You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
consul/agent/xds/endpoints.go

367 lines
11 KiB

package xds
import (
"errors"
"fmt"
envoy "github.com/envoyproxy/go-control-plane/envoy/api/v2"
envoycore "github.com/envoyproxy/go-control-plane/envoy/api/v2/core"
envoyendpoint "github.com/envoyproxy/go-control-plane/envoy/api/v2/endpoint"
"github.com/gogo/protobuf/proto"
"github.com/hashicorp/consul/agent/connect"
"github.com/hashicorp/consul/agent/proxycfg"
"github.com/hashicorp/consul/agent/structs"
"github.com/hashicorp/consul/api"
bexpr "github.com/hashicorp/go-bexpr"
)
// endpointsFromSnapshot returns the xDS API representation of the "endpoints"
func (s *Server) endpointsFromSnapshot(cfgSnap *proxycfg.ConfigSnapshot, token string) ([]proto.Message, error) {
if cfgSnap == nil {
return nil, errors.New("nil config given")
}
switch cfgSnap.Kind {
case structs.ServiceKindConnectProxy:
return s.endpointsFromSnapshotConnectProxy(cfgSnap, token)
case structs.ServiceKindMeshGateway:
return s.endpointsFromSnapshotMeshGateway(cfgSnap, token)
default:
return nil, fmt.Errorf("Invalid service kind: %v", cfgSnap.Kind)
}
}
// endpointsFromSnapshotConnectProxy returns the xDS API representation of the "endpoints"
// (upstream instances) in the snapshot.
func (s *Server) endpointsFromSnapshotConnectProxy(cfgSnap *proxycfg.ConfigSnapshot, token string) ([]proto.Message, error) {
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
resources := make([]proto.Message, 0,
len(cfgSnap.ConnectProxy.PreparedQueryEndpoints)+len(cfgSnap.ConnectProxy.WatchedUpstreamEndpoints))
for _, u := range cfgSnap.Proxy.Upstreams {
id := u.Identifier()
var chain *structs.CompiledDiscoveryChain
if u.DestinationType != structs.UpstreamDestTypePreparedQuery {
chain = cfgSnap.ConnectProxy.DiscoveryChain[id]
}
if chain == nil {
// We ONLY want this branch for prepared queries.
dc := u.Datacenter
if dc == "" {
dc = cfgSnap.Datacenter
}
clusterName := connect.UpstreamSNI(&u, "", dc, cfgSnap.Roots.TrustDomain)
endpoints, ok := cfgSnap.ConnectProxy.PreparedQueryEndpoints[id]
if ok {
la := makeLoadAssignment(
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
5 years ago
clusterName,
[]loadAssignmentEndpointGroup{
{Endpoints: endpoints},
},
cfgSnap.Datacenter,
)
resources = append(resources, la)
}
} else {
// Newfangled discovery chain plumbing.
// Find all resolver nodes.
for _, node := range chain.Nodes {
if node.Type != structs.DiscoveryGraphNodeTypeResolver {
continue
}
failover := node.Resolver.Failover
targetID := node.Resolver.Target
target := chain.Targets[targetID]
clusterName := CustomizeClusterName(target.Name, chain)
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
// Determine if we have to generate the entire cluster differently.
failoverThroughMeshGateway := chain.WillFailoverThroughMeshGateway(node)
if failoverThroughMeshGateway {
actualTargetID := firstHealthyTarget(
chain.Targets,
cfgSnap.ConnectProxy.WatchedUpstreamEndpoints[id],
targetID,
failover.Targets,
)
if actualTargetID != targetID {
targetID = actualTargetID
target = chain.Targets[actualTargetID]
}
failover = nil
}
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
primaryGroup, valid := makeLoadAssignmentEndpointGroup(
chain.Targets,
cfgSnap.ConnectProxy.WatchedUpstreamEndpoints[id],
cfgSnap.ConnectProxy.WatchedGatewayEndpoints[id],
targetID,
cfgSnap.Datacenter,
)
if !valid {
continue // skip the cluster if we're still populating the snapshot
}
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
var endpointGroups []loadAssignmentEndpointGroup
if failover != nil && len(failover.Targets) > 0 {
endpointGroups = make([]loadAssignmentEndpointGroup, 0, len(failover.Targets)+1)
endpointGroups = append(endpointGroups, primaryGroup)
for _, failTargetID := range failover.Targets {
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
failoverGroup, valid := makeLoadAssignmentEndpointGroup(
chain.Targets,
cfgSnap.ConnectProxy.WatchedUpstreamEndpoints[id],
cfgSnap.ConnectProxy.WatchedGatewayEndpoints[id],
failTargetID,
cfgSnap.Datacenter,
)
if !valid {
continue // skip the failover target if we're still populating the snapshot
}
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
endpointGroups = append(endpointGroups, failoverGroup)
}
} else {
endpointGroups = append(endpointGroups, primaryGroup)
}
la := makeLoadAssignment(
connect: reconcile how upstream configuration works with discovery chains (#6225) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159
5 years ago
clusterName,
endpointGroups,
cfgSnap.Datacenter,
)
resources = append(resources, la)
}
}
}
return resources, nil
}
func (s *Server) endpointsFromSnapshotMeshGateway(cfgSnap *proxycfg.ConfigSnapshot, token string) ([]proto.Message, error) {
resources := make([]proto.Message, 0, len(cfgSnap.MeshGateway.GatewayGroups)+len(cfgSnap.MeshGateway.ServiceGroups))
// generate the endpoints for the gateways in the remote datacenters
for dc, endpoints := range cfgSnap.MeshGateway.GatewayGroups {
clusterName := connect.DatacenterSNI(dc, cfgSnap.Roots.TrustDomain)
la := makeLoadAssignment(
clusterName,
[]loadAssignmentEndpointGroup{
{Endpoints: endpoints},
},
cfgSnap.Datacenter,
)
resources = append(resources, la)
}
// generate the endpoints for the local service groups
for svc, endpoints := range cfgSnap.MeshGateway.ServiceGroups {
clusterName := connect.ServiceSNI(svc.ID, "", svc.NamespaceOrDefault(), cfgSnap.Datacenter, cfgSnap.Roots.TrustDomain)
la := makeLoadAssignment(
clusterName,
[]loadAssignmentEndpointGroup{
{Endpoints: endpoints},
},
cfgSnap.Datacenter,
)
resources = append(resources, la)
}
// generate the endpoints for the service subsets
for svc, resolver := range cfgSnap.MeshGateway.ServiceResolvers {
for subsetName, subset := range resolver.Subsets {
clusterName := connect.ServiceSNI(svc.ID, subsetName, svc.NamespaceOrDefault(), cfgSnap.Datacenter, cfgSnap.Roots.TrustDomain)
endpoints := cfgSnap.MeshGateway.ServiceGroups[svc]
// locally execute the subsets filter
if subset.Filter != "" {
filter, err := bexpr.CreateFilter(subset.Filter, nil, endpoints)
if err != nil {
return nil, err
}
raw, err := filter.Execute(endpoints)
if err != nil {
return nil, err
}
endpoints = raw.(structs.CheckServiceNodes)
}
la := makeLoadAssignment(
clusterName,
[]loadAssignmentEndpointGroup{
{
Endpoints: endpoints,
OnlyPassing: subset.OnlyPassing,
},
},
cfgSnap.Datacenter,
)
resources = append(resources, la)
}
}
return resources, nil
}
func makeEndpoint(clusterName, host string, port int) envoyendpoint.LbEndpoint {
return envoyendpoint.LbEndpoint{
HostIdentifier: &envoyendpoint.LbEndpoint_Endpoint{
Endpoint: &envoyendpoint.Endpoint{
Address: makeAddressPtr(host, port),
},
},
}
}
type loadAssignmentEndpointGroup struct {
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
Endpoints structs.CheckServiceNodes
OnlyPassing bool
OverrideHealth envoycore.HealthStatus
}
func makeLoadAssignment(clusterName string, endpointGroups []loadAssignmentEndpointGroup, localDatacenter string) *envoy.ClusterLoadAssignment {
cla := &envoy.ClusterLoadAssignment{
ClusterName: clusterName,
Endpoints: make([]envoyendpoint.LocalityLbEndpoints, 0, len(endpointGroups)),
}
if len(endpointGroups) > 1 {
cla.Policy = &envoy.ClusterLoadAssignment_Policy{
// We choose such a large value here that the failover math should
// in effect not happen until zero instances are healthy.
OverprovisioningFactor: makeUint32Value(100000),
}
}
for priority, endpointGroup := range endpointGroups {
endpoints := endpointGroup.Endpoints
es := make([]envoyendpoint.LbEndpoint, 0, len(endpoints))
for _, ep := range endpoints {
// TODO (mesh-gateway) - should we respect the translate_wan_addrs configuration here or just always use the wan for cross-dc?
addr, port := ep.BestAddress(localDatacenter != ep.Node.Datacenter)
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
healthStatus, weight := calculateEndpointHealthAndWeight(ep, endpointGroup.OnlyPassing)
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
if endpointGroup.OverrideHealth != envoycore.HealthStatus_UNKNOWN {
healthStatus = endpointGroup.OverrideHealth
}
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
es = append(es, envoyendpoint.LbEndpoint{
HostIdentifier: &envoyendpoint.LbEndpoint_Endpoint{
Endpoint: &envoyendpoint.Endpoint{
Address: makeAddressPtr(addr, port),
},
},
HealthStatus: healthStatus,
LoadBalancingWeight: makeUint32Value(weight),
})
}
cla.Endpoints = append(cla.Endpoints, envoyendpoint.LocalityLbEndpoints{
Priority: uint32(priority),
LbEndpoints: es,
})
}
return cla
}
connect: fix failover through a mesh gateway to a remote datacenter (#6259) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).
5 years ago
func makeLoadAssignmentEndpointGroup(
targets map[string]*structs.DiscoveryTarget,
targetHealth map[string]structs.CheckServiceNodes,
gatewayHealth map[string]structs.CheckServiceNodes,
targetID string,
currentDatacenter string,
) (loadAssignmentEndpointGroup, bool) {
realEndpoints, ok := targetHealth[targetID]
if !ok {
// skip the cluster if we're still populating the snapshot
return loadAssignmentEndpointGroup{}, false
}
target := targets[targetID]
var gatewayDatacenter string
switch target.MeshGateway.Mode {
case structs.MeshGatewayModeRemote:
gatewayDatacenter = target.Datacenter
case structs.MeshGatewayModeLocal:
gatewayDatacenter = currentDatacenter
}
if gatewayDatacenter == "" {
return loadAssignmentEndpointGroup{
Endpoints: realEndpoints,
OnlyPassing: target.Subset.OnlyPassing,
}, true
}
// If using a mesh gateway we need to pull those endpoints instead.
gatewayEndpoints, ok := gatewayHealth[gatewayDatacenter]
if !ok {
// skip the cluster if we're still populating the snapshot
return loadAssignmentEndpointGroup{}, false
}
// But we will use the health from the actual backend service.
overallHealth := envoycore.HealthStatus_UNHEALTHY
for _, ep := range realEndpoints {
health, _ := calculateEndpointHealthAndWeight(ep, target.Subset.OnlyPassing)
if health == envoycore.HealthStatus_HEALTHY {
overallHealth = envoycore.HealthStatus_HEALTHY
break
}
}
return loadAssignmentEndpointGroup{
Endpoints: gatewayEndpoints,
OverrideHealth: overallHealth,
}, true
}
func calculateEndpointHealthAndWeight(
ep structs.CheckServiceNode,
onlyPassing bool,
) (envoycore.HealthStatus, int) {
healthStatus := envoycore.HealthStatus_HEALTHY
weight := 1
if ep.Service.Weights != nil {
weight = ep.Service.Weights.Passing
}
for _, chk := range ep.Checks {
if chk.Status == api.HealthCritical {
healthStatus = envoycore.HealthStatus_UNHEALTHY
}
if onlyPassing && chk.Status != api.HealthPassing {
healthStatus = envoycore.HealthStatus_UNHEALTHY
}
if chk.Status == api.HealthWarning && ep.Service.Weights != nil {
weight = ep.Service.Weights.Warning
}
}
// Make weights fit Envoy's limits. A zero weight means that either Warning
// (likely) or Passing (weirdly) weight has been set to 0 effectively making
// this instance unhealthy and should not be sent traffic.
if weight < 1 {
healthStatus = envoycore.HealthStatus_UNHEALTHY
weight = 1
}
if weight > 128 {
weight = 128
}
return healthStatus, weight
}