# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Tatsuhiro Tsujikawa
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: aria2 0.11.2\n"
"Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n"
"POT-Creation-Date: 2009-06-07 17:21+0900\n"
"PO-Revision-Date: 2008-12-17 00:40+0900\n"
"Last-Translator: willemijns <Unknown>\n"
"Language-Team: Fran&ccedil;ais\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2008-12-16 15:16+0000\n"
"X-Generator: Launchpad (build Unknown)\n"

#: src/DownloadEngine.cc:209
msgid ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."
msgstr ""
"Séquence d'arrêt débutée... Pressez Ctrl-C une nouvelle fois pour un arrêt "
"d'urgence."

#: src/DownloadEngine.cc:215
msgid "Emergency shutdown sequence commencing..."
msgstr "Séquence d'arrêt d'urgence débutée..."

#: src/MultiUrlRequestInfo.cc:96
msgid "aria2 will resume download if the transfer is restarted."
msgstr "aria2c va recommencer ce téléchargement si le transfert est relancé."

#: src/MultiUrlRequestInfo.cc:98
msgid ""
"If there are any errors, then see the log file. See '-l' option in help/man "
"page for details."
msgstr ""
"En cas d'érreurs, merci de lire le fichier log. Voir l'option '-l' pour plus "
"d'informations."

#: src/RequestGroupMan.cc:560
msgid "Download Results:"
msgstr "Résultats du ou des téléchargements:"

#: src/RequestGroupMan.cc:604
msgid "Status Legend:"
msgstr "Légende du statut:"

#: src/OptionHandler.cc:38
msgid "                              Default: "
msgstr "                              Par défaut: "

#: src/OptionHandler.cc:39
msgid "                              Tags: "
msgstr "                              Signets: "

#: src/OptionHandler.cc:40
msgid "                              Possible Values: "
msgstr "                              Valeurs possibles: "

#: src/OptionHandlerImpl.h:131
msgid "must be either 'true' or 'false'."
msgstr "doit contenir comme valeur soit \"true\" ou \"false\""

#: src/OptionHandlerImpl.h:165 src/OptionHandlerImpl.h:214
#, c-format
msgid "must be between %s and %s."
msgstr "doit être compris entre %s et %s"

#: src/OptionHandlerImpl.h:211
#, c-format
msgid "must be smaller than or equal to %s."
msgstr "doit être plus petit ou égal à %s"

#: src/OptionHandlerImpl.h:217
#, c-format
msgid "must be greater than or equal to %s."
msgstr "doit être plus grand ou égal à %s"

#: src/OptionHandlerImpl.h:220 src/OptionHandlerImpl.h:298
msgid "must be a number."
msgstr "doit être un nombre"

#: src/OptionHandlerImpl.h:289
#, c-format
msgid "must be smaller than or equal to %.1f."
msgstr "doit être plus petit ou égal à %.1f."

#: src/OptionHandlerImpl.h:292
#, c-format
msgid "must be between %.1f and %.1f."
msgstr "doit être compris entre %.1f et %.1f."

#: src/OptionHandlerImpl.h:295
#, c-format
msgid "must be greater than or equal to %.1f."
msgstr "doit être plus grand ou égal à %.1f."

#: src/OptionHandlerImpl.h:473
msgid "must be one of the following:"
msgstr "doit être l'une de ces valeurs suivantes:"

#: src/OptionHandlerImpl.h:522 src/OptionHandlerImpl.h:565
msgid "unrecognized proxy format"
msgstr "format de proxy non reconnu"

#: src/usage_text.h:37
msgid ""
" -d, --dir=DIR                The directory to store the downloaded file."
msgstr " -d, --dir=DIR                Le dossier pour enregistrer le fichier."

#: src/usage_text.h:39
msgid " -o, --out=FILE               The file name of the downloaded file."
msgstr ""
" -o, --out=FILE               Le nom de fichier pour le fichier téléchargé."

#: src/usage_text.h:41
msgid ""
" -l, --log=LOG                The file name of the log file. If '-' is\n"
"                              specified, log is written to stdout."
msgstr ""
" -l, --log=LOG                Le chemin du fichier pour enregistrer le log. "
"Si '-' est spécifié,\n"
"                              le log est redirigé vers stdout."

#: src/usage_text.h:44
msgid " -D, --daemon                 Run as daemon."
msgstr " -D, --daemon                 Exécuter en tant que service."

#: src/usage_text.h:46
msgid ""
" -s, --split=N                Download a file using N connections. If more\n"
"                              than N URLs are given, first N URLs are used "
"and\n"
"                              remaining URLs are used for backup. If less "
"than\n"
"                              N URLs are given, those URLs are used more "
"than\n"
"                              once so that N connections total are made\n"
"                              simultaneously. Please see -j option too.\n"
"                              Please note that in Metalink download, this\n"
"                              option has no effect and use -C option instead."
msgstr ""

#: src/usage_text.h:55
msgid ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured."
msgstr ""
" --retry-wait=SEC             Indique le nombre de secondes à attendre "
"avant\n"
"                                            de réessayer après qu'une érreur "
"soit survenue."

#: src/usage_text.h:58
msgid " -t, --timeout=SEC            Set timeout in seconds."
msgstr " -t, --timeout=SEC Indique le timeout en secondes."

#: src/usage_text.h:60
msgid " -m, --max-tries=N            Set number of tries. 0 means unlimited."
msgstr ""
" -m, --max-tries=N            Indique le nombre d'éssais. 0 signifiant "
"illimité."

#: src/usage_text.h:62
msgid ""
" --http-proxy=PROXY           Use this proxy server for HTTP.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --http-proxy=PROXY           Utilise ce serveur proxy pour le HTTP.\n"
"                              Voir aussi l'option \"--all-proxy\".\n"
"                              Cela affecte toutes les URLs."

#: src/usage_text.h:66
msgid ""
" --https-proxy=PROXY          Use this proxy server for HTTPS.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --https-proxy=PROXY           Utilise ce serveur proxy pour le HTTPS.\n"
"                              Voir aussi l'option \"--all-proxy\".\n"
"                              Cela affecte toutes les URLs."

#: src/usage_text.h:70
msgid ""
" --ftp-proxy=PROXY            Use this proxy server for FTP.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""

#: src/usage_text.h:74
msgid ""
" --all-proxy=PROXY            Use this proxy server for all protocols.\n"
"                              You can override this setting and specify a\n"
"                              proxy server for a particular protocol using\n"
"                              --http-proxy, --https-proxy and --ftp-proxy\n"
"                              options.\n"
"                              This affects all URLs."
msgstr ""

#: src/usage_text.h:81
msgid " --http-user=USER             Set HTTP user. This affects all URLs."
msgstr ""
" --http-user=USER             Définir un utilisateur HTTP. Ceci affecte tous "
"les URLs."

#: src/usage_text.h:83
msgid " --http-passwd=PASSWD         Set HTTP password. This affects all URLs."
msgstr ""
" --http-passwd=PASSWD         Définir un mot de passe HTTP. Ceci affecte "
"tous les URLs."

#: src/usage_text.h:85
msgid " --proxy-method=METHOD        Set the method to use in proxy request."
msgstr ""
" --proxy-method=METHOD        Permet de choisir la méthode à utiliser dans "
"les requêtes de proxy."

#: src/usage_text.h:87
msgid ""
" --http-auth-scheme=SCHEME    Set HTTP authentication scheme. Currently, "
"basic\n"
"                              is the only supported scheme."
msgstr ""
" --http-auth-scheme=SCHEME    Indique le schéma d'authentification HTTP.\n"
"                                                           En ce moment, "
"seul \"basic\" est supporté."

#: src/usage_text.h:90
msgid " --referer=REFERER            Set Referer. This affects all URLs."
msgstr ""
" --referer=REFERER            Définir le Référant. Ceci affecte tous les "
"URLs."

#: src/usage_text.h:92
msgid " --ftp-user=USER              Set FTP user. This affects all URLs."
msgstr ""
" --ftp-user=USER              Indique le nom de l'utilisateur FTP.\n"
"                                             ATTENTION ! cela affecte toutes "
"les URLs !"

#: src/usage_text.h:94
msgid " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs."
msgstr ""
" --ftp-passwd=PASSWD          Indique le mot de passe FTP de l'utilisateur.\n"
"                                             ATTENTION ! cela affecte toutes "
"les URLs !"

#: src/usage_text.h:96
msgid " --ftp-type=TYPE              Set FTP transfer type."
msgstr " --ftp-type=TYPE              Indique le type de transfert FTP."

#: src/usage_text.h:98
msgid ""
" -p, --ftp-pasv[=true|false]  Use the passive mode in FTP. If false is "
"given,\n"
"                              the active mode will be used."
msgstr ""

#: src/usage_text.h:101
msgid ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads."
msgstr ""

#: src/usage_text.h:107
#, fuzzy
msgid ""
" --max-overall-download-limit=SPEED Set max overall download speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the download speed per download, use\n"
"                              --max-download-limit option."
msgstr ""
" --max-download-limit=SPEED   Définir la vitesse maximale de téléchargement "
"en octets par sec.\n"
"                              0 veut dire illimité.\n"
"                              Vous pouvez ajouter K ou M(1K = 1024, 1M = "
"1024K).\n"
"                              Défaut: 0"

#: src/usage_text.h:113
#, fuzzy
msgid ""
" --max-download-limit=SPEED   Set max download speed per each download in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall download speed, use\n"
"                              --max-overall-download-limit option."
msgstr ""
" --max-download-limit=SPEED   Définir la vitesse maximale de téléchargement "
"en octets par sec.\n"
"                              0 veut dire illimité.\n"
"                              Vous pouvez ajouter K ou M(1K = 1024, 1M = "
"1024K).\n"
"                              Défaut: 0"

#: src/usage_text.h:119
msgid ""
" --file-allocation=METHOD     Specify file allocation method.\n"
"                              'none' doesn't pre-allocate file space. "
"'prealloc'\n"
"                              pre-allocates file space before download "
"begins.\n"
"                              This may take some time depending on the size "
"of\n"
"                              the file.\n"
"                              If you are using newer file systems such as "
"ext4\n"
"                              (with extents support), btrfs or xfs, 'falloc' "
"is\n"
"                              your best choice. It allocates large(few GiB)\n"
"                              files almost instantly. Don't use 'falloc' "
"with\n"
"                              legacy file systems such as ext3 because it "
"takes\n"
"                              almost same time as 'prealloc' and it blocks "
"aria2\n"
"                              entirely until allocation finishes. 'falloc' "
"may\n"
"                              not be available if your system doesn't have\n"
"                              posix_fallocate() function."
msgstr ""

#: src/usage_text.h:134
msgid ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --no-file-allocation-limit=SIZE Aucune allocation de fichier ne sera faite "
"pour les fichiers dont\n"
"                              la taille est plus petite que SIZE.\n"
"                              Vous pouvez ajouter K ou M(1K = 1024, 1M = "
"1024K)."

#: src/usage_text.h:138
msgid ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"
msgstr ""
" --enable-direct-io[=true|false] Active l'accès direct au disque qui diminue "
"l'usage du CPU pendant\n"
"                              l'allocation des fichiers.\n"
"                              Désactivé-le si vous rencontrer un quelconque "
"problème."

#: src/usage_text.h:142
#, fuzzy
msgid ""
" --allow-overwrite=true|false If false is given, and a file already exists "
"but\n"
"                              the corresponding control file (filename."
"aria2)\n"
"                              doesn't exist, then aria2 will not re-"
"download\n"
"                              the file. See also --auto-file-renaming option."
msgstr ""
" --allow-overwrite=true|false  Si cette option est définie comme false, "
"aria2 ne\n"
"                              télécharge pas un fichier qui existe déjà sur\n"
"                              l'ordinateur\n"
"                              Défaut: false"

#: src/usage_text.h:147
msgid ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."
msgstr ""
" --allow-piece-length-change=true|false Si false est choisi, aria2 annule le "
"téléchargement\n"
"                              quand la longueur d'une pièce est différente "
"d'une autre dans\n"
"                              un fichier de contrôle. Si true est choisi, "
"vous pouvez continuer\n"
"                              mais certaines progressions du téléchargement "
"seront perdues."

#: src/usage_text.h:152
msgid ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities."
msgstr ""

#: src/usage_text.h:156
msgid ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended."
msgstr ""

#: src/usage_text.h:162
msgid ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required."
msgstr ""

#: src/usage_text.h:173
msgid ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection."
msgstr ""
" --enable-http-keep-alive[=true|false] Active ou non les connexions "
"persistantes de HTTP/1.1"

#: src/usage_text.h:175
msgid " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining."
msgstr ""
" --enable-http-pipelining[=true|false] Active le \"HTTP/1.1 pipelining\"."

#: src/usage_text.h:177
#, fuzzy
msgid ""
" -V, --check-integrity[=true|false] Check file integrity by validating "
"piece\n"
"                              hashes. This option has effect only in "
"BitTorrent\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file. See also --bt-hash-check-seed "
"option."
msgstr ""
" --check-integrity=true|false Vérifier l'intégrité en utilisant le hash.\n"
"                              Cette option affecte les téléchargements "
"BitTorrent\n"
"                              et Metalink en sommant les blocks de données.\n"
"                              Utilisez cette option pour retélécharger des "
"portions endommagées\n"
"                              d'un fichier.\n"
"                              Il se peut que vous deviez spécifier l'option "
"--allow-overwrite=true\n"
"                              si le fichier .aria2 n'existe pas.\n"
"                              Défaut: false"

#: src/usage_text.h:183
#, fuzzy
msgid ""
" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n"
"                              --check-integrity option and file is "
"complete,\n"
"                              continue to seed file. If you want to check "
"file\n"
"                              and download it only when it is damaged or\n"
"                              incomplete, set this option to false.\n"
"                              This option has effect only on BitTorrent\n"
"                              download."
msgstr ""
" --check-integrity=true|false Vérifier l'intégrité en utilisant le hash.\n"
"                              Cette option affecte les téléchargements "
"BitTorrent\n"
"                              et Metalink en sommant les blocks de données.\n"
"                              Utilisez cette option pour retélécharger des "
"portions endommagées\n"
"                              d'un fichier.\n"
"                              Il se peut que vous deviez spécifier l'option "
"--allow-overwrite=true\n"
"                              si le fichier .aria2 n'existe pas.\n"
"                              Défaut: false"

#: src/usage_text.h:191
#, fuzzy
msgid ""
" --realtime-chunk-checksum=true|false  Validate chunk of data by "
"calculating\n"
"                              checksum while downloading a file if chunk\n"
"                              checksums are provided."
msgstr ""
" --realtime-chunk-checksum=true|false  Valider l'intégrité du fichier en "
"téléchargeant\n"
"                              un fichier en mode Metalink. Cette option "
"affecte\n"
"                              Metalink avec vérification d'intégrité.\n"
"                              Défaut: true"

#: src/usage_text.h:195
msgid ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."
msgstr ""
" -c, --continue               Continuer le téléchargement d'un fichier "
"téléchargé partiellement\n"
"                              Utilisez cette option pour reprendre un "
"téléchargement commencé par\n"
"                              un navigateur ou n'importe quel autre "
"programme\n"
"                              qui télécharge des fichiers de manière "
"séquencielle du début\n"
"                              En ce moment cette option s'applique aux\n"
"                              téléchargements http(s)/ftp."

#: src/usage_text.h:202
msgid " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."
msgstr ""
" -U, --user-agent=USER_AGENT  Définit le nom du programme pour les "
"téléchargements http(s)."

#: src/usage_text.h:204
msgid " -n, --no-netrc               Disables netrc support."
msgstr " -n, --no-netrc               Désactiver le support netrc."

#: src/usage_text.h:206
msgid ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when '-' is specified.\n"
"                              The additional out and dir options can be\n"
"                              specified after each line of URIs. This "
"optional\n"
"                              line must start with white space(s). See "
"INPUT\n"
"                              FILE section of man page for details."
msgstr ""

#: src/usage_text.h:215
msgid ""
" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads "
"for\n"
"                              every static (HTTP/FTP) URL, torrent and "
"metalink.\n"
"                              See also -s and -C options."
msgstr ""

#: src/usage_text.h:219
msgid ""
" --load-cookies=FILE          Load Cookies from FILE using the Firefox3 "
"format\n"
"                              and Mozilla/Firefox(1.x/2.x)/Netscape format."
msgstr ""
" --load-cookies=FILE          Charge les cookies (compatible Firefox3 et\n"
"                               Mozilla/Firefox(1.x/2.x)/Netscape)."

#: src/usage_text.h:222
msgid ""
" --save-cookies=FILE          Save Cookies to FILE in Mozilla/Firefox(1.x/2."
"x)/\n"
"                              Netscape format. If FILE already exists, it "
"is\n"
"                              overwritten. Session Cookies are also saved "
"and\n"
"                              their expiry values are treated as 0."
msgstr ""

#: src/usage_text.h:227
msgid ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."
msgstr ""
" -S, --show-files Afficher la liste de fichiers .torrent ou .metalink\n"
"                              et quitter. Des informations plus détaillés "
"seront listées\n"
"                              dans le cas de fichier torrent."

#: src/usage_text.h:231
msgid ""
" --select-file=INDEX...       Set file to download by specifying its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: \"3,6\".\n"
"                              You can also use '-' to specify a range: \"1-5"
"\".\n"
"                              ',' and '-' can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."
msgstr ""

#: src/usage_text.h:240
msgid " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."
msgstr ""
" -T, --torrent-file=TORRENT_FILE  Le chemin complet du fichier .torrent."

#: src/usage_text.h:242
msgid ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""
" --follow-torrent=true|false|mem Si true ou mem est spécifié, quand un "
"fichier\n"
"                              dont le suffixe est .torrent ou dont le type\n"
"                              de contenu est application/x-bittorrent est "
"téléchargé, aria2 le\n"
"                              considère comme un fichier \"torrent\" et "
"télécharge les fichiers\n"
"                              mentionnés dedans.\n"
"                              Si mem est spécifié, le fichiertorrent n'est "
"pas\n"
"                              écrit sur le disque, mais est juste gardé en "
"mémoire.\n"
"                              Si false est spécifié, l'action mentionné ci-"
"dessus\n"
"                              n'est pas appliquée."

#: src/usage_text.h:252
msgid ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file."
msgstr ""

#: src/usage_text.h:255
msgid ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""
" --listen-port=PORT... Définit le nombre de port TCP pour les "
"téléchargements BitTorrent.\n"
"                              Plusieurs ports peuvent être spécifiés en "
"utilisant ',',\n"
"                              par exemple: \"6881,6885\". Vous pouvez aussi "
"utiliser '-'\n"
"                              pour spécifier une rangée: \"6881-6999\". ',' "
"et '-' peuvent\n"
"                              être utilisés ensemble."

#: src/usage_text.h:261
#, fuzzy
msgid ""
" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the upload speed per torrent, use\n"
"                              --max-upload-limit option."
msgstr ""
" --max-upload-limit=SPEED     Définir la vitesse maximale de téléchargement "
"en octets par sec.\n"
"                              0 signifie débridé.\n"
"                              Vous pouvez ajouter K ou M(1K = 1024, 1M = "
"1024K).\n"
"                              Défaut: 0"

#: src/usage_text.h:267
msgid ""
" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall upload speed, use\n"
"                              --max-overall-upload-limit option."
msgstr ""

#: src/usage_text.h:273
msgid ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."
msgstr ""
" --seed-time=MINUTES          Définir le temps de partage en minutes. "
"Consultez aussi\n"
"                              l'option --seed-ratio."

#: src/usage_text.h:276
msgid ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO.\n"
"                              You are strongly encouraged to specify equals "
"or\n"
"                              more than 1.0 here. Specify 0.0 if you intend "
"to\n"
"                              do seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."
msgstr ""

#: src/usage_text.h:285
msgid ""
" --peer-id-prefix=PEERI_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20\n"
"                              bytes are used. If less than 20 bytes are\n"
"                              specified, the random alphabet characters are\n"
"                              added to make it's length 20 bytes."
msgstr ""

#: src/usage_text.h:292
msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."
msgstr ""
" --enable-peer-exchange[=true|false] Active ou non le \"Peer Exchange"
"\" (PEX)."

#: src/usage_text.h:294
msgid " --enable-dht[=true|false]    Enable DHT functionality."
msgstr " --enable-dht[=true|false] Active ou non la fonctionnalité \"DHT\"."

#: src/usage_text.h:296
msgid ""
" --dht-listen-port=PORT...    Set UDP listening port for DHT.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""
" --dht-listen-port=PORT...    Configure le port d'écoute UDP pour le DHT.\n"
"                              De multiples port peuvent être spécifiés en "
"utilisant une\n"
"                              virgule (ex: \"6881,6885\". Vous pouvez aussi "
"utiliser  '-'\n"
"                              pour spécifier une rangée: \"6881-6999\". ',' "
"et '-' peuvent\n"
"                              être utilisée simultanément."

#: src/usage_text.h:302
msgid ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to DHT\n"
"                              network."
msgstr ""
" --dht-entry-point=HOST:PORT  Configure le host et le port comme un point  "
"d'entrée au réseau DHT."

#: src/usage_text.h:305
msgid ""
" --dht-file-path=PATH         Change the DHT routing table file to PATH."
msgstr ""
" --dht-file-path=PATH         Change le chemin d'accès du fichier \"DHT\"."

#: src/usage_text.h:307
msgid ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses the lowest one which "
"satisfies\n"
"                              the given level."
msgstr ""

#: src/usage_text.h:312
msgid ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."
msgstr ""
" --bt-require-crypto=true|false Si \"true\" est choisit, aria2 n'accepte\n"
"                              et n'établit pas de connexions non cryptées.\n"
"                              Sinon aria2 utilise toujours des connexions "
"cryptées."

#: src/usage_text.h:317
#, fuzzy
msgid ""
" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n"
"                              torrent is lower than SPEED, aria2 "
"temporarily\n"
"                              increases the number of peers to try for more\n"
"                              download speed. Configuring this option with "
"your\n"
"                              preferred download speed can increase your\n"
"                              download speed in some cases.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --bt-request-peer-speed-limit=SPEED Pour les téléchargements BitTorrent, si "
"la vitesse de\n"
"téléchargement est inférieure à SPEED, alors aria2 s'initialise et\n"
"accepte les connexions en ignorant les capacitées max. du peer\n"
"Vous pouvez ajouter K ou M(1K = 1024, 1M = 1024K)."

#: src/usage_text.h:325
msgid ""
" --bt-max-open-files=NUM      Specify maximum number of files to open in "
"each\n"
"                              BitTorrent download."
msgstr ""
" --bt-max-open-files=NUM      Specifies le nombre maximum de fichiers "
"ouverts pour\n"
"                              chaque téléchargement BitTorrent."

#: src/usage_text.h:328
msgid ""
" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"
"                              verifying piece hashes."
msgstr ""
" --bt-seed-unverified[=true|false] Partage (seed) les fichiers précédemment "
"téléchargés sans vérifier les \"hash\" des fichiers."

#: src/usage_text.h:331
#, fuzzy
msgid ""
" --bt-max-peers=NUM           Specify the maximum number of peers per "
"torrent.\n"
"                              0 means unlimited.\n"
"                              See also --bt-request-peer-speed-limit option."
msgstr ""
" -C, --metalink-servers=NUM_SERVERS Le nombre de serveurs auxquels se "
"connecter\n"
"                              simultanément.\n"
"                              Défaut: 5"

#: src/usage_text.h:335
msgid " -M, --metalink-file=METALINK_FILE The file path to the .metalink file."
msgstr ""
" -M, --metalink-file=METALINK_FILE Le chemin vers le fichier .metalink."

#: src/usage_text.h:337
msgid ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously. Some Metalinks regulate the\n"
"                              number of servers to connect. aria2 strictly\n"
"                              respects them. This means that if Metalink "
"defines\n"
"                              the maxconnections attribute lower than\n"
"                              NUM_SERVERS, then aria2 uses the value of\n"
"                              maxconnections attribute instead of "
"NUM_SERVERS.\n"
"                              See also -s and -j options."
msgstr ""

#: src/usage_text.h:346
msgid " --metalink-version=VERSION   The version of the file to download."
msgstr " --metalink-version=VERSION   La version du fichier à télécharger."

#: src/usage_text.h:348
msgid " --metalink-language=LANGUAGE The language of the file to download."
msgstr " --metalink-language=LANGUAGE La langua du fichier à télécharger."

#: src/usage_text.h:350
msgid ""
" --metalink-os=OS             The operating system of the file to download."
msgstr ""
" --metalink-os=OS             Le système d'exploitation auquel est destiné "
"le fichier."

#: src/usage_text.h:352
msgid ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-delimited list of locations is\n"
"                              acceptable."
msgstr ""

#: src/usage_text.h:356
msgid ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify "
"'none'\n"
"                              if you don't have any preferred protocol."
msgstr ""

#: src/usage_text.h:359
msgid ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metaink or content type of\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:369
msgid ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."
msgstr ""
" --metalink-enable-unique-protocol=true|false Si true est sélectionné et que "
"plusieurs\n"
"                              protocoles sont disponible pour un miroir dans "
"un fichier\n"
"                              metalink, aria2 utilise l'un d'eux.\n"
"                              Utilisez l'option --metalink-preferred-"
"protocol pour\n"
"                              spécifier les préférences du protocole."

#: src/usage_text.h:375
msgid " -v, --version                Print the version number and exit."
msgstr " -v, --version"

#: src/usage_text.h:377
msgid ""
" -h, --help[=CATEGORY]        Print usage and exit.\n"
"                              The help messages are classified in several\n"
"                              categories. For example, type \"--help=http\" "
"for\n"
"                              detailed explanation for the options related "
"to\n"
"                              http. If no matching category is found, "
"search\n"
"                              option name using a given word in middle "
"match\n"
"                              and print the result."
msgstr ""

#: src/usage_text.h:385
msgid " --no-conf                    Disable loading aria2.conf file."
msgstr " --no-conf Désactive le chargement du fichier aria2.conf ."

#: src/usage_text.h:387
msgid ""
" --conf-path=PATH             Change the configuration file path to PATH."
msgstr ""
" --conf-path=PATH Change l'emplacement du fichier de configuration vers PATH."

#: src/usage_text.h:389
msgid ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."
msgstr ""
" --stop=SEC                   Stoppe l'application après \"SEC\" seconde"
"(s).\n"
"                              Si la valeur est égale à 0 cette fonction est "
"inactive."

#: src/usage_text.h:392
msgid ""
" --header=HEADER              Append HEADER to HTTP request header. You can "
"use\n"
"                              this option repeatedly to specify more than "
"one\n"
"                              header:\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"
msgstr ""
" --header=HEADER              Ajoute l'en-tête \"HEADER\" à l'en-tête HTTP.\n"
"                             Vous pouvez utiliser cette option autant de "
"fois que \n"
"                              nécessaire en fonction de vos besoins.\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"

#: src/usage_text.h:398
msgid " -q, --quiet[=true|false]     Make aria2 quiet(no console output)."
msgstr ""

#: src/usage_text.h:400
msgid " --async-dns[=true|false]     Enable asynchronous DNS."
msgstr ""
" --async-dns[=true|false]     Active ou non la fonction \"asynchronous DNS"
"\" (\"requetes DNS en mode multithread\")."

#: src/usage_text.h:402
msgid " --ftp-reuse-connection[=true|false] Reuse connection in FTP."
msgstr " --ftp-reuse-connection[=true|false] Réutilise la connexion en FTP."

#: src/usage_text.h:404
msgid ""
" --summary-interval=SEC       Set interval to output download progress "
"summary.\n"
"                              Setting 0 suppresses the output."
msgstr ""
" --summary-interval=SEC       Configure l'intervalle d'affichage du résumé "
"régulier de la progression des téléchargements.\n"
"                              Mettre 0 pour ne pas l'afficher dans la "
"console."

#: src/usage_text.h:407
msgid " --log-level=LEVEL            Set log level to output."
msgstr ""
" --log-level=LEVEL            Configure le niveau de détail du fichier log "
"en sortie."

#: src/usage_text.h:409
msgid ""
" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from "
"the\n"
"                              remote HTTP/FTP server and if it is "
"available,\n"
"                              apply it to the local file."
msgstr ""
" -R, --remote-time[=true|false] Récupère en HTTP ou FTP la date et l'heure "
"du fichier distant\n"
"                                          et l'appliquer comme valeur par "
"défaut au fichier local."

#: src/usage_text.h:413
msgid ""
" --connect-timeout=SEC        Set the connect timeout in seconds to "
"establish\n"
"                              connection to HTTP/FTP/proxy server. After "
"the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --timeout option is used instead."
msgstr ""

#: src/usage_text.h:418
msgid ""
" --max-file-not-found=NUM     If aria2 receives `file not found' status from "
"the\n"
"                              remote HTTP/FTP servers NUM times without "
"getting\n"
"                              a single byte, then force the download to "
"fail.\n"
"                              Specify 0 to disable this option.\n"
"                              This options is effective only when using\n"
"                              HTTP/FTP servers."
msgstr ""

#: src/usage_text.h:425
msgid ""
" --uri-selector=SELECTOR      Specify URI selection algorithm.\n"
"                              If 'inorder' is given, URI is tried in the "
"order\n"
"                              appeared in the URI list.\n"
"                              If 'feedback' is given, aria2 uses download "
"speed\n"
"                              observed in the previous downloads and choose\n"
"                              fastest server in the URI list. This also\n"
"                              effectively skips dead mirrors. The observed\n"
"                              download speed is a part of performance "
"profile\n"
"                              of servers mentioned in --server-stat-of and\n"
"                              --server-stat-if options.\n"
"                              If 'adaptive' is given, selects one of the "
"best\n"
"                              mirrors for the first and reserved "
"connections.\n"
"                              For supplementary ones, it returns mirrors "
"which\n"
"                              has not been tested yet, and if each of them "
"has\n"
"                              already been tested, returns mirrors which has "
"to\n"
"                              be tested again. Otherwise, it doesn't select\n"
"                              anymore mirrors. Like 'feedback', it uses a\n"
"                              performance profile of servers."
msgstr ""

#: src/usage_text.h:444
msgid ""
" --server-stat-of=FILE        Specify the filename to which performance "
"profile\n"
"                              of the servers is saved. You can load saved "
"data\n"
"                              using --server-stat-if option."
msgstr ""

#: src/usage_text.h:448
msgid ""
" --server-stat-if=FILE        Specify the filename to load performance "
"profile\n"
"                              of the servers. The loaded data will be used "
"in\n"
"                              some URI selector such as 'feedback'.\n"
"                              See also --uri-selector option"
msgstr ""

#: src/usage_text.h:453
msgid ""
" --server-stat-timeout=SEC    Specifies timeout in seconds to invalidate\n"
"                              performance profile of the servers since the "
"last\n"
"                              contact to them."
msgstr ""

#: src/usage_text.h:457
msgid ""
" --auto-save-interval=SEC     Save a control file(*.aria2) every SEC "
"seconds.\n"
"                              If 0 is given, a control file is not saved "
"during\n"
"                              download. aria2 saves a control file when it "
"stops\n"
"                              regardless of the value."
msgstr ""

#: src/usage_text.h:462
msgid ""
" --certificate=FILE           Use the client certificate in FILE.\n"
"                              The certificate must be in PEM format.\n"
"                              You may use --private-key option to specify "
"the\n"
"                              private key."
msgstr ""

#: src/usage_text.h:467
msgid ""
" --private-key=FILE           Use the private key in FILE.\n"
"                              The private key must be decrypted and in PEM\n"
"                              format. See also --certificate option."
msgstr ""

#: src/usage_text.h:471
msgid ""
" --ca-certificate=FILE        Use the certificate authorities in FILE to "
"verify\n"
"                              the peers. The certificate file must be in "
"PEM\n"
"                              format and can contain multiple CA "
"certificates.\n"
"                              Use --check-certificate option to enable\n"
"                              verification."
msgstr ""

#: src/usage_text.h:477
msgid ""
" --check-certificate[=true|false] Verify the peer using certificates "
"specified\n"
"                              in --ca-certificate option."
msgstr ""

#: src/usage_text.h:480
msgid ""
" --no-proxy=DOMAINS           Specify comma separated hostnames or domains "
"where\n"
"                              proxy should not be used."
msgstr ""

#: src/usage_text.h:483
msgid ""
" --use-head[=true|false]      Use HEAD method for the first request to the "
"HTTP\n"
"                              server."
msgstr ""

#: src/usage_text.h:486
msgid " --event-poll=POLL            Specify the method for polling events."
msgstr ""

#: src/usage_text.h:488
#, fuzzy
msgid ""
" --xml-rpc-listen-port=PORT   Specify a port number for XML-RPC server to "
"listen\n"
"                              to."
msgstr ""
" --listen-port=PORT           Définir le numéro de port pour écouter dans le "
"cas d'une connexion P2P.\n"
"                              Default: 6881-6999"

#: src/usage_text.h:491
msgid ""
" --enable-xml-rpc[=true|false] Enable XML-RPC server.\n"
"                              It is strongly recommended to set username "
"and\n"
"                              password using --xml-rpc-user and --xml-rpc-"
"passwd\n"
"                              option. See also --xml-rpc-listen-port option."
msgstr ""

#: src/usage_text.h:496
msgid ""
" --xml-rpc-max-request-size=SIZE Set max size of XML-RPC request. If aria2\n"
"                              detects the request is more than SIZE bytes, "
"it\n"
"                              drops connection."
msgstr ""

#: src/usage_text.h:500
#, fuzzy
msgid " --xml-rpc-user=USER          Set XML-RPC user."
msgstr ""
" --ftp-user=USER              Indique le nom de l'utilisateur FTP.\n"
"                                             ATTENTION ! cela affecte toutes "
"les URLs !"

#: src/usage_text.h:502
#, fuzzy
msgid " --xml-rpc-passwd=PASSWD      Set XML-RPC password."
msgstr ""
" --ftp-passwd=PASSWD          Indique le mot de passe FTP de l'utilisateur.\n"
"                                             ATTENTION ! cela affecte toutes "
"les URLs !"

#: src/usage_text.h:504
#, fuzzy
msgid ""
" --bt-external-ip=IPADDRESS   Specify the external IP address to report to "
"a\n"
"                              BitTorrent tracker. Although this function is\n"
"                              named 'external', it can accept any kind of "
"IP\n"
"                              addresses."
msgstr ""
" --follow-metalink=true|false  Définir cette option comme false empêche à "
"aria2\n"
"                              d'entrer en mode Metalink même si le nom de "
"fichier\n"
"                              du fichier téléchargé se termine en ."
"metalink.\n"
"                              Défaut: true"

#: src/usage_text.h:509
#, fuzzy
msgid ""
" --http-auth-challenge[=true|false] Send HTTP authorization header only when "
"it\n"
"                              is requested by the server. If false is set, "
"then\n"
"                              authorization header is always sent to the "
"server.\n"
"                              There is an exception: if username and "
"password\n"
"                              are embedded in URI, authorization header is\n"
"                              always sent to the server regardless of this\n"
"                              option."
msgstr ""
" --check-integrity=true|false Vérifier l'intégrité en utilisant le hash.\n"
"                              Cette option affecte les téléchargements "
"BitTorrent\n"
"                              et Metalink en sommant les blocks de données.\n"
"                              Utilisez cette option pour retélécharger des "
"portions endommagées\n"
"                              d'un fichier.\n"
"                              Il se peut que vous deviez spécifier l'option "
"--allow-overwrite=true\n"
"                              si le fichier .aria2 n'existe pas.\n"
"                              Défaut: false"

#: src/usage_text.h:517
#, fuzzy
msgid ""
" -O, --index-out=INDEX=PATH   Set file path for file with index=INDEX. You "
"can\n"
"                              find the file index using the --show-files "
"option.\n"
"                              PATH is a relative path to the path specified "
"in\n"
"                              --dir option. You can use this option "
"multiple\n"
"                              times."
msgstr ""
" -s, --split=N                Télécharger un fichier en utilisant N "
"connexions. N doit être\n"
"                              entre 1 et 5. Cette option affecte tous les "
"URLs.\n"
"                              Ainsi, aria2 se connecte à chaque URL en "
"utilisant\n"
"                              N connexions.\n"
"                              Défaut: 1"

#: src/usage_text.h:523
#, fuzzy
msgid ""
" --dry-run[=true|false]       If true is given, aria2 just checks whether "
"the\n"
"                              remote file is available and doesn't download\n"
"                              data. This option has effect on HTTP/FTP "
"download.\n"
"                              BitTorrent downloads are canceled if true is\n"
"                              specified."
msgstr ""
" --metalink-enable-unique-protocol=true|false Si true est sélectionné et que "
"plusieurs\n"
"                              protocoles sont disponible pour un miroir dans "
"un fichier\n"
"                              metalink, aria2 utilise l'un d'eux.\n"
"                              Utilisez l'option --metalink-preferred-"
"protocol pour\n"
"                              spécifier les préférences du protocole."

#: src/usage_text.h:529
#, fuzzy
msgid ""
" --bt-tracker-interval=SEC    Set the interval in seconds between tracker\n"
"                              requests. This completely overrides interval "
"value\n"
"                              and aria2 just uses this value and ignores "
"the\n"
"                              min interval and interval value in the "
"response of\n"
"                              tracker. If 0 is set, aria2 determines "
"interval\n"
"                              based on the response of tracker and the "
"download\n"
"                              progress."
msgstr ""
" --check-integrity=true|false Vérifier l'intégrité en utilisant le hash.\n"
"                              Cette option affecte les téléchargements "
"BitTorrent\n"
"                              et Metalink en sommant les blocks de données.\n"
"                              Utilisez cette option pour retélécharger des "
"portions endommagées\n"
"                              d'un fichier.\n"
"                              Il se peut que vous deviez spécifier l'option "
"--allow-overwrite=true\n"
"                              si le fichier .aria2 n'existe pas.\n"
"                              Défaut: false"

#: src/usage_text.h:537
#, fuzzy
msgid ""
" --on-download-complete=COMMAND Set the command to be executed when "
"download\n"
"                              completes.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""
" --max-download-limit=SPEED   Définir la vitesse maximale de téléchargement "
"en octets par sec.\n"
"                              0 veut dire illimité.\n"
"                              Vous pouvez ajouter K ou M(1K = 1024, 1M = "
"1024K).\n"
"                              Défaut: 0"

#: src/usage_text.h:543
msgid ""
" --on-download-start=COMMAND  Set the command to be executed when download\n"
"                              starts up. COMMAND must take just one argument "
"and\n"
"                              GID is passed to COMMAND as a first argument."
msgstr ""

#: src/usage_text.h:547
#, fuzzy
msgid ""
" --on-download-error=COMMAND  Set the command to be executed when download\n"
"                              aborts due to error.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""
" --max-download-limit=SPEED   Définir la vitesse maximale de téléchargement "
"en octets par sec.\n"
"                              0 veut dire illimité.\n"
"                              Vous pouvez ajouter K ou M(1K = 1024, 1M = "
"1024K).\n"
"                              Défaut: 0"

#: src/usage_text.h:553
#, fuzzy
msgid ""
" --on-download-stop=COMMAND   Set the command to be executed when download\n"
"                              stops. You can override the command to be "
"executed\n"
"                              for particular download result using\n"
"                              --on-download-complete and --on-download-"
"error. If\n"
"                              they are specified, command specified in this\n"
"                              option is not executed.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""
" --follow-torrent=true|false|mem Si true ou mem est spécifié, quand un "
"fichier\n"
"                              dont le suffixe est .torrent ou dont le type\n"
"                              de contenu est application/x-bittorrent est "
"téléchargé, aria2 le\n"
"                              considère comme un fichier \"torrent\" et "
"télécharge les fichiers\n"
"                              mentionnés dedans.\n"
"                              Si mem est spécifié, le fichiertorrent n'est "
"pas\n"
"                              écrit sur le disque, mais est juste gardé en "
"mémoire.\n"
"                              Si false est spécifié, l'action mentionné ci-"
"dessus\n"
"                              n'est pas appliquée."

#: src/version_usage.cc:54
msgid " version "
msgstr " version "

#: src/version_usage.cc:71
#, c-format
msgid "Report bugs to %s"
msgstr "Faire part des bugs à %s"

#: src/version_usage.cc:76
#, c-format
msgid "Usage: %s [OPTIONS] [URL | TORRENT_FILE | METALINK_FILE]..."
msgstr "Usage: %s [OPTIONS] [URL | FICHIER_TORRENT |FICHIER_ METALINK]..."

#: src/version_usage.cc:86
#, c-format
msgid "Printing options whose name includes '%s'."
msgstr ""

#: src/version_usage.cc:89 src/version_usage.cc:111
msgid "Options:"
msgstr "Options:"

#: src/version_usage.cc:94
#, c-format
msgid "No help category or option name matching with '%s'."
msgstr "Aucune catégories d'aide ou de nom d'option correspondent pour '%s'."

#: src/version_usage.cc:100
msgid "Printing all options."
msgstr "Afficher toutes les options."

#: src/version_usage.cc:102
#, c-format
msgid "Printing options tagged with '%s'."
msgstr "Afficher toutes les options marquées avec '%s'."

#: src/version_usage.cc:106
#, c-format
msgid "See -h option to know other command-line options(%s)."
msgstr ""
"Regardez l'option -h pour connaître les autres options en ligne de commande(%"
"s)."

#: src/version_usage.cc:120
msgid ""
" You can specify multiple URLs. Unless you specify -Z option, all URLs must\n"
" point to the same file or downloading will fail."
msgstr ""
" Vous pouvez spécifier plusieurs URLs. A moins que vous ne spécifiez "
"l'option -Z, toutes les URLs doivent\n"
" faire référence au même fichier ou sinon le téléchargement échouera."

#: src/version_usage.cc:122
msgid ""
" You can also specify arbitrary number of torrent files and metalink files\n"
" stored in a local drive. Please note that they are always treated as a\n"
" separate download."
msgstr ""
" Vous pouvez spécifier un nombre infini de fichiers torrent ou metalink \n"
"Notez bien qu'ils seront toujours traités comme des téléchargements \n"
"séparés."

#: src/version_usage.cc:127
msgid ""
" You can specify both torrent file with -T option and URLs. By doing this,\n"
" download a file from both torrent swarm and http/ftp server at the same "
"time,\n"
" while the data from http/ftp are uploaded to the torrent swarm. Note that\n"
" only single file torrent can be integrated with http/ftp."
msgstr ""
" Vous pouvez spécifier ensemble un fichier torrent avec l'option -T et des "
"URLs. En faisant cela,\n"
" vous téléchargerez en même temps un fichier d'un essaim de torrent et d'un "
"serveur http/ftp,\n"
" pendant que les données provenant du http/ftp seront uploadé vers l'essaim "
"torrent. Notez que\n"
" seulement un seul fichier torrent peut être intégré avec http/ftp."

#: src/version_usage.cc:132
msgid ""
" Make sure that URL is quoted with single(') or double(\") quotation if it\n"
" contains \"&\" or any characters that have special meaning in shell."
msgstr ""
" Vérifiez que l'URL est quoté avec des guillemets simple (') ou double (\") "
"surtout si elle\n"
" contient \"&\" ou tout autre caractère ayant un sens dans le shell."

#: src/version_usage.cc:136
msgid "Refer to man page for more information."
msgstr "Merci de vous reférer au manuel pour plus d'information."

#: src/message.h:40
#, c-format
msgid "CUID#%d - The download for one segment completed successfully."
msgstr "CUID#%d - Le téléchargement d'un segment est complet."

#: src/message.h:41
#, c-format
msgid "CUID#%d - No segment available."
msgstr "CUID#%d - Pas de segment disponible."

#: src/message.h:42
#, c-format
msgid "CUID#%d - Connecting to %s:%d"
msgstr "CUID#%d - Connexion à %s:%d"

#: src/message.h:43
#, c-format
msgid ""
"CUID#%d - The segment changed. We send the request again with new Range "
"header."
msgstr ""
"CUID#%d - Le segment a changé. Nous envoyons une nouvelle requête sur l'en-"
"tête."

#: src/message.h:44
#, c-format
msgid "CUID#%d - Redirecting to %s"
msgstr "CUID#%d - Redirection vers %s"

#: src/message.h:45
#, c-format
msgid ""
"CUID#%d - Requesting:\n"
"%s"
msgstr ""
"CUID#%d - Demande:\n"
"%s"

#: src/message.h:46
#, c-format
msgid ""
"CUID#%d - Response received:\n"
"%s"
msgstr ""
"CUID#%d - Réponse reçue:\n"
"%s"

#: src/message.h:47
#, c-format
msgid "CUID#%d - Download aborted. URI=%s"
msgstr "CUID#%d - Téléchargement stoppé;. URI=%s"

#: src/message.h:48
#, c-format
msgid "CUID#%d - Restarting the download. URI=%s"
msgstr "CUID#%d - Redémarrage du téléchargement. URI=%s"

#: src/message.h:49
#, c-format
msgid "CUID#%d - Download aborted."
msgstr "CUID#%d - Téléchargement stoppé."

#: src/message.h:50
#, c-format
msgid "CUID#%d - %d times attempted, but no success. Download aborted."
msgstr "CUID#%d - %d tentatives sans succès. Téléchargement intérrompu."

#: src/message.h:51
#, c-format
msgid "CUID#%d - Unregistering cuid from segmentManager."
msgstr "CUID#%d - Suppression du CUID dans le gestionnaire de segment."

#: src/message.h:57
#, c-format
msgid "CUID#%d - we got new piece. index=%d"
msgstr "CUID#%d - Nous avons une nouvelle partie. index=%d"

#: src/message.h:58
#, c-format
msgid "CUID#%d - we got wrong piece. index=%d"
msgstr "CUID#%d - Nous avons une partie mauvaise. index=%d"

#: src/message.h:59
#, c-format
msgid "CUID#%d - Download not complete: %s"
msgstr "CUID#%d - Téléchargement incomplet: %s"

#: src/message.h:60
#, c-format
msgid "#%d - Download has already completed: %s"
msgstr "#%d - Ce téléchargement est déjà complet: %s"

#: src/message.h:61
#, c-format
msgid "CUID#%d - Good checksum: %s"
msgstr "CUID#%d - Somme de contrôle correcte: %s"

#: src/message.h:62
#, c-format
msgid "CUID#%d - Bad checksum: %s"
msgstr "CUID#%d - Somme de contrôle incorrecte: %s"

#: src/message.h:63
#, c-format
msgid "CUID#%d - Resolving hostname %s"
msgstr "CUID#%d - Résolution du nom de domaine %s"

#: src/message.h:64
#, c-format
msgid "CUID#%d - Name resolution complete: %s -> %s"
msgstr "CUID#%d - Résolution du nom complète: %s -> %s"

#: src/message.h:65
#, c-format
msgid "CUID#%d - Name resolution for %s failed:%s"
msgstr "CUID#%d - La résolution du nom pour %s a échoué:%s"

#: src/message.h:66
#, c-format
msgid "CUID#%d - DNS cache hit: %s -> %s"
msgstr "CUID#%d - Le cache DNS vous donne cette valeur: %s -> %s"

#: src/message.h:67
#, c-format
msgid "CUID#%d - Abort requested."
msgstr "CUID#%d - Arrêt demandé."

#: src/message.h:68
#, c-format
msgid "CUID#%d - Connecting to the peer %s"
msgstr "CUID#%d - Connexion au peer %s"

#: src/message.h:69
#, c-format
msgid ""
"CUID#%d - Piece received. index=%d, begin=%d, length=%d, offset=%llu, "
"blockIndex=%d"
msgstr ""
"CUID#%d - Pièce reçue. index=%d, commencement=%d, taille=%d, offset=%llu, "
"blockIndex=%d"

#: src/message.h:70
#, c-format
msgid "CUID#%d - Piece bitfield %s"
msgstr "CUID#%d - Piece bitfield %s"

#: src/message.h:71
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because the peer has been choked. "
"index=%d, begin=%d, length=%d"
msgstr ""
"CUID#%d - Rejet du message de la pièce dans la queue suite à une reception "
"d'un message d'annulation. index=%d, begin=%d, length=%d"

#: src/message.h:72
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because cancel message received. "
"index=%d, begin=%d, length=%d"
msgstr ""
"CUID#%d - Rejet du message de la pièce dans la queue suite à une reception "
"d'un message d'annulation. index=%d, begin=%d, length=%d"

#: src/message.h:73
#, c-format
msgid "CUID#%d - Exception caught while validating file integrity."
msgstr ""
"CUID#%d - \"Exception caught\" lors de la validation de l'intégrité du "
"fichier."

#: src/message.h:74
#, c-format
msgid "CUID#%d - Interested in the peer"
msgstr "CUID#%d - Intéréssé par le peer"

#: src/message.h:75
#, c-format
msgid "CUID#%d - Not interested in the peer"
msgstr "CUID#%d - Non intéréssé par le peer"

#: src/message.h:76
#, c-format
msgid "CUID#%d - Deleting request slot index=%d, blockIndex=%d"
msgstr "CUID#%d - Effacement de l'index de l'entrée demandée=%d, blockIndex=%d"

#: src/message.h:77
#, c-format
msgid ""
"CUID#%d - Deleting request slot index=%d, blockIndex=%d because localhost "
"got choked."
msgstr ""
"CUID#%d - Deleting request slot index=%d, blockIndex=%d because localhost "
"got choked"

#: src/message.h:78
#, c-format
msgid "CUID#%d - Deleting request slot blockIndex=%d because of time out"
msgstr ""
"CUID#%d - Effacement de l'entrée blockIndex=%d demandée suite à une "
"expiration du temps d'attente (\"timeout\")."

#: src/message.h:79
#, c-format
msgid ""
"CUID#%d - Deleting request slot blockIndex=%d because the block has been "
"acquired."
msgstr ""
"CUID#%d - Effacement de l'entrée blockIndex=%d demandée car le bloc a été "
"acquis."

#: src/message.h:80
#, c-format
msgid "CUID#%d - Fast extension enabled."
msgstr "CUID#%d - Extension rapide activée."

#: src/message.h:81
#, c-format
msgid "CUID#%d - Extended Messaging enabled."
msgstr "CUID#%d - Messagerie étendue activée."

#: src/message.h:82
#, c-format
msgid "CUID#%d - Exception caught while allocating file space."
msgstr ""
"CUID#%d - Erreur rencontrée lors de la création du fichier durant son "
"allocation"

#: src/message.h:83
#, c-format
msgid "CUID#%d - Content-Disposition detected. Use %s as filename"
msgstr ""
"CUID#%d - Content-Disposition détecté. Utilisation de %s comme nom de "
"fichier."

#: src/message.h:84
#, c-format
msgid "CUID#%d - Peer %s:%d banned."
msgstr "CUID#%d - le peer %s:%d est banni."

#: src/message.h:85
#, c-format
msgid "CUID#%d - Using port %d for accepting new connections"
msgstr "CUID#%d - Utilisation du port %d pour accepter de nouvellesconnexions"

#: src/message.h:86
#, c-format
msgid "CUID#%d - An error occurred while binding port=%d"
msgstr "CUID#%d - La jonction du port a engendré une erreur=%d"

#: src/message.h:87
#, c-format
msgid "CUID#%d - Incoming connection, adding new command CUID#%d"
msgstr ""
"CUID#%d - Connection entrante en cours, ajout de la nouvelle commande CUID#%d"

#: src/message.h:88
#, c-format
msgid "CUID#%d - Error in accepting connection"
msgstr "CUID#%d - Erreur lors de l'acceptation de la connection"

#: src/message.h:89
#, c-format
msgid "CUID#%d - Error occurred while processing tracker response."
msgstr ""
"CUID#%d - Une érreur s'est produite durant le traitement de la réponse du "
"tracker."

#: src/message.h:90
#, c-format
msgid "CUID#%d - Cannot create tracker request."
msgstr "CUID#%d - Impossible de créer la requête du tracker."

#: src/message.h:91
#, c-format
msgid "CUID#%d - Creating new tracker request command #%d"
msgstr "CUID#%d - Creating new tracker request command #%d"

#: src/message.h:92
#, c-format
msgid "CUID#%d - The peer is DHT-enabled."
msgstr "CUID#%d - Ce peer a activé le DHT."

#: src/message.h:94
#, c-format
msgid "Unrecognized URI or unsupported protocol: %s"
msgstr "URI non reconnue ou protocole non supporté: %s"

#: src/message.h:95
#, c-format
msgid "Tracker returned warning message: %s"
msgstr "Le tracker a retourné le méssage d'alerte suivant: %s"

#: src/message.h:96
#, c-format
msgid "The segment file %s exists."
msgstr "Le fichier segment %s existe."

#: src/message.h:97
#, c-format
msgid "The segment file %s does not exist."
msgstr "Le fichier segment %s n'existe pas."

#: src/message.h:98
#, c-format
msgid "Saving the segment file %s"
msgstr "Sauvegarde du fichier segment %s"

#: src/message.h:99
msgid "The segment file was saved successfully."
msgstr "Le fichier segment a été sauvegardé avec succès."

#: src/message.h:100
#, c-format
msgid "Loading the segment file %s."
msgstr "Chargement du fichier segment %s."

#: src/message.h:101
msgid "The segment file was loaded successfully."
msgstr "Le segment a été chargé avec succès."

#: src/message.h:102
msgid "No URI to download. Download aborted."
msgstr "Aucune URI à télécharger."

#: src/message.h:103
#, c-format
msgid ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."
msgstr ""
"Le fichier %s existe, mais un fichier de contrôle (*.aria2) n'existe pas. Le "
"télechargement a été annulé pour éviter que votre fichier ne soit tronqué à "
"0. Si vous êtes sûr de vouloir télécharger le fichier encore une fois, alors "
"éffacez-le ou ajoutez l'option --allow-overwrite=true puis redémarrez aria2."

#: src/message.h:104
#, c-format
msgid "Allocating file %s, %s bytes"
msgstr "Allocation du fichier %s, %s octets"

#: src/message.h:105
msgid "File not found"
msgstr "Fichier non trouvé"

#: src/message.h:106
msgid "Not a directory"
msgstr "Ce n'est pas un dossier"

#: src/message.h:107
#, c-format
msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d"
msgstr ""
"La taille de la somme de contôle est insuffisante. checksumLength=%d, "
"numChecksum=%d"

#: src/message.h:108
#, c-format
msgid "Writing file %s"
msgstr "En train d'écrire le fichier %s"

#: src/message.h:109
msgid "No peer list received."
msgstr "Aucune liste de peer reçcue."

#: src/message.h:110
#, c-format
msgid "Adding peer %s:%d"
msgstr "Ajout d'un peer %s: %d"

#: src/message.h:111
#, c-format
msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d"
msgstr "Effacement de la pièce index utilisée=%d, fillRate(%%)=%d<=%d"

#: src/message.h:112
msgid "Download of selected files was complete."
msgstr "Le téléchargement des fichiers sélectionnés est terminé."

#: src/message.h:113
msgid "The download was complete."
msgstr "Le téléchargement est terminé."

#: src/message.h:114
#, c-format
msgid "Removed %d have entries."
msgstr "Removed %d have entries."

#: src/message.h:115
#, c-format
msgid "Validating file %s"
msgstr "Validation du fichier %s"

#: src/message.h:116
#, c-format
msgid "%d seconds to allocate %s byte(s)"
msgstr "%d secondes pour allouer %s octet(s)"

#: src/message.h:117
#, c-format
msgid "Dispatching FileAllocationCommand for CUID#%d."
msgstr "Dispatching FileAllocationCommand for CUID#%d."

#: src/message.h:118
#, c-format
msgid "Metalink: Queueing %s for download."
msgstr "Metalink: place en file d'attente %s pour un téléchargement."

#: src/message.h:119
#, c-format
msgid "Download complete: %s"
msgstr "Téléchargement terminé: %s"

#: src/message.h:120
msgid "Seeding is over."
msgstr "Le partage (seeding) est terminé"

#: src/message.h:121
#, c-format
msgid "CUID#%d cancels segment index=%d. CUID#%d handles it instead."
msgstr "CUID#%d cancels segment index=%d. CUID#%d handles it instead."

#: src/message.h:122
msgid "No chunk to verify."
msgstr "No chunk to verify."

#: src/message.h:123
#, c-format
msgid "Good chunk checksum. hash=%s"
msgstr "Somme de contrôle du chunk OK. hash=%s"

#: src/message.h:124
#, c-format
msgid "Failed to load cookies from %s"
msgstr "Impossible d'ouvrir les cookies depuis %s"

#: src/message.h:125
#, c-format
msgid ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."
msgstr ""
"le fichier .netrc %s n'a pas les bonnes permissions. Il devrait être 600. "
"Lesupport de ce fichier n'est donc pas pris en compte."

#: src/message.h:126
msgid "Logging started."
msgstr "Identification commencée."

#: src/message.h:127
msgid "Specify at least one URL."
msgstr "Spécifiez au moins une URL."

#: src/message.h:128
msgid "daemon failed."
msgstr "Le service a échoué."

#: src/message.h:129
#, c-format
msgid "Verification finished successfully. file=%s"
msgstr "La vérification s'est bien passée. fichier=%s"

#: src/message.h:130
#, c-format
msgid "Checksum error detected. file=%s"
msgstr "Erreur d'intégrité détectée. fichier=%s"

#: src/message.h:131
#, c-format
msgid "Incomplete range specified. %s"
msgstr "Rangée spécifiée incomplete. %s"

#: src/message.h:132
#, c-format
msgid "Failed to convert string into value: %s"
msgstr "Erreur lors de la conversion de la chaîne en valeur: %s"

#: src/message.h:133
msgid "Resource not found"
msgstr "Ressource introuvable"

#: src/message.h:134
#, c-format
msgid "File already exists. Renamed to %s."
msgstr "Le fichier existe déjà. Renommé en %s"

#: src/message.h:135
msgid "Cannot parse metalink XML file. XML may be malformed."
msgstr ""
"Impossible de réaliser l'analyse syntaxique du fichier metalink XML. Ce "
"dernier peut avoir été mal formé."

#: src/message.h:136
#, c-format
msgid "Too small payload size for %s, size=%d."
msgstr ""
"Taille de la charge utile (\"payload\") trop petite pour %s, taille=%d."

#: src/message.h:137
#, c-format
msgid ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."
msgstr ""
"Le fichier de contrôle défectueux %s a été supprimé car le fichier "
"téléchargé %s n'existe pas."

#: src/message.h:138
#, c-format
msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"
msgstr "Votre ratio de partage était de %.1f, envoyé/téléchargé=%sB/%sB"

#: src/message.h:139
#, c-format
msgid "Missing %s in torrent metainfo."
msgstr "%s manquant dans le metainfo du torrent."

#: src/message.h:140
msgid "Tracker returned null data."
msgstr "Le tracker n'a retourné aucune donnée."

#: src/message.h:141
msgid "Windows socket library initialization failed"
msgstr "L'initialisation de la librairie socket Windows a échoué."

#: src/message.h:142
#, c-format
msgid "%d second(s) has passed. Stopping application."
msgstr "%d seconde(s) sont passée(s). Arrêt de l'applicatiion"

#: src/message.h:143
#, c-format
msgid ""
"Saved signature as %s. Please note that aria2 doesn't verify signatures."
msgstr ""
"Signature sauvegardée en tant que %s. Merci de noter que aria2 ne vérifie "
"pas les signatures."

#: src/message.h:145
#, c-format
msgid "Saving signature as %s failed. Maybe file already exists."
msgstr ""
"La sauvegarde de la signature en tant que %s a echouée. Peut-être que le "
"fichier existe déjà ?"

#: src/message.h:148
#, c-format
msgid "Failed to open ServerStat file %s for read."
msgstr "Impossible d'ouvrir le fichier ServerStat %s en lecture."

#: src/message.h:149
#, c-format
msgid "ServerStat file %s loaded successfully."
msgstr "Le fichier ServerStat %s a été chargé correctement."

#: src/message.h:150
#, c-format
msgid "Failed to read ServerStat from %s."
msgstr "Impossible de lire le fichier ServerStat depuis %s."

#: src/message.h:153
#, c-format
msgid "Failed to open ServerStat file %s for write."
msgstr "Impossible d'écrire le fichier %s"

#: src/message.h:154
#, c-format
msgid "ServerStat file %s saved successfully."
msgstr "Le fichier ServerStat %s a été correctement chargée."

#: src/message.h:155
#, c-format
msgid "Failed to write ServerStat to %s."
msgstr "Impossible d'écrire le fichier ServerStat vers %s."

#: src/message.h:158
#, c-format
msgid "Failed to establish connection, cause: %s"
msgstr "Impossible d'établir une connexion, la cause est: %s"

#: src/message.h:159
#, c-format
msgid "Network problem has occurred. cause:%s"
msgstr "Un problème réseau a été detecté. La cause est: %s"

#: src/message.h:161
#, c-format
msgid "Failed to load trusted CA certificates from %s. Cause: %s"
msgstr ""

#: src/message.h:163
#, c-format
msgid "Certificate verification failed. Cause: %s"
msgstr ""

#: src/message.h:164
msgid "No certificate found."
msgstr ""

#: src/message.h:165
msgid "Hostname not match."
msgstr ""

#: src/message.h:166
msgid "No files to download."
msgstr ""

#: src/message.h:168
msgid ""
"You may encounter the certificate verification error with HTTPS server. See "
"--ca-certificate and --check-certificate option."
msgstr ""

#: src/message.h:170
#, fuzzy, c-format
msgid "Printing the contents of file '%s'..."
msgstr "Afficher toutes les options marquées avec '%s'."

#: src/message.h:171
msgid "This file is neither Torrent nor Metalink file. Skipping."
msgstr ""

#: src/message.h:176
msgid "Timeout."
msgstr "Temps d'attente dépassé (timeout)"

#: src/message.h:177
msgid "Invalid chunk size."
msgstr "Taille de block invalide"

#: src/message.h:178
#, c-format
msgid "Too large chunk. size=%d"
msgstr "Bloc trop grand. taille=%d"

#: src/message.h:179
msgid "Invalid header."
msgstr "En-tête invalide"

#: src/message.h:180
msgid "Invalid response."
msgstr "Réponse invalide"

#: src/message.h:181
msgid "No header found."
msgstr "Aucun en-tête trouvé"

#: src/message.h:182
msgid "No status header."
msgstr "Aucun en-tête de status."

#: src/message.h:183
msgid "Proxy connection failed."
msgstr "La connexion proxy a échoué."

#: src/message.h:184
msgid "Connection failed."
msgstr "La connexion a échoué."

#: src/message.h:185
#, c-format
msgid ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"
msgstr ""
"Le fichié demandé et celui enregistré précédemment sont différents. Taille "
"du fichier attendue: %s En réalité: %s"

#: src/message.h:186
#, c-format
msgid "The response status is not successful. status=%d"
msgstr "La réponse a échoué. Status=%d"

#: src/message.h:187
#, c-format
msgid "Too large file size. size=%s"
msgstr "Fichier trop grand. Taille=%s"

#: src/message.h:188
#, c-format
msgid "Transfer encoding %s is not supported."
msgstr "Le type de transfert %s n'est pas supporté."

#: src/message.h:189
#, c-format
msgid "SSL initialization failed: %s"
msgstr "L'initialisation SSL a échouée: %s"

#: src/message.h:190
msgid "SSL I/O error"
msgstr "Erreur E/S SSL"

#: src/message.h:191
msgid "SSL protocol error"
msgstr "erreur de protocole SSL"

#: src/message.h:192
#, c-format
msgid "SSL unknown error %d"
msgstr "érreur SSL inconnue %d"

#: src/message.h:193
#, c-format
msgid "SSL initialization failed: OpenSSL connect error %d"
msgstr "L'initialisation SSL a échouée: érreur de connexion OpenSSL SSL %d"

#: src/message.h:194
#, c-format
msgid "Size mismatch Expected:%s Actual:%s"
msgstr "La taille ne coïncide pas. Attendue: %s En réalité: %s"

#: src/message.h:195
msgid "Authorization failed."
msgstr "L'autorisation a échoué."

#: src/message.h:196
msgid "Got EOF from the server."
msgstr "Obtenir la fin du fichier (EOF) du serveur."

#: src/message.h:197
msgid "Got EOF from peer."
msgstr "Obtenir la fin du fichier (EOF) du partenaire."

#: src/message.h:198
msgid "Malformed meta info."
msgstr "Métainfos malformées."

#: src/message.h:200
#, c-format
msgid "Failed to open the file %s, cause: %s"
msgstr "Impossible d'ouvrir le fichier %s, cause: %s"

#: src/message.h:201
#, c-format
msgid "Failed to write into the file %s, cause: %s"
msgstr "Impossible d'écrire le fichier %s, cause: %s"

#: src/message.h:202
#, c-format
msgid "Failed to read from the file %s, cause: %s"
msgstr "Impossible de lire le fichier %s, cause: %s"

#: src/message.h:203
msgid "Failed to read data from disk."
msgstr "Impossible de lire les données depuis le disque."

#: src/message.h:204
#, c-format
msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"
msgstr ""
"Impossible de calculer la somme SHA1 du ou d'une partie du fichier %s, "
"cause: %s"

#: src/message.h:205
#, c-format
msgid "Failed to seek the file %s, cause: %s"
msgstr "Impossible de chercher le fichier %s, cause: %s"

#: src/message.h:206
#, c-format
msgid "The offset is out of range, offset=%s"
msgstr "Le décalage est trop grand, décalage=%s"

#: src/message.h:207
#, c-format
msgid "%s is not a directory."
msgstr "%s n'est pas un dossier"

#: src/message.h:208
#, c-format
msgid "Failed to make the directory %s, cause: %s"
msgstr "Impossible de créer le dossier %s, cause: %s"

#: src/message.h:209
#, c-format
msgid "Failed to open the segment file %s, cause: %s"
msgstr "Impossible d'ouvrir le fichier de segment %s, cause: %s"

#: src/message.h:210
#, c-format
msgid "Failed to write into the segment file %s, cause: %s"
msgstr "Impossible d'écrire dans le fichier de segment %s, cause: %s"

#: src/message.h:211
#, c-format
msgid "Failed to read from the segment file %s, cause: %s"
msgstr "Impossible de lire à partir du fichier de segment %s, cause: %s"

#: src/message.h:213
#, c-format
msgid "Failed to open a socket, cause: %s"
msgstr "Impossible d'ouvrir une connexion socket, cause: %s"

#: src/message.h:214
#, c-format
msgid "Failed to set a socket option, cause: %s"
msgstr "Impossible de définir une option de connexion socket, cause: %s"

#: src/message.h:215
#, c-format
msgid "Failed to set a socket as blocking, cause: %s"
msgstr "Failed to set a socket as blocking, cause: %s"

#: src/message.h:216
#, c-format
msgid "Failed to set a socket as non-blocking, cause: %s"
msgstr "Failed to set a socket as non-blocking, cause: %s"

#: src/message.h:217
#, c-format
msgid "Failed to bind a socket, cause: %s"
msgstr "Impossible d'unir une connexion socket, cause: %s"

#: src/message.h:218
#, c-format
msgid "Failed to listen to a socket, cause: %s"
msgstr "Impossible d'écouter une connexion socket, cause: %s"

#: src/message.h:219
#, c-format
msgid "Failed to accept a peer connection, cause: %s"
msgstr "Impossible d'accepter une connexion à un autre ordinateur, cause: %s"

#: src/message.h:220
#, c-format
msgid "Failed to get the name of socket, cause: %s"
msgstr "Impossible de récupérer le nom de la connexion socket, cause: %s"

#: src/message.h:221
#, c-format
msgid "Failed to get the name of connected peer, cause: %s"
msgstr "Impossible d'obtenir le nom de l'autre ordinateur, cause: %s"

#: src/message.h:222
#, c-format
msgid "Failed to resolve the hostname %s, cause: %s"
msgstr "Impossible de récupérer le nom de l'hôte %s, cause: %s"

#: src/message.h:223
#, c-format
msgid "Failed to connect to the host %s, cause: %s"
msgstr "Impossible de se connecter à l'hôte %s, cause: %s"

#: src/message.h:224
#, c-format
msgid "Failed to check whether the socket is writable, cause: %s"
msgstr ""
"Impossible de vérifier si la connexion socket est inscriptible, cause: %s"

#: src/message.h:225
#, c-format
msgid "Failed to check whether the socket is readable, cause: %s"
msgstr "Impossible de vérifier si la connexion socket est lisible, cause: %s"

#: src/message.h:226
#, c-format
msgid "Failed to send data, cause: %s"
msgstr "Impossible d'envoyer les données, cause: %s"

#: src/message.h:227
#, c-format
msgid "Failed to receive data, cause: %s"
msgstr "Impossible de recevoir les données, cause: %s"

#: src/message.h:228
#, c-format
msgid "Failed to peek data, cause: %s"
msgstr "Impossible de lire les données, cause: %s"

#: src/message.h:229
#, c-format
msgid "Unknown socket error %d (0x%x)"
msgstr "Erreur de socket inconnue %d (0x%x)"

#: src/message.h:230
#, c-format
msgid "File %s exists, but %s does not exist."
msgstr "Le fichier %s existe, mais %s n'existe pas"

#: src/message.h:231
#, c-format
msgid "Invalid payload size for %s, size=%d. It should be %d."
msgstr "Taille du fichier %s invalide, taille=%d. Il devrait faire %d."

#: src/message.h:232
#, c-format
msgid "Invalid ID=%d for %s. It should be %d."
msgstr "ID invalide=%d pour %s. Ça devrait être %d."

#: src/message.h:233
#, c-format
msgid ""
"Chunk checksum validation failed. checksumIndex=%d, offset=%s, expectedHash=%"
"s, actualHash=%s"
msgstr ""
"La validation du bloc a échoué. Hash=%d, décalage=%s, Hash attendu=%s, Hash ="
"%s"

#: src/message.h:234
msgid "Download aborted."
msgstr "Téléchargement interrompu."

#: src/message.h:235
#, c-format
msgid "File %s is being downloaded by other command."
msgstr ""
"Le fichier %s est déjà en train d'être téléchargé par une autre commande."

#: src/message.h:236
msgid "Insufficient checksums."
msgstr "Somme de vérification insuffisante."

#: src/message.h:237
#, c-format
msgid "Tracker returned failure reason: %s"
msgstr "Le Tracker a retourné le message d'alerte suivant: %s"

#: src/message.h:238
msgid "Flooding detected."
msgstr ""
"Réception d'une quantité anormalement élevée de données (\"flood\") détectée."

#: src/message.h:239
#, c-format
msgid ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%d seconds)."
msgstr ""
"Coupure de connexion demandée car aucune pièce ou message n'ont été "
"échangées pendant un certain temps (%d secondes)."

#: src/message.h:240
msgid "The infoHash in torrent file doesn't match to one in .aria2 file."
msgstr ""
"Les informations du hash contenu dans le fichier torrent ne correspondent "
"pas à celles du fichier .aria2 ."

#: src/message.h:241
#, c-format
msgid "No such file entry %s"
msgstr "Aucune entrée de ce type %s"

#: src/message.h:242
#, c-format
msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s"
msgstr "La vitesse de téléchargement est trop lente: %d <= %d(B/s), hôte:%s"

#: src/message.h:243
msgid "No HttpRequestEntry found."
msgstr "Aucune en-tête trouvée."

#: src/message.h:244
#, c-format
msgid "Got %d status, but no location header provided."
msgstr "Obtention du status %d, mais aucune en-tête de location proposée."

#: src/message.h:245
#, c-format
msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"
msgstr "Champ de l'en-tête invalide. Requête: %s-%s/%s, Réponse: %s-%s/%s"

#: src/message.h:246
msgid "No file matched with your preference."
msgstr "Aucun fichier ne correspond à votre préférence"

#: src/message.h:247
msgid "Exception caught"
msgstr "Exception détectée"

#: src/message.h:248
#, c-format
msgid "Max payload length exceeded or invalid. length = %u"
msgstr ""
"La longueur maximale du \"payload\" est excédentaire ou invalide. Longueur = "
"%u"

#: src/message.h:249
#, c-format
msgid "Invalid file length. Cannot continue download %s: local %s, remote %s"
msgstr ""
"Taille de fichier invalide. Ne peut continuer le téléchargement %s: local %"
"s, distant %s"

#: src/BtSetup.cc:160
msgid "Errors occurred while binding port.\n"
msgstr "La jonction du port a engendré des erreurs.\n"

#: src/Util.cc:714
msgid "Files:"
msgstr "Fichiers:"

#~ msgid ""
#~ " --max-download-limit=SPEED   Set max download speed in bytes per sec.\n"
#~ "                              0 means unrestricted.\n"
#~ "                              You can append K or M(1K = 1024, 1M = "
#~ "1024K)."
#~ msgstr ""
#~ " --max-download-limit=SPEED   Permet de régler la vitesse maximale de "
#~ "téléchargement\n"
#~ "                                                           en octets par "
#~ "seconde. 0 signifiant illimité. Vous pouvez ajouter\n"
#~ "                                                          K ou M (1K = "
#~ "1024, 1M = 1024K)."

#~ msgid ""
#~ "File %s exists, but %s does not exist. The download was canceled in order "
#~ "to prevent your file from being truncated to 0. If you are sure to "
#~ "download file all over again, then delete it or add --allow-"
#~ "overwrite=true option and restart aria2."
#~ msgstr ""
#~ "Le fichier %s existe mais %s n'existe pas. Le téléchargement a été annulé "
#~ "pour empêcher que votre fichier ne soit écrasé. Si vous voulez "
#~ "retélécharger le fichier, supprimez-le ou ajouter l'option --allow-"
#~ "overwrite=true et redémarrez aria2"

#~ msgid ""
#~ "This program is free software; you can redistribute it and/or modify\n"
#~ "it under the terms of the GNU General Public License as published by\n"
#~ "the Free Software Foundation; either version 2 of the License, or\n"
#~ "(at your option) any later version.\n"
#~ "\n"
#~ "This program is distributed in the hope that it will be useful,\n"
#~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
#~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
#~ "GNU General Public License for more details.\n"
#~ "\n"
#~ "You should have received a copy of the GNU General Public License\n"
#~ "along with this program; if not, write to the Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-"
#~ "1301  USA\n"
#~ msgstr ""
#~ "Ce programme est un logiciel libre et gratuit; vous pouvez le "
#~ "redistribuer et/ou le modifier\n"
#~ "selon les termes de la Licence Publique Générale GNU telle qu'elle est "
#~ "publiée par la Free Software Foundation; soit la version 2 de la License, "
#~ "ou \n"
#~ "(comme vous le souhaitez) n'importe quelle nouvelle version.\n"
#~ "[\n"
#~ "Ce programme est distribué en espérant être utile,\n"
#~ "mais SANS AUCUNE GARANTIE que ce soit; ni même la garantie implicite de\n"
#~ "VENTE ou CORRESPONDANCE DANS UN BUT PARTICULIER. Consultez la\n"
#~ "Licence Publique Générale GNU pour plus d'informations.\n"
#~ "\n"
#~ "Vous devez avoir une copie de la  Licence Publique Générale GNU\n"
#~ "avec ce programme; sinon écrivez à la Free Software\n"
#~ "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-"
#~ "1301  USA\n"

#~ msgid "Contact Info:"
#~ msgstr "Informations de Contact:"

#~ msgid "Usage: %s [options] URL ...\n"
#~ msgstr "Utilisation: %s [options] URL ...\n"

#~ msgid "       %s [options] -M METALINK_FILE\n"
#~ msgstr "       %s [options] -M FICHIER_METALINK\n"

#~ msgid ""
#~ " --retry-wait=SEC             Set the seconds to wait to retry after an "
#~ "error\n"
#~ "                              has occured. Specify a value between 0 and "
#~ "60.\n"
#~ "                              Default: 5"
#~ msgstr ""
#~ " --retry-wait=SEC             Définit le temps entre chaque requête\n"
#~ "                              pour les erreurs. Spécifiez une valeur "
#~ "entre 0 et 60.\n"
#~ "                              Défaut: 5"

#~ msgid " -t, --timeout=SEC            Set timeout in seconds. Default: 60"
#~ msgstr ""
#~ " -t, --timeout=SEC            Définir le délai d'expiration en secondes. "
#~ "Défaut: 60"

#~ msgid ""
#~ " -m, --max-tries=N            Set number of tries. 0 means unlimited.\n"
#~ "                              Default: 5"
#~ msgstr ""
#~ " -m, --max-tries=N            Définir le nombre d'essais. 0 veut dire "
#~ "illimité.\n"
#~ "                              Défaut: 5"

#~ msgid ""
#~ " --http-proxy=HOST:PORT       Use HTTP proxy server. This affects all "
#~ "URLs."
#~ msgstr ""
#~ " --http-proxy=HOST:PORT       Utiliser un serveur proxy HTTP. Ceci "
#~ "affecte tous\n"
#~ "                              les URLs."

#~ msgid ""
#~ " --http-proxy-user=USER       Set HTTP proxy user. This affects all URLs."
#~ msgstr ""
#~ " --http-proxy-user=USER       Définir un utilisateur proxy HTTP. Ceci "
#~ "affecte tous les URLs"

#~ msgid ""
#~ " --http-proxy-passwd=PASSWD   Set HTTP proxy password. This affects all "
#~ "URLs."
#~ msgstr ""
#~ " --http-proxy-passwd=PASSWD   Définir un mot de passe HTTP. Ceci affecte "
#~ "tous les URLs."

#~ msgid ""
#~ " --http-proxy-method=METHOD   Set the method to use in proxy request.\n"
#~ "                              METHOD is either 'get' or 'tunnel'.\n"
#~ "                              Default: tunnel"
#~ msgstr ""
#~ " --http-proxy-method=METHOD   Définir la méthode à utiliser lors de "
#~ "requêtes proxy.\n"
#~ "                              METHOD est soit 'get' ou 'tunnel'.\n"
#~ "                              Défaut: tunnel"

#~ msgid ""
#~ " --http-auth-scheme=SCHEME    Set HTTP authentication scheme. Currently, "
#~ "basic\n"
#~ "                              is the only supported scheme.\n"
#~ "                              Default: basic"
#~ msgstr ""
#~ " --http-auth-scheme=SCHEME    Définir un type d'identification HTTP. En "
#~ "ce moment, basic\n"
#~ "                              est le seul type d'identification "
#~ "supporté.\n"
#~ "                              Défaut: basic"

#~ msgid ""
#~ " --ftp-user=USER              Set FTP user. This affects all URLs.\n"
#~ "                              Default: anonymous"
#~ msgstr ""
#~ " --ftp-user=USER              Définir l'utilisateur FTP. Ceci affecte "
#~ "tous les URLs.\n"
#~ "                              Défaut: anonymous"

#~ msgid ""
#~ " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs.\n"
#~ "                              Default: ARIA2USER@"
#~ msgstr ""
#~ " --ftp-passwd=PASSWD          Définir un mot de passe FTP. Ceci affecte "
#~ "tous les URLs.\n"
#~ "                              Default: ARIA2USER@"

#~ msgid ""
#~ " --ftp-type=TYPE              Set FTP transfer type. TYPE is either "
#~ "'binary'\n"
#~ "                              or 'ascii'.\n"
#~ "                              Default: binary"
#~ msgstr ""
#~ " --ftp-type=TYPE              Définir un type de transfert FTP. TYPE est "
#~ "soit 'binary'\n"
#~ "                              ou 'ascii'.\n"
#~ "                              Défaut: binary"

#~ msgid " -p, --ftp-pasv               Use passive mode in FTP."
#~ msgstr " -p, --ftp-pasv               Utiliser le mode passif de FTP."

#~ msgid ""
#~ " --ftp-via-http-proxy=METHOD  Use HTTP proxy in FTP. METHOD is either "
#~ "'get' or\n"
#~ "                              'tunnel'.\n"
#~ "                              Default: tunnel"
#~ msgstr ""
#~ " --ftp-via-http-proxy=METHOD  Utiliser un proxy HTTP en FTP. METHOD est "
#~ "soit 'get' ou\n"
#~ "                              'tunnel'.\n"
#~ "                              Défaut: tunnel"

#~ msgid ""
#~ " --lowest-speed-limit=SPEED   Close connection if download speed is lower "
#~ "than\n"
#~ "                              or equal to this value(bytes per sec).\n"
#~ "                              0 means aria2 does not have a lowest speed "
#~ "limit.\n"
#~ "                              You can append K or M(1K = 1024, 1M = "
#~ "1024K).\n"
#~ "                              This option does not affect BitTorrent "
#~ "downloads.\n"
#~ "                              Default: 0"
#~ msgstr ""
#~ " --lowest-speed-limit=SPEED   Fermer la connexiion si la vitesse de "
#~ "téléchargement est inférieure à \n"
#~ "                              ou égal à cette valeur(octets par sec).\n"
#~ "                              0 veut dire que aria2 n'a pas de vitesse "
#~ "minimale.\n"
#~ "                              Vous pouvez ajouter K ou M(1K = 1024, 1M = "
#~ "1024K).\n"
#~ "                              Cette option n'affecte pas le "
#~ "téléchargement BitTorrent .\n"
#~ "                              Default: 0"

#~ msgid ""
#~ " -i, --input-file=FILE        Downloads URIs found in FILE. You can "
#~ "specify\n"
#~ "                              multiple URIs for a single entity: "
#~ "separate\n"
#~ "                              URIs on a single line using the TAB "
#~ "character.\n"
#~ "                              Reads input from stdin when '-' is "
#~ "specified."
#~ msgstr ""
#~ " -i, --input-file=FILE        Télécharger les URIs se trouvant dans FILE. "
#~ "Vous pouvez spécifier\n"
#~ "                              plusieurs URIs pour une seule entité: "
#~ "délimitez les\n"
#~ "                              URIs par des tabulations sur une seule "
#~ "ligne.\n"
#~ "                              Lit la sortie de stdin quand '-' est "
#~ "spécifié."

#~ msgid ""
#~ " -j, --max-concurrent-downloads=N Set maximum number of concurrent "
#~ "downloads.\n"
#~ "                              It should be used with the -i option.\n"
#~ "                              Default: 5"
#~ msgstr ""
#~ " -j, --max-concurrent-downloads=N Définit le nombre maximum de "
#~ "téléchargements simultanés.\n"
#~ "                              Doit être utilisé avec l'option -i.\n"
#~ "                              Défaut: 5"

#~ msgid ""
#~ " --load-cookies=FILE          Load cookies from FILE. The format of FILE "
#~ "is\n"
#~ "                              the same used by Netscape and Mozilla."
#~ msgstr ""
#~ " --load-cookies=FILE          Charge les cookies de FILE. Le format de "
#~ "FILE est\n"
#~ "                              celui utilisé par Netscape et Mozilla."

#~ msgid ""
#~ " -S, --show-files             Print file listing of .torrent or .metalink "
#~ "file\n"
#~ "                              and exit."
#~ msgstr ""
#~ " -S, --show-files             Imprime la liste des fichiers .torrent ou ."
#~ "metalink\n"
#~ "                              et quitte."

#~ msgid ""
#~ " --select-file=INDEX...       Set file to download by specifing its "
#~ "index.\n"
#~ "                              You can find the file index using the\n"
#~ "                              --show-files option. Multiple indexes can "
#~ "be\n"
#~ "                              specified by using ',', for example: \"3,6"
#~ "\".\n"
#~ "                              You can also use '-' to specify a range: "
#~ "\"1-5\".\n"
#~ "                              ',' and '-' can be used together.\n"
#~ "                              When used with the -M option, index may "
#~ "vary\n"
#~ "                              depending on the query(see --metalink-* "
#~ "options)."
#~ msgstr ""
#~ " --select-file=INDEX...       Définit le téléchargement en spécifiant son "
#~ "index.\n"
#~ "                              Vous pouvez savoir l'index du fichier grace "
#~ "à l'option --show-files.\n"
#~ "                              Vou pouvez spécifier plusieurs index en "
#~ "utilisant\n"
#~ "                              ',' comme \"3,6\".\n"
#~ "                              Vous pouvez aussi utiliser '-' pour "
#~ "spécifier un intervalle \"1-5\".\n"
#~ "                              ',' et '-' peuvent être utilisés ensemble.\n"
#~ "                              Quand vous utilisez l'option -M, l'index "
#~ "peut varier selon\n"
#~ "                              la requête (consultez l'option --metalink-"
#~ "*)."

#~ msgid ""
#~ " --follow-torrent=true|false  Set to false to prevent aria2 from\n"
#~ "                              entering BitTorrent mode even if the "
#~ "filename of\n"
#~ "                              the downloaded file ends with .torrent.\n"
#~ "                              Default: true"
#~ msgstr ""
#~ " --follow-torrent=true|false  Définir cette option comme false empêche à  "
#~ "aria2\n"
#~ "                              d'entrer en mode BitTorrent même si le nom "
#~ "du fichier\n"
#~ "                              téléchargé termine pas l'extension ."
#~ "torrent.\n"
#~ "                              Défaut: true"

#~ msgid ""
#~ " --direct-file-mapping=true|false Directly read from and write to each "
#~ "file\n"
#~ "                              mentioned in .torrent file.\n"
#~ "                              Default: true"
#~ msgstr ""
#~ " --direct-file-mapping=true|false Lire directement à partir de et écrit "
#~ "sur chaque fichier\n"
#~ "                              mentioné dans le fichier .torrent.\n"
#~ "                              Défaut: true"

#~ msgid ""
#~ " --seed-ratio=RATIO           Specify share ratio. Seed completed "
#~ "torrents\n"
#~ "                              until share ratio reaches RATIO. 1.0 is\n"
#~ "                              encouraged. If --seed-time option is "
#~ "specified\n"
#~ "                              along with this option, seeding ends when "
#~ "at\n"
#~ "                              least one of the conditions is satisfied."
#~ msgstr ""
#~ " --seed-ratio=RATIO           Définir le ratio de partage. Partager les "
#~ "torrents téléchargés jusqu'à\n"
#~ "                              ce que le ratio de partage atteigne RATIO. "
#~ "1.0 est recommandé.\n"
#~ "                              Si l'option --seed-time est spécifiée avec "
#~ "cette option,\n"
#~ "                              le partage s'arrête dès qu'une des deux "
#~ "conditions\n"
#~ "                              est satisfaite."

#~ msgid " -h, --help                   Print this message and exit."
#~ msgstr " -h, --help                   Imprime ce message et quitte."

#~ msgid ""
#~ " You can specify multiple URLs. All URLs must point to the same file\n"
#~ " or downloading will fail."
#~ msgstr ""
#~ " Vous pouvez spécifier plusieurs URLs. Tous les URLs doivent pointer vers "
#~ "le même fichier\n"
#~ " sinon le téléchargement échoue."

#~ msgid "Examples:"
#~ msgstr "Exemples:"

#~ msgid " Download a file using 1 connection:"
#~ msgstr " Téléchargez un fichier avec 1 connexion:"

#~ msgid " Download a file using 2 connections:"
#~ msgstr " Téléchargez un fichier avec 2 connexions:"

#~ msgid ""
#~ " Download a file using 2 connections, each connects to a different server:"
#~ msgstr ""
#~ " Téléchargez un fichier avec 2 connexions, chacune se connectant à un "
#~ "serveur différent:"

#~ msgid " You can mix up different protocols:"
#~ msgstr " Vous pouvez mélanger différents protocoles:"

#~ msgid " Download a torrent:"
#~ msgstr " Téléchargez un torrent:"

#~ msgid " Download a torrent using a local .torrent file:"
#~ msgstr " Téléchargez un torrent en utilisant un fichier local .torrent:"

#~ msgid " Download only selected files:"
#~ msgstr " Télécharger seulement les fichiers séléctionnés:"

#~ msgid " Print file listing of .torrent file:"
#~ msgstr " Imprimer la liste des fichiers .torrent:"

#~ msgid " Metalink downloading:"
#~ msgstr " Téléchargement Metalink:"

#~ msgid " Download a file using local .metalink file:"
#~ msgstr " Télécharger un fichier en utilisant un fichier local .metalink:"

#~ msgid " Metalink downloading with preferences:"
#~ msgstr " Téléchargement Metalink avec comme préférences:"

#~ msgid " Download only selected files using index:"
#~ msgstr ""
#~ " Télécharger seulement les fichiers sélectionnés en utilisant l'index:"

#~ msgid " Print file listing of .metalink file:"
#~ msgstr " Imprimer la liste de fichiers du fichier .metalink:"

#~ msgid ""
#~ " --file-allocation=METHOD     Specify file allocation method. METHOD is "
#~ "either\n"
#~ "                              'none' or 'prealloc'. 'none' doesn't pre-"
#~ "allocate\n"
#~ "                              file space. 'prealloc' pre-allocates file "
#~ "space\n"
#~ "                              before download begins. This may take some "
#~ "time\n"
#~ "                              depending on the size of the file.\n"
#~ "                              Default: prealloc"
#~ msgstr ""
#~ " --file-allocation=METHOD     Spécifier la méthode d'allocation de "
#~ "fichier. METHOD est soit\n"
#~ "                              'none' ou 'prealloc'.\n"
#~ "                              'none' n'alloue pas d'espace disque au "
#~ "préalable pour le fichier. 'prealloc'\n"
#~ "                              alloue de l'espace disque au préalable pour "
#~ "le fichier.\n"
#~ "                              Ceci peut prendre du temps selon la taille "
#~ "du fichier\n"
#~ "                              Défaut: prealloc"