param * fix test * update type to account for nil value * add test for custom passive health check * update comments and tests * update description in docs * fix missing commas	2 years ago
Jorge Marey	3f3bb8831e	Fix typos. Add test. Add documentation	2 years ago
Jorge Marey	ed7b34128f	Add new tracing configuration	2 years ago
Kyle Havlovitz	f2fbe8aec9	Fix proto lint errors after version bump	3 years ago
Kyle Havlovitz	4bc6c23357	Add connection limit setting to service defaults	3 years ago
R.B. Boyer	71d45a3460	Support Incremental xDS mode (#9855) ... This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time	4 years ago
freddygv	e3dc2a49df	Turn Limits and PassiveHealthChecks into pointers	4 years ago
freddygv	1710ec87d2	finish moving UpstreamConfig and related fields to structs pkg	4 years ago
freddygv	87cde19b4c	Create new types for service-defaults upstream cfg	4 years ago
R.B. Boyer	398b766532	xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) ... - Also add support for envoy 1.17.0	4 years ago
R.B. Boyer	3b6ffc447b	xds: remove deprecated usages of xDS (#9602) ... Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425	4 years ago
Chris Boulton	8a35df81c7	connect: add local_request_timeout_ms to configure local_app http timeouts (#9554)	4 years ago
R.B. Boyer	c63c994b04	connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165)	4 years ago
Daniel Nephin	75cbbe2702	config: add HookWeakDecodeFromSlice ... Currently opaque config blocks (config entries, and CA provider config) are modified by PatchSliceOfMaps, making it impossible for these opaque config sections to contain slices of maps. In order to fix this problem, any lazy-decoding of these blocks needs to support weak decoding of []map[string]interface{} to a struct type before PatchSliceOfMaps is replaces. This is necessary because these config blobs are persisted, and during an upgrade an older version of Consul could read one of the new configuration values, which would cause an error. To support the upgrade path, this commit first introduces the new hooks for weak decoding of []map[string]interface{} and uses them only in the lazy-decode paths. That way, in a future release, new style configuration will be supported by the older version of Consul. This decode hook has a number of advantages: 1. It no longer panics. It allows mapstructure to report the error 2. It no longer requires the user to declare which fields are slices of structs. It can deduce that information from the 'to' value. 3. It will make it possible to preserve opaque configuration, allowing for structured opaque config.	5 years ago
Freddy	9ed325ba8b	Enable gateways to resolve hostnames to IPv4 addresses (#7999) ... The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option. If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS. Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.	5 years ago
Daniel Nephin	6a2d7d77c0	config: use the new HookTranslateKeys instead of lib.TranslateKeys ... With the exception of CA provider config, which will be migrated at some later time.	5 years ago
Daniel Nephin	8ced4300c8	Add alias struct tags for new decode hook	5 years ago
Daniel Nephin	5655d7f34e	Add outlier_detection check to integration test ... Fix decoding of time.Duration types.	5 years ago
Daniel Nephin	eaa05d623a	xds: Add passive health check config for upstreams	5 years ago
Freddy	18d356899c	Enable CLI to register terminating gateways (#7500) ... * Enable CLI to register terminating gateways * Centralize gateway proxy configuration	5 years ago
Chris Piraino	f3b54fa535	Allow configuration of upstream connection limits in Envoy (#6829) ... * Adds 'limits' field to the upstream configuration of a connect proxy This allows a user to configure the envoy connect proxy with 'max_connections', 'max_queued_requests', and 'max_concurrent_requests'. These values are defined in the local proxy on a per-service instance basis and should thus NOT be thought of as a global-level or even service-level value.	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
R.B. Boyer	7a6faccf2f	docs: document how envoy escape hatches work with the discovery chain (#6350) ... - Bootstrap escape hatches are OK. - Public listener/cluster escape hatches are OK. - Upstream listener/cluster escape hatches are not supported. If an unsupported escape hatch is configured and the discovery chain is activated log a warning and act like it was not configured. Fixes #6160	5 years ago
Jack Pearkes	e6f1b78efb	Make cluster names SNI always (#6081) ... * Make cluster names SNI always * Update some tests * Ensure we check for prepared query types * Use sni for route cluster names * Proper mesh gateway mode defaulting when the discovery chain is used * Ignore service splits from PatchSliceOfMaps * Update some xds golden files for proper test output * Allow for grpc/http listeners/cluster configs with the disco chain * Update stats expectation	5 years ago
Michael Schurter	b5aab27c21	connect: allow overriding envoy listener bind_address (#6033) ... * connect: allow overriding envoy listener bind_address * Update agent/xds/config.go Co-Authored-By: Kyle Havlovitz <kylehav@gmail.com> * connect: allow overriding envoy listener bind_port * envoy: support unix sockets for grpc in bootstrap Add AgentSocket BootstrapTplArgs which if set overrides the AgentAddress and AgentPort to generate a bootstrap which points Envoy to a unix socket file instead of an ip:port. * Add a test for passing the consul addr as a unix socket * Fix config formatting for envoy bootstrap tests * Fix listeners test cases for bind addr/port * Update website/source/docs/connect/proxies/envoy.md	5 years ago
Matt Keeler	8d953f5840	Implement Mesh Gateways ... This includes both ingress and egress functionality.	5 years ago
Paul Banks	421ecd32fc	Connect: allow configuring Envoy for L7 Observability (#5558) ... * Add support for HTTP proxy listeners * Add customizable bootstrap configuration options * Debug logging for xDS AuthZ * Add Envoy Integration test suite with basic test coverage * Add envoy command tests to cover new cases * Add tracing integration test * Add gRPC support WIP * Merged changes from master Docker. get CI integration to work with same Dockerfile now * Make docker build optional for integration * Enable integration tests again! * http2 and grpc integration tests and fixes * Fix up command config tests * Store all container logs as artifacts in circle on fail * Add retries to outer part of stats measurements as we keep missing them in CI * Only dump logs on failing cases * Fix typos from code review * Review tidying and make tests pass again * Add debug logs to exec test. * Fix legit test failure caused by upstream rename in envoy config * Attempt to reduce cases of bad TLS handshake in CI integration tests * bring up the right service * Add prometheus integration test * Add test for denied AuthZ both HTTP and TCP * Try ANSI term for Circle	6 years ago