# Spanish translation for aria2 # Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007 # This file is distributed under the same license as the aria2 package. # FIRST AUTHOR , 2007. # msgid "" msgstr "" "Project-Id-Version: aria2\n" "Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n" "POT-Creation-Date: 2011-08-02 21:25+0900\n" "PO-Revision-Date: 2011-05-21 00:08+0900\n" "Last-Translator: Fitoschido \n" "Language-Team: LANGUAGE \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Launchpad-Export-Date: 2011-05-20 14:56+0000\n" "X-Generator: Launchpad (build 13085)\n" #: src/DownloadEngine.cc:228 msgid "" "Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown." msgstr "" "Iniciando secuencia de parada... Pulse Ctrl-C otra vez para efectuar una " "parada de urgencia." #: src/DownloadEngine.cc:235 msgid "Emergency shutdown sequence commencing..." msgstr "Iniciando secuencia de parada de urgencia..." #: src/MultiUrlRequestInfo.cc:157 msgid "aria2 will resume download if the transfer is restarted." msgstr "Si reinicia la transferencia, aria2 continuará con la descarga." #: src/MultiUrlRequestInfo.cc:159 msgid "" "If there are any errors, then see the log file. See '-l' option in help/man " "page for details." msgstr "" "Compruebe el archivo de registro si se producen errores. Para más " "información vea la opción '-l' en las páginas help/man." #: src/RequestGroupMan.cc:603 msgid "Download Results:" msgstr "Resultados de la descarga:" #: src/RequestGroupMan.cc:640 msgid "Status Legend:" msgstr "Leyenda:" #: src/OptionHandler.cc:38 msgid " Default: " msgstr " Predeterminado: " #: src/OptionHandler.cc:39 msgid " Tags: " msgstr " Etiquetas: " #: src/OptionHandler.cc:40 msgid " Possible Values: " msgstr " Valores válidos: " #: src/usage_text.h:37 msgid "" " -d, --dir=DIR The directory to store the downloaded file." msgstr "" " -d, --dir=DIR Directorio donde grabara el archivo descargado." #: src/usage_text.h:39 msgid "" " -o, --out=FILE The file name of the downloaded file. When -Z\n" " option is used, this option is ignored." msgstr "" " -o, --out=FILE El nombre del archivo descargado. Cuando la " "opción -Z\n" " se utiliza, esta opción es ignorada." #: src/usage_text.h:42 msgid "" " -l, --log=LOG The file name of the log file. If '-' is\n" " specified, log is written to stdout." msgstr "" " -l, --log=LOG El nombre del fichero de anotaciones.. Si se " "pone '-',\n" " las anotaciones se escriben en stdout." #: src/usage_text.h:45 msgid "" " -D, --daemon[=true|false] Run as daemon. The current working directory " "will\n" " be changed to \"/\" and standard input, " "standard\n" " output and standard error will be redirected " "to\n" " \"/dev/null\"." msgstr "" #: src/usage_text.h:50 msgid "" " -s, --split=N Download a file using N connections. If more\n" " than N URLs are given, first N URLs are used " "and\n" " remaining URLs are used for backup. If less " "than\n" " N URLs are given, those URLs are used more " "than\n" " once so that N connections total are made\n" " simultaneously. The number of connections to " "the\n" " same host is restricted by\n" " --max-connection-per-server option. Please see " "-j\n" " and --min-split-size option too.\n" " Please note that in Metalink download, this\n" " option has no effect and use -C option instead." msgstr "" #: src/usage_text.h:62 msgid "" " --retry-wait=SEC Set the seconds to wait between retries. \n" " With SEC > 0, aria2 will retry download when " "the\n" " HTTP server returns 503 response." msgstr "" #: src/usage_text.h:66 msgid " -t, --timeout=SEC Set timeout in seconds." msgstr "" " -t, --timeout=SEG Establecer el tiempo de espera máximo\n" " en segundos." #: src/usage_text.h:68 msgid " -m, --max-tries=N Set number of tries. 0 means unlimited." msgstr "" " -m, --max-tries=N Establecer número de intentos. \n" " 0 para ilimitados." #: src/usage_text.h:70 msgid "" " --http-proxy=PROXY Use this proxy server for HTTP. To erase\n" " previously defined proxy, use \"\".\n" " See also --all-proxy option.\n" " This affects all URLs." msgstr "" #: src/usage_text.h:75 msgid "" " --https-proxy=PROXY Use this proxy server for HTTPS. To erase\n" " previously defined proxy, use \"\".\n" " See also --all-proxy option.\n" " This affects all URLs." msgstr "" #: src/usage_text.h:80 msgid "" " --ftp-proxy=PROXY Use this proxy server for FTP. To erase " "previously\n" " defined proxy, use \"\".\n" " See also --all-proxy option.\n" " This affects all URLs." msgstr "" #: src/usage_text.h:85 msgid "" " --all-proxy=PROXY Use this proxy server for all protocols. To " "erase\n" " previously defined proxy, use \"\".\n" " You can override this setting and specify a\n" " proxy server for a particular protocol using\n" " --http-proxy, --https-proxy and --ftp-proxy\n" " options.\n" " This affects all URLs." msgstr "" #: src/usage_text.h:93 msgid " --http-user=USER Set HTTP user. This affects all URLs." msgstr "" " --http-user=USUARIO Establecer el usuario HTTP. \n" " Afecta a todas las URL." #: src/usage_text.h:95 msgid " --http-passwd=PASSWD Set HTTP password. This affects all URLs." msgstr "" " --http-passwd=CONT Establecer la contraseña HTTP.\n" " Afecta a todas las URL." #: src/usage_text.h:97 msgid " --proxy-method=METHOD Set the method to use in proxy request." msgstr "" " --proxy-method=METHOD Establece el método a usar en las peticiones proxy." #: src/usage_text.h:99 msgid " --referer=REFERER Set Referer. This affects all URLs." msgstr "" " --referer=REFERER Establece la referencia. Esto afecta a todas " "las URLs." #: src/usage_text.h:101 msgid " --ftp-user=USER Set FTP user. This affects all URLs." msgstr "" " --ftp-user=USER Establece el usuario FTP. Esto afecta a todas las URLs." #: src/usage_text.h:103 msgid " --ftp-passwd=PASSWD Set FTP password. This affects all URLs." msgstr "" " --ftp-passwd=PASSWD Establece la contraseña FTP. Esto afecta a todas las " "URLs." #: src/usage_text.h:105 msgid " --ftp-type=TYPE Set FTP transfer type." msgstr " --ftp-type=TYPE Estable el tipo de transferencia FTP." #: src/usage_text.h:107 msgid "" " -p, --ftp-pasv[=true|false] Use the passive mode in FTP. If false is " "given,\n" " the active mode will be used." msgstr "" #: src/usage_text.h:110 msgid "" " --lowest-speed-limit=SPEED Close connection if download speed is lower " "than\n" " or equal to this value(bytes per sec).\n" " 0 means aria2 does not have a lowest speed " "limit.\n" " You can append K or M(1K = 1024, 1M = 1024K).\n" " This option does not affect BitTorrent " "downloads." msgstr "" #: src/usage_text.h:116 msgid "" " --max-overall-download-limit=SPEED Set max overall download speed in bytes/" "sec.\n" " 0 means unrestricted.\n" " You can append K or M(1K = 1024, 1M = 1024K).\n" " To limit the download speed per download, use\n" " --max-download-limit option." msgstr "" #: src/usage_text.h:122 msgid "" " --max-download-limit=SPEED Set max download speed per each download in\n" " bytes/sec. 0 means unrestricted.\n" " You can append K or M(1K = 1024, 1M = 1024K).\n" " To limit the overall download speed, use\n" " --max-overall-download-limit option." msgstr "" #: src/usage_text.h:128 msgid "" " --file-allocation=METHOD Specify file allocation method.\n" " 'none' doesn't pre-allocate file space. " "'prealloc'\n" " pre-allocates file space before download " "begins.\n" " This may take some time depending on the size " "of\n" " the file.\n" " If you are using newer file systems such as " "ext4\n" " (with extents support), btrfs, xfs or NTFS\n" " (MinGW build only), 'falloc' is your best\n" " choice. It allocates large(few GiB) files\n" " almost instantly. Don't use 'falloc' with " "legacy\n" " file systems such as ext3 and FAT32 because " "it\n" " takes almost same time as 'prealloc' and it\n" " blocks aria2 entirely until allocation " "finishes.\n" " 'falloc' may not be available if your system\n" " doesn't have posix_fallocate() function." msgstr "" #: src/usage_text.h:144 msgid "" " --no-file-allocation-limit=SIZE No file allocation is made for files whose\n" " size is smaller than SIZE.\n" " You can append K or M(1K = 1024, 1M = 1024K)." msgstr "" " --no-file-allocation-limit=SIZE No se reserva espacio para archivos cuya\n" " medida es más pequeña que SIZE.\n" " Usted puede añadir K o M(1K = 1024, 1M = " "1024K)." #: src/usage_text.h:148 msgid "" " --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage " "while\n" " allocating files.\n" " Turn off if you encounter any error" msgstr "" " --enable-direct-io[=true|false] Acivar E/S directa, que minimiza el uso de " "CPU cuando\n" " se reserva espacio para los archivos.\n" " Desactivelo si encuentra algún error." #: src/usage_text.h:152 msgid "" " --allow-overwrite[=true|false] Restart download from scratch if the\n" " corresponding control file doesn't exist. " "See\n" " also --auto-file-renaming option." msgstr "" #: src/usage_text.h:156 msgid "" " --allow-piece-length-change[=true|false] If false is given, aria2 aborts\n" " download when a piece length is different " "from\n" " one in a control file. If true is given, you " "can\n" " proceed but some download progress will be " "lost." msgstr "" #: src/usage_text.h:161 msgid "" " -Z, --force-sequential[=true|false] Fetch URIs in the command-line " "sequentially\n" " and download each URI in a separate session, " "like\n" " the usual command-line download utilities." msgstr "" #: src/usage_text.h:165 msgid "" " --auto-file-renaming[=true|false] Rename file name if the same file " "already\n" " exists. This option works only in http(s)/ftp\n" " download.\n" " The new file name has a dot and a number" "(1..9999)\n" " appended." msgstr "" #: src/usage_text.h:171 msgid "" " -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n" " You can specify set of parts:\n" " http://{sv1,sv2,sv3}/foo.iso\n" " Also you can specify numeric sequences with " "step\n" " counter:\n" " http://host/image[000-100:2].img\n" " A step counter can be omitted.\n" " If all URIs do not point to the same file, " "such\n" " as the second example above, -Z option is\n" " required." msgstr "" #: src/usage_text.h:182 msgid "" " --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection." msgstr "" " --enable-http-keep-alive[=true|false] Habilitar conexiones persistentes " "HTTP/1.1." #: src/usage_text.h:184 msgid " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining." msgstr "" " --enable-http-pipelining[=true|false] Habilitar canalización HTTP/1.1." #: src/usage_text.h:186 msgid "" " -V, --check-integrity[=true|false] Check file integrity by validating " "piece\n" " hashes. This option has effect only in " "BitTorrent\n" " and Metalink downloads with chunk checksums.\n" " Use this option to re-download a damaged " "portion\n" " of a file. See also --bt-hash-check-seed " "option." msgstr "" #: src/usage_text.h:192 msgid "" " --bt-hash-check-seed[=true|false] If true is given, after hash check using\n" " --check-integrity option and file is " "complete,\n" " continue to seed file. If you want to check " "file\n" " and download it only when it is damaged or\n" " incomplete, set this option to false.\n" " This option has effect only on BitTorrent\n" " download." msgstr "" #: src/usage_text.h:200 msgid "" " --realtime-chunk-checksum[=true|false] Validate chunk of data by " "calculating\n" " checksum while downloading a file if chunk\n" " checksums are provided." msgstr "" #: src/usage_text.h:204 msgid "" " -c, --continue[=true|false] Continue downloading a partially downloaded\n" " file. Use this option to resume a download\n" " started by a web browser or another program\n" " which downloads files sequentially from the\n" " beginning. Currently this option is only\n" " applicable to http(s)/ftp downloads." msgstr "" #: src/usage_text.h:211 msgid " -U, --user-agent=USER_AGENT Set user agent for http(s) downloads." msgstr "" " -U, --user-agent=USER_AGENT Establece el agente de usuario para descargas " "http." #: src/usage_text.h:213 msgid " -n, --no-netrc[=true|false] Disables netrc support." msgstr "" #: src/usage_text.h:215 msgid "" " -i, --input-file=FILE Downloads URIs found in FILE. You can specify\n" " multiple URIs for a single entity: separate\n" " URIs on a single line using the TAB " "character.\n" " Reads input from stdin when '-' is specified.\n" " Additionally, options can be specified after " "each\n" " line of URI. This optional line must start " "with\n" " one or more white spaces and have one option " "per\n" " single line. See INPUT FILE section of man " "page\n" " for details." msgstr "" #: src/usage_text.h:225 msgid "" " -j, --max-concurrent-downloads=N Set maximum number of parallel downloads " "for\n" " every static (HTTP/FTP) URL, torrent and " "metalink.\n" " See also -s and -C options." msgstr "" #: src/usage_text.h:229 msgid "" " --load-cookies=FILE Load Cookies from FILE using the Firefox3 " "format\n" " and Mozilla/Firefox(1.x/2.x)/Netscape format." msgstr "" #: src/usage_text.h:232 msgid "" " --save-cookies=FILE Save Cookies to FILE in Mozilla/Firefox(1.x/2." "x)/\n" " Netscape format. If FILE already exists, it " "is\n" " overwritten. Session Cookies are also saved " "and\n" " their expiry values are treated as 0." msgstr "" #: src/usage_text.h:237 msgid "" " -S, --show-files[=true|false] Print file listing of .torrent, .meta4 and\n" " .metalink file and exit. More detailed\n" " information will be listed in case of torrent\n" " file." msgstr "" #: src/usage_text.h:242 msgid "" " --select-file=INDEX... Set file to download by specifying its index.\n" " You can find the file index using the\n" " --show-files option. Multiple indexes can be\n" " specified by using ',', for example: \"3,6\".\n" " You can also use '-' to specify a range: " "\"1-5\".\n" " ',' and '-' can be used together.\n" " When used with the -M option, index may vary\n" " depending on the query(see --metalink-* " "options)." msgstr "" #: src/usage_text.h:251 msgid " -T, --torrent-file=TORRENT_FILE The path to the .torrent file." msgstr " -T, --torrent-file=TORRENT_FILE El camino al fichero .torrent." #: src/usage_text.h:253 msgid "" " --follow-torrent=true|false|mem If true or mem is specified, when a file\n" " whose suffix is .torrent or content type is\n" " application/x-bittorrent is downloaded, aria2\n" " parses it as a torrent file and downloads " "files\n" " mentioned in it.\n" " If mem is specified, a torrent file is not\n" " written to the disk, but is just kept in " "memory.\n" " If false is specified, the action mentioned " "above\n" " is not taken." msgstr "" #: src/usage_text.h:263 msgid "" " --listen-port=PORT... Set TCP port number for BitTorrent downloads.\n" " Multiple ports can be specified by using ',',\n" " for example: \"6881,6885\". You can also use " "'-'\n" " to specify a range: \"6881-6999\". ',' and '-' " "can\n" " be used together." msgstr "" " --listen-port=PORT... Fija el puerto TCP para las dercargas bittorrent\n" "Multiples puertos pueden ser especificados separando por ','\n" "por ejemplo \"6881,6885\". Tambien puede usar '-'\n" "para especificar un rango de puertos: \"6881-6999\" ',' y '-' pueden \n" "ser usados juntos." #: src/usage_text.h:269 msgid "" " --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/" "sec.\n" " 0 means unrestricted.\n" " You can append K or M(1K = 1024, 1M = 1024K).\n" " To limit the upload speed per torrent, use\n" " --max-upload-limit option." msgstr "" #: src/usage_text.h:275 msgid "" " -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n" " bytes/sec. 0 means unrestricted.\n" " You can append K or M(1K = 1024, 1M = 1024K).\n" " To limit the overall upload speed, use\n" " --max-overall-upload-limit option." msgstr "" #: src/usage_text.h:281 msgid "" " --seed-time=MINUTES Specify seeding time in minutes. Also see the\n" " --seed-ratio option." msgstr "" " --seed-time=MINUTES Especifica el tiempo de sembrar en minuts. " "Mirar también\n" " la opción --seed-ratio." #: src/usage_text.h:284 msgid "" " --seed-ratio=RATIO Specify share ratio. Seed completed torrents\n" " until share ratio reaches RATIO.\n" " You are strongly encouraged to specify equals " "or\n" " more than 1.0 here. Specify 0.0 if you intend " "to\n" " do seeding regardless of share ratio.\n" " If --seed-time option is specified along with\n" " this option, seeding ends when at least one " "of\n" " the conditions is satisfied." msgstr "" #: src/usage_text.h:293 msgid "" " --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID " "in\n" " BitTorrent is 20 byte length. If more than 20\n" " bytes are specified, only first 20 bytes are\n" " used. If less than 20 bytes are specified, " "random\n" " byte data are added to make its length 20 " "bytes." msgstr "" #: src/usage_text.h:299 msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension." msgstr "" #: src/usage_text.h:301 msgid " --enable-dht[=true|false] Enable IPv4 DHT functionality." msgstr "" #: src/usage_text.h:303 msgid "" " --dht-listen-port=PORT... Set UDP listening port for both IPv4 and IPv6\n" " DHT. Multiple ports can be specified by using\n" " ',', for example: \"6881,6885\". You can also\n" " use '-' to specify a range: \"6881-6999\". " "','\n" " and '-' can be used together." msgstr "" #: src/usage_text.h:309 msgid "" " --dht-entry-point=HOST:PORT Set host and port as an entry point to IPv4 " "DHT\n" " network." msgstr "" #: src/usage_text.h:312 msgid "" " --dht-file-path=PATH Change the IPv4 DHT routing table file to PATH." msgstr "" #: src/usage_text.h:314 msgid "" " --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n" " If several encryption methods are provided by " "a\n" " peer, aria2 chooses the lowest one which " "satisfies\n" " the given level." msgstr "" #: src/usage_text.h:319 msgid "" " --bt-require-crypto[=true|false] If true is given, aria2 doesn't accept " "and\n" " establish connection with legacy BitTorrent\n" " handshake. Thus aria2 always uses Obfuscation\n" " handshake." msgstr "" #: src/usage_text.h:324 msgid "" " --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n" " torrent is lower than SPEED, aria2 " "temporarily\n" " increases the number of peers to try for more\n" " download speed. Configuring this option with " "your\n" " preferred download speed can increase your\n" " download speed in some cases.\n" " You can append K or M(1K = 1024, 1M = 1024K)." msgstr "" #: src/usage_text.h:332 msgid "" " --bt-max-open-files=NUM Specify maximum number of files to open in " "each\n" " BitTorrent download." msgstr "" " --bt-max-open-files=NUM Especifica el numero maximo de archivos a " "abrir en cada \n" "descarga Bittorrent." #: src/usage_text.h:335 msgid "" " --bt-seed-unverified[=true|false] Seed previously downloaded files without\n" " verifying piece hashes." msgstr "" #: src/usage_text.h:338 msgid "" " --bt-max-peers=NUM Specify the maximum number of peers per " "torrent.\n" " 0 means unlimited.\n" " See also --bt-request-peer-speed-limit option." msgstr "" #: src/usage_text.h:342 msgid "" " -M, --metalink-file=METALINK_FILE The file path to the .meta4 and ." "metalink\n" " file. Reads input from stdin when '-' is\n" " specified." msgstr "" #: src/usage_text.h:346 msgid "" " -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n" " simultaneously. Some Metalinks regulate the\n" " number of servers to connect. aria2 strictly\n" " respects them. This means that if Metalink " "defines\n" " the maxconnections attribute lower than\n" " NUM_SERVERS, then aria2 uses the value of\n" " maxconnections attribute instead of " "NUM_SERVERS.\n" " See also -s and -j options." msgstr "" #: src/usage_text.h:355 msgid " --metalink-version=VERSION The version of the file to download." msgstr " --metalink-version=VERSION La versión del fichero a descargar." #: src/usage_text.h:357 msgid " --metalink-language=LANGUAGE The language of the file to download." msgstr " --metalink-language=LANGUAGE El idioma del fichero a descargar." #: src/usage_text.h:359 msgid "" " --metalink-os=OS The operating system of the file to download." msgstr "" " --metalink-os=OS El Sistema Operativo del fichero a descargar." #: src/usage_text.h:361 msgid "" " --metalink-location=LOCATION[,...] The location of the preferred server.\n" " A comma-delimited list of locations is\n" " acceptable." msgstr "" #: src/usage_text.h:365 msgid "" " --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify " "'none'\n" " if you don't have any preferred protocol." msgstr "" #: src/usage_text.h:368 msgid "" " --follow-metalink=true|false|mem If true or mem is specified, when a file\n" " whose suffix is .meta4 or .metalink, or " "content\n" " type of application/metalink4+xml or\n" " application/metalink+xml is downloaded, aria2\n" " parses it as a metalink file and downloads " "files\n" " mentioned in it.\n" " If mem is specified, a metalink file is not\n" " written to the disk, but is just kept in " "memory.\n" " If false is specified, the action mentioned " "above\n" " is not taken." msgstr "" #: src/usage_text.h:379 msgid "" " --metalink-enable-unique-protocol[=true|false] If true is given and " "several\n" " protocols are available for a mirror in a " "metalink\n" " file, aria2 uses one of them.\n" " Use --metalink-preferred-protocol option to\n" " specify the preference of protocol." msgstr "" #: src/usage_text.h:385 msgid " -v, --version Print the version number and exit." msgstr " -v, --version Escribir el número de versión y salir." #: src/usage_text.h:387 msgid "" " -h, --help[=TAG|KEYWORD] Print usage and exit.\n" " The help messages are classified with tags. A " "tag\n" " starts with \"#\". For example, type \"--" "help=#http\"\n" " to get the usage for the options tagged with\n" " \"#http\". If non-tag word is given, print the " "usage\n" " for the options whose name includes that word." msgstr "" #: src/usage_text.h:394 msgid " --no-conf[=true|false] Disable loading aria2.conf file." msgstr "" #: src/usage_text.h:396 msgid "" " --conf-path=PATH Change the configuration file path to PATH." msgstr "" #: src/usage_text.h:398 msgid "" " --stop=SEC Stop application after SEC seconds has " "passed.\n" " If 0 is given, this feature is disabled." msgstr "" #: src/usage_text.h:401 msgid "" " --header=HEADER Append HEADER to HTTP request header. You can " "use\n" " this option repeatedly to specify more than " "one\n" " header:\n" " aria2c --header=\"X-A: b78\" --header=\"X-B: " "9J1\"\n" " http://host/file" msgstr "" #: src/usage_text.h:407 msgid " -q, --quiet[=true|false] Make aria2 quiet(no console output)." msgstr "" #: src/usage_text.h:409 msgid " --async-dns[=true|false] Enable asynchronous DNS." msgstr "" #: src/usage_text.h:411 msgid " --ftp-reuse-connection[=true|false] Reuse connection in FTP." msgstr "" #: src/usage_text.h:413 msgid "" " --summary-interval=SEC Set interval to output download progress " "summary.\n" " Setting 0 suppresses the output." msgstr "" #: src/usage_text.h:416 msgid " --log-level=LEVEL Set log level to output." msgstr "" #: src/usage_text.h:418 msgid "" " -R, --remote-time[=true|false] Retrieve timestamp of the remote file from " "the\n" " remote HTTP/FTP server and if it is " "available,\n" " apply it to the local file." msgstr "" #: src/usage_text.h:422 msgid "" " --connect-timeout=SEC Set the connect timeout in seconds to " "establish\n" " connection to HTTP/FTP/proxy server. After " "the\n" " connection is established, this option makes " "no\n" " effect and --timeout option is used instead." msgstr "" #: src/usage_text.h:427 msgid "" " --max-file-not-found=NUM If aria2 receives `file not found' status from " "the\n" " remote HTTP/FTP servers NUM times without " "getting\n" " a single byte, then force the download to " "fail.\n" " Specify 0 to disable this option.\n" " This options is effective only when using\n" " HTTP/FTP servers." msgstr "" #: src/usage_text.h:434 msgid "" " --uri-selector=SELECTOR Specify URI selection algorithm.\n" " If 'inorder' is given, URI is tried in the " "order\n" " appeared in the URI list.\n" " If 'feedback' is given, aria2 uses download " "speed\n" " observed in the previous downloads and choose\n" " fastest server in the URI list. This also\n" " effectively skips dead mirrors. The observed\n" " download speed is a part of performance " "profile\n" " of servers mentioned in --server-stat-of and\n" " --server-stat-if options.\n" " If 'adaptive' is given, selects one of the " "best\n" " mirrors for the first and reserved " "connections.\n" " For supplementary ones, it returns mirrors " "which\n" " has not been tested yet, and if each of them " "has\n" " already been tested, returns mirrors which has " "to\n" " be tested again. Otherwise, it doesn't select\n" " anymore mirrors. Like 'feedback', it uses a\n" " performance profile of servers." msgstr "" #: src/usage_text.h:453 msgid "" " --server-stat-of=FILE Specify the filename to which performance " "profile\n" " of the servers is saved. You can load saved " "data\n" " using --server-stat-if option." msgstr "" #: src/usage_text.h:457 msgid "" " --server-stat-if=FILE Specify the filename to load performance " "profile\n" " of the servers. The loaded data will be used " "in\n" " some URI selector such as 'feedback'.\n" " See also --uri-selector option" msgstr "" #: src/usage_text.h:462 msgid "" " --server-stat-timeout=SEC Specifies timeout in seconds to invalidate\n" " performance profile of the servers since the " "last\n" " contact to them." msgstr "" #: src/usage_text.h:466 msgid "" " --auto-save-interval=SEC Save a control file(*.aria2) every SEC " "seconds.\n" " If 0 is given, a control file is not saved " "during\n" " download. aria2 saves a control file when it " "stops\n" " regardless of the value." msgstr "" #: src/usage_text.h:471 msgid "" " --certificate=FILE Use the client certificate in FILE.\n" " The certificate must be in PEM format.\n" " You may use --private-key option to specify " "the\n" " private key." msgstr "" #: src/usage_text.h:476 msgid "" " --private-key=FILE Use the private key in FILE.\n" " The private key must be decrypted and in PEM\n" " format. See also --certificate option." msgstr "" #: src/usage_text.h:480 msgid "" " --ca-certificate=FILE Use the certificate authorities in FILE to " "verify\n" " the peers. The certificate file must be in " "PEM\n" " format and can contain multiple CA " "certificates.\n" " Use --check-certificate option to enable\n" " verification." msgstr "" #: src/usage_text.h:486 msgid "" " --check-certificate[=true|false] Verify the peer using certificates " "specified\n" " in --ca-certificate option." msgstr "" #: src/usage_text.h:489 msgid "" " --no-proxy=DOMAINS Specify comma separated hostnames, domains or\n" " network address with or without CIDR block " "where\n" " proxy should not be used." msgstr "" #: src/usage_text.h:493 msgid "" " --use-head[=true|false] Use HEAD method for the first request to the " "HTTP\n" " server." msgstr "" #: src/usage_text.h:496 msgid " --event-poll=POLL Specify the method for polling events." msgstr "" #: src/usage_text.h:498 msgid "" " --bt-external-ip=IPADDRESS Specify the external IP address to report to " "a\n" " BitTorrent tracker. Although this function is\n" " named 'external', it can accept any kind of " "IP\n" " addresses." msgstr "" #: src/usage_text.h:503 msgid "" " --http-auth-challenge[=true|false] Send HTTP authorization header only when " "it\n" " is requested by the server. If false is set, " "then\n" " authorization header is always sent to the " "server.\n" " There is an exception: if username and " "password\n" " are embedded in URI, authorization header is\n" " always sent to the server regardless of this\n" " option." msgstr "" #: src/usage_text.h:511 msgid "" " -O, --index-out=INDEX=PATH Set file path for file with index=INDEX. You " "can\n" " find the file index using the --show-files " "option.\n" " PATH is a relative path to the path specified " "in\n" " --dir option. You can use this option " "multiple\n" " times." msgstr "" #: src/usage_text.h:517 msgid "" " --dry-run[=true|false] If true is given, aria2 just checks whether " "the\n" " remote file is available and doesn't download\n" " data. This option has effect on HTTP/FTP " "download.\n" " BitTorrent downloads are canceled if true is\n" " specified." msgstr "" #: src/usage_text.h:523 msgid "" " --bt-tracker-interval=SEC Set the interval in seconds between tracker\n" " requests. This completely overrides interval " "value\n" " and aria2 just uses this value and ignores " "the\n" " min interval and interval value in the " "response of\n" " tracker. If 0 is set, aria2 determines " "interval\n" " based on the response of tracker and the " "download\n" " progress." msgstr "" #: src/usage_text.h:531 msgid "" " --on-download-complete=COMMAND Set the command to be executed after " "download\n" " completed.\n" " See --on-download-start option for the\n" " requirement of COMMAND.\n" " See also --on-download-stop option." msgstr "" #: src/usage_text.h:537 msgid "" " --on-download-start=COMMAND Set the command to be executed after download\n" " got started. aria2 passes 3 arguments to " "COMMAND:\n" " GID, the nubmer of files and file path. See " "Event\n" " Hook in man page for more details." msgstr "" #: src/usage_text.h:542 msgid "" " --on-download-pause=COMMAND Set the command to be executed after download\n" " was paused.\n" " See --on-download-start option for the\n" " requirement of COMMAND." msgstr "" #: src/usage_text.h:547 msgid "" " --on-download-error=COMMAND Set the command to be executed after download\n" " aborted due to error.\n" " See --on-download-start option for the\n" " requirement of COMMAND.\n" " See also --on-download-stop option." msgstr "" #: src/usage_text.h:553 msgid "" " --on-download-stop=COMMAND Set the command to be executed after download\n" " stopped. You can override the command to be\n" " executed for particular download result using\n" " --on-download-complete and --on-download-" "error. If\n" " they are specified, command specified in this\n" " option is not executed.\n" " See --on-download-start option for the\n" " requirement of COMMAND." msgstr "" #: src/usage_text.h:562 msgid "" " --bt-stop-timeout=SEC Stop BitTorrent download if download speed is " "0 in\n" " consecutive SEC seconds. If 0 is given, this\n" " feature is disabled." msgstr "" #: src/usage_text.h:566 msgid "" " --bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and " "last\n" " pieces of each file first. This is useful for\n" " previewing files. The argument can contain 2\n" " keywords:head and tail. To include both " "keywords,\n" " they must be separated by comma. These " "keywords\n" " can take one parameter, SIZE. For example, if\n" " head=SIZE is specified, pieces in the range " "of\n" " first SIZE bytes of each file get higher " "priority.\n" " tail=SIZE means the range of last SIZE bytes " "of\n" " each file. SIZE can include K or M(1K = 1024, " "1M =\n" " 1024K). If SIZE is omitted, SIZE=1M is used." msgstr "" #: src/usage_text.h:578 msgid "" " --interface=INTERFACE Bind sockets to given interface. You can " "specify\n" " interface name, IP address and hostname." msgstr "" #: src/usage_text.h:581 msgid " --disable-ipv6[=true|false] Disable IPv6." msgstr "" #: src/usage_text.h:583 msgid "" " --bt-save-metadata[=true|false] Save metadata as .torrent file. This option " "has\n" " effect only when BitTorrent Magnet URI is " "used.\n" " The filename is hex encoded info hash with " "suffix\n" " .torrent. The directory to be saved is the " "same\n" " directory where download file is saved. If " "the\n" " same file already exists, metadata is not " "saved.\n" " See also --bt-metadata-only option." msgstr "" #: src/usage_text.h:591 msgid "" " --http-no-cache[=true|false] Send Cache-Control: no-cache and Pragma: no-" "cache\n" " header to avoid cached content. If false is\n" " given, these headers are not sent and you can " "add\n" " Cache-Control header with a directive you " "like\n" " using --header option." msgstr "" #: src/usage_text.h:597 msgid "" " --bt-metadata-only[=true|false] Download metadata only. The file(s) " "described\n" " in metadata will not be downloaded. This " "option\n" " has effect only when BitTorrent Magnet URI is\n" " used. See also --bt-save-metadata option." msgstr "" #: src/usage_text.h:602 msgid "" " --human-readable[=true|false] Print sizes and speed in human readable " "format\n" " (e.g., 1.2Ki, 3.4Mi) in the console readout." msgstr "" #: src/usage_text.h:605 msgid " --bt-enable-lpd[=true|false] Enable Local Peer Discovery." msgstr "" #: src/usage_text.h:607 msgid "" " --bt-lpd-interface=INTERFACE Use given interface for Local Peer Discovery. " "If\n" " this option is not specified, the default\n" " interface is chosen. You can specify " "interface\n" " name and IP address." msgstr "" #: src/usage_text.h:612 msgid "" " --reuse-uri[=true|false] Reuse already used URIs if no unused URIs are\n" " left." msgstr "" #: src/usage_text.h:615 msgid " --all-proxy-user=USER Set user for --all-proxy option." msgstr "" #: src/usage_text.h:617 msgid " --all-proxy-passwd=PASSWD Set password for --all-proxy option." msgstr "" #: src/usage_text.h:619 msgid " --http-proxy-user=USER Set user for --http-proxy option." msgstr "" #: src/usage_text.h:621 msgid " --http-proxy-passwd=PASSWD Set password for --http-proxy option." msgstr "" #: src/usage_text.h:623 msgid " --https-proxy-user=USER Set user for --https-proxy option." msgstr "" #: src/usage_text.h:625 msgid " --https-proxy-passwd=PASSWD Set password for --https-proxy option." msgstr "" #: src/usage_text.h:627 msgid " --ftp-proxy-user=USER Set user for --ftp-proxy option." msgstr "" #: src/usage_text.h:629 msgid " --ftp-proxy-passwd=PASSWD Set password for --ftp-proxy option." msgstr "" #: src/usage_text.h:631 msgid "" " --remove-control-file[=true|false] Remove control file before download. " "Using\n" " with --allow-overwrite=true, download always\n" " starts from scratch. This will be useful for\n" " users behind proxy server which disables " "resume." msgstr "" #: src/usage_text.h:636 msgid "" " --always-resume[=true|false] Always resume download. If true is given, " "aria2\n" " always tries to resume download and if resume " "is\n" " not possible, aborts download. If false is " "given,\n" " when all given URIs do not support resume or\n" " aria2 encounters N URIs which does not " "support\n" " resume (N is the value specified using\n" " --max-resume-failure-tries option), aria2\n" " downloads file from scratch.\n" " See --max-resume-failure-tries option." msgstr "" #: src/usage_text.h:646 msgid "" " --max-resume-failure-tries=N When used with --always-resume=false, aria2\n" " downloads file from scratch when aria2 detects " "N\n" " number of URIs that does not support resume. " "If N\n" " is 0, aria2 downloads file from scratch when " "all\n" " given URIs do not support resume.\n" " See --always-resume option." msgstr "" #: src/usage_text.h:653 msgid " --bt-tracker-timeout=SEC Set timeout in seconds." msgstr "" #: src/usage_text.h:655 msgid "" " --bt-tracker-connect-timeout=SEC Set the connect timeout in seconds to\n" " establish connection to tracker. After the\n" " connection is established, this option makes " "no\n" " effect and --bt-tracker-timeout option is " "used\n" " instead." msgstr "" #: src/usage_text.h:661 msgid " --dht-message-timeout=SEC Set timeout in seconds." msgstr "" #: src/usage_text.h:663 msgid "" " --http-accept-gzip[=true|false] Send 'Accept: deflate, gzip' request " "header\n" " and inflate response if remote server " "responds\n" " with 'Content-Encoding: gzip' or\n" " 'Content-Encoding: deflate'." msgstr "" #: src/usage_text.h:668 #, fuzzy msgid "" " --save-session=FILE Save error/unfinished downloads to FILE on " "exit.\n" " You can pass this output file to aria2c with -" "i\n" " option on restart. Please note that downloads\n" " added by aria2.addTorrent and aria2." "addMetalink\n" " RPC method and whose metadata could not be " "saved\n" " as a file will not be saved. Downloads " "removed\n" " using aria2.remove and aria2.forceRemove will " "not\n" " be saved." msgstr "" " --all-proxy=PROXY Usar este proxy para todos los protocolos.\n" " Esta opción se puede sobreescribir si se\n" " especifica un servidor proxy para un " "protocolo\n" " particular usando las opciones --http-proxy, \n" " --https-proxy o --ftp-proxy.\n" " Esto afecta a todas las URL." #: src/usage_text.h:677 msgid "" " -x, --max-connection-per-server=NUM The maximum number of connections to " "one\n" " server for each download." msgstr "" #: src/usage_text.h:680 msgid "" " -k, --min-split-size=SIZE aria2 does not split less than 2*SIZE byte " "range.\n" " For example, let's consider downloading 20MiB\n" " file. If SIZE is 10M, aria2 can split file " "into 2\n" " range [0-10MiB) and [10MiB-20MiB) and download " "it\n" " using 2 sources(if --split >= 2, of course).\n" " If SIZE is 15M, since 2*15M > 20MiB, aria2 " "does\n" " not split file and download it using 1 " "source.\n" " You can append K or M(1K = 1024, 1M = 1024K)." msgstr "" #: src/usage_text.h:689 msgid "" " --conditional-get[=true|false] Download file only when the local file is " "older\n" " than remote file. Currently, this function " "has\n" " many limitations. See man page for details." msgstr "" #: src/usage_text.h:693 msgid "" " --on-bt-download-complete=COMMAND For BitTorrent, a command specified in\n" " --on-download-complete is called after " "download\n" " completed and seeding is over. On the other " "hand,\n" " this option sets the command to be executed " "after\n" " download completed but before seeding.\n" " See --on-download-start option for the\n" " requirement of COMMAND." msgstr "" #: src/usage_text.h:701 msgid "" " --enable-async-dns6[=true|false] Enable IPv6 name resolution in " "asynchronous\n" " DNS resolver. This option will be ignored " "when\n" " --async-dns=false." msgstr "" #: src/usage_text.h:705 msgid "" " --enable-dht6[=true|false] Enable IPv6 DHT functionality.\n" " Use --dht-listen-port option to specify port\n" " number to listen on. See also --dht-listen-" "addr6\n" " option." msgstr "" #: src/usage_text.h:710 msgid "" " --dht-listen-addr6=ADDR Specify address to bind socket for IPv6 DHT. \n" " It should be a global unicast IPv6 address of " "the\n" " host." msgstr "" #: src/usage_text.h:714 msgid "" " --dht-entry-point6=HOST:PORT Set host and port as an entry point to IPv6 " "DHT\n" " network." msgstr "" #: src/usage_text.h:717 msgid "" " --dht-file-path6=PATH Change the IPv6 DHT routing table file to PATH." msgstr "" #: src/usage_text.h:719 msgid "" " --bt-tracker=URI[,...] Comma separated list of additional BitTorrent\n" " tracker's announce URI. These URIs are not\n" " affected by --bt-exclude-tracker option " "because\n" " they are added after URIs in --bt-exclude-" "tracker\n" " option are removed." msgstr "" #: src/usage_text.h:725 msgid "" " --bt-exclude-tracker=URI[,...] Comma separated list of BitTorrent " "tracker's\n" " announce URI to remove. You can use special " "value\n" " '*' which matches all URIs, thus removes all\n" " announce URIs. When specifying '*' in shell\n" " command-line, don't forget to escape or quote " "it.\n" " See also --bt-tracker option." msgstr "" #: src/usage_text.h:732 msgid "" " --max-download-result=NUM Set maximum number of download result kept in\n" " memory. The download results are completed/" "error/\n" " removed downloads. The download results are " "stored\n" " in FIFO queue and it can store at most NUM\n" " download results. When queue is full and new\n" " download result is created, oldest download " "result\n" " is removed from the front of the queue and new " "one\n" " is pushed to the back. Setting big number in " "this\n" " option may result high memory consumption " "after\n" " thousands of downloads. Specifying 0 means no\n" " download result is kept." msgstr "" #: src/usage_text.h:744 msgid "" " --async-dns-server=IPADDRESS[,...] Comma separated list of DNS server " "address\n" " used in asynchronous DNS resolver. Usually\n" " asynchronous DNS resolver reads DNS server\n" " addresses from /etc/resolv.conf. When this " "option\n" " is used, it uses DNS servers specified in " "this\n" " option instead of ones in /etc/resolv.conf. " "You\n" " can specify both IPv4 and IPv6 address. This\n" " option is useful when the system does not " "have\n" " /etc/resolv.conf and user does not have the\n" " permission to create it." msgstr "" #: src/usage_text.h:755 msgid "" " --enable-rpc[=true|false] Enable JSON-RPC/XML-RPC server.\n" " It is strongly recommended to set username " "and\n" " password using --rpc-user and --rpc-passwd\n" " option. See also --rpc-listen-port option." msgstr "" #: src/usage_text.h:760 msgid "" " --rpc-max-request-size=SIZE Set max size of JSON-RPC/XML-RPC request. If " "aria2\n" " detects the request is more than SIZE bytes, " "it\n" " drops connection." msgstr "" #: src/usage_text.h:764 msgid " --rpc-user=USER Set JSON-RPC/XML-RPC user." msgstr "" #: src/usage_text.h:766 msgid " --rpc-passwd=PASSWD Set JSON-RPC/XML-RPC password." msgstr "" #: src/usage_text.h:768 msgid "" " --rpc-listen-all[=true|false] Listen incoming JSON-RPC/XML-RPC requests on " "all\n" " network interfaces. If false is given, listen " "only\n" " on local loopback interface." msgstr "" #: src/usage_text.h:772 msgid "" " --rpc-listen-port=PORT Specify a port number for JSON-RPC/XML-RPC " "server\n" " to listen to." msgstr "" #: src/usage_text.h:775 msgid " --enable-xml-rpc[=true|false] Deprecated. Use --enable-rpc instead." msgstr "" #: src/usage_text.h:777 msgid "" " --xml-rpc-max-request-size=SIZE Deprecated. Use --rpc-max-request-size\n" " instead." msgstr "" #: src/usage_text.h:780 msgid " --xml-rpc-user=USER Deprecated. Use --rpc-user instead." msgstr "" #: src/usage_text.h:782 msgid " --xml-rpc-passwd=PASSWD Deprecated. Use --rpc-passwd instead." msgstr "" #: src/usage_text.h:784 msgid "" " --xml-rpc-listen-all[=true|false] Deprecated. Use --rpc-listen-all instead." msgstr "" #: src/usage_text.h:786 msgid "" " --xml-rpc-listen-port=PORT Deprecated. Use --rpc-listen-port instead." msgstr "" #: src/usage_text.h:788 msgid " --show-console-readout[=true|false] Show console readout." msgstr "" #: src/usage_text.h:790 msgid "" " --metalink-base-uri=URI Specify base URI to resolve relative URI in\n" " metalink:url and metalink:metaurl element in " "a\n" " metalink file stored in local disk. If URI " "points\n" " to a directory, URI must end with '/'." msgstr "" #: src/usage_text.h:795 msgid "" " --stream-piece-selector=SELECTOR Specify piece selection algorithm\n" " used in HTTP/FTP download. Piece means fixed\n" " length segment which is downloaded in " "parallel\n" " in segmented download. If 'default' is given,\n" " aria2 selects piece so that it reduces the\n" " number of establishing connection. This is\n" " reasonable default behaviour because\n" " establishing connection is an expensive\n" " operation.\n" " If 'inorder' is given, aria2 selects piece " "which\n" " has minimum index. Index=0 means first of the\n" " file. This will be useful to view movie while\n" " downloading it. --enable-http-pipelining " "option\n" " may be useful to reduce reconnection " "overhead.\n" " Please note that aria2 honors\n" " --min-split-size option, so it will be " "necessary\n" " to specify a reasonable value to\n" " --min-split-size option." msgstr "" #: src/usage_text.h:814 msgid "" " --truncate-console-readout[=true|false] Truncate console readout to fit in\n" " a single line." msgstr "" #: src/usage_text.h:817 msgid "" " --pause[=true|false] Pause download after added. This option is\n" " effective only when --enable-rpc=true is given." msgstr "" #: src/version_usage.cc:57 msgid " version " msgstr " versión " #: src/version_usage.cc:80 #, c-format msgid "Report bugs to %s" msgstr "Informar de errores a %s" #: src/version_usage.cc:85 msgid "" "Usage: aria2c [OPTIONS] [URI | MAGNET | TORRENT_FILE | METALINK_FILE]..." msgstr "" #: src/version_usage.cc:92 msgid "Printing all options." msgstr "" #: src/version_usage.cc:94 #, c-format msgid "Printing options tagged with '%s'." msgstr "" #: src/version_usage.cc:98 #, c-format msgid "See -h option to know other command-line options(%s)." msgstr "" #: src/version_usage.cc:103 src/version_usage.cc:115 msgid "Options:" msgstr "Opciones:" #: src/version_usage.cc:112 #, c-format msgid "Printing options whose name includes '%s'." msgstr "" #: src/version_usage.cc:121 #, c-format msgid "No option matching with '%s'." msgstr "" #: src/version_usage.cc:129 msgid "" " You can specify multiple HTTP(S)/FTP URIs. Unless you specify -Z option, " "all\n" " URIs must point to the same file or downloading will fail." msgstr "" #: src/version_usage.cc:131 msgid "" " You can also specify arbitrary number of BitTorrent Magnet URIs, torrent/\n" " metalink files stored in a local drive. Please note that they are always\n" " treated as a separate download." msgstr "" #: src/version_usage.cc:136 msgid "" " You can specify both torrent file with -T option and URIs. By doing this,\n" " download a file from both torrent swarm and HTTP/FTP server at the same " "time,\n" " while the data from HTTP/FTP are uploaded to the torrent swarm. For single " "file\n" " torrents, URI can be a complete URI pointing to the resource or if URI " "ends\n" " with '/', 'name' in torrent file is added. For multi-file torrents, 'name' " "and\n" " 'path' in torrent are added to form a URI for each file." msgstr "" #: src/version_usage.cc:143 msgid "" " Make sure that URI is quoted with single(') or double(\") quotation if it\n" " contains \"&\" or any characters that have special meaning in shell." msgstr "" #: src/version_usage.cc:153 msgid "Refer to man page for more information." msgstr "Para más información consulte la página man." #: src/message.h:57 #, c-format msgid "GID#%s - Download has already completed: %s" msgstr "" #: src/message.h:106 #, c-format msgid "Unrecognized URI or unsupported protocol: %s" msgstr "URI no reconocida o protocolo no soportado: %s" #: src/message.h:107 #, c-format msgid "Tracker returned warning message: %s" msgstr "El seguidor ha devuelto un mensaje de aviso: %s" #: src/message.h:108 #, c-format msgid "The segment file %s exists." msgstr "El fichero de segmentos %s existe." #: src/message.h:109 #, c-format msgid "The segment file %s does not exist." msgstr "El fichero de segmentos %s no existe." #: src/message.h:110 #, c-format msgid "Saving the segment file %s" msgstr "Guardando el fichero de segmentos %s" #: src/message.h:111 msgid "The segment file was saved successfully." msgstr "El fichero de segmentos se ha guardado satisfactoriamente." #: src/message.h:112 #, c-format msgid "Loading the segment file %s." msgstr "Cargando el fichero de segmentos %s." #: src/message.h:113 msgid "The segment file was loaded successfully." msgstr "Se ha cargado satisfactoriamente el fichero de segmentos." #: src/message.h:114 msgid "No URI to download. Download aborted." msgstr "No hay URI para descargar. descarga cancelada." #: src/message.h:115 #, c-format msgid "" "File %s exists, but a control file(*.aria2) does not exist. Download was " "canceled in order to prevent your file from being truncated to 0. If you are " "sure to download the file all over again, then delete it or add --allow-" "overwrite=true option and restart aria2." msgstr "" "El archivo %s existe, pero un archivo de control (*.aria2) no existe. La " "descarga ha sido canceleda para prevenir que su archivo sea truncado a 0. Si " "usted está seguro de que debe descargar el archivo de todas formas, entonces " "bórrelo o añada la opción --allow-overwrite=true y reinicie aria2." #: src/message.h:116 #, c-format msgid "Allocating file %s, %s bytes" msgstr "Reservando fichero %s, %s bytes" #: src/message.h:117 msgid "File not found" msgstr "No se ha encontrado el fichero" #: src/message.h:118 msgid "Not a directory" msgstr "No es un directorio" #: src/message.h:119 #, c-format msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d" msgstr "" "No hay bastantes sumas de comprobación. Longitud suma comprobación=%d, " "Número sumas comprobación=%d" #: src/message.h:120 #, c-format msgid "Writing file %s" msgstr "Escribiendo fichero %s" #: src/message.h:121 msgid "No peer list received." msgstr "No hemos recibido la lista de iguales." #: src/message.h:122 #, c-format msgid "Adding peer %s:%d" msgstr "Añadiendo igual %s:%d" #: src/message.h:123 #, c-format msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d" msgstr "Borrando pieza usada índice=%d, ratioLlenar(%%)=%d<=%d" #: src/message.h:124 msgid "Download of selected files was complete." msgstr "Se ha completado la descarga de los ficheros seleccionados." #: src/message.h:125 msgid "The download was complete." msgstr "Se ha completado la descarga." #: src/message.h:126 #, c-format msgid "Removed %lu have entries." msgstr "" #: src/message.h:127 #, c-format msgid "Validating file %s" msgstr "Validando fichero %s" #: src/message.h:128 #, c-format msgid "%ld seconds to allocate %s byte(s)" msgstr "" #: src/message.h:131 #, c-format msgid "Metalink: Queueing %s for download." msgstr "Metalink: Poniendo en cola %s para descarga." #: src/message.h:132 #, c-format msgid "Download complete: %s" msgstr "Descarga completa: %s" #: src/message.h:133 msgid "Seeding is over." msgstr "Se ha acabado de sembrar." #: src/message.h:134 msgid "No chunk to verify." msgstr "No hay ningún trozo para verificar." #: src/message.h:135 #, c-format msgid "Good chunk checksum. hash=%s" msgstr "Suma de comprobación del trozo correcta. hash=%s" #: src/message.h:136 #, c-format msgid "Failed to load cookies from %s" msgstr "Fallo al cargar cookies desde %s" #: src/message.h:137 #, c-format msgid "" ".netrc file %s does not have correct permissions. It should be 600. netrc " "support disabled." msgstr "" "El fichero .netrc %s no tiene permisos correctos. Ha de ser 600. soporte " "netrc desactivado." #: src/message.h:138 msgid "Logging started." msgstr "Anotación arrancada." #: src/message.h:139 msgid "Specify at least one URL." msgstr "Especifique al menos una URL." #: src/message.h:140 msgid "daemon failed." msgstr "Ha fallado el daemon." #: src/message.h:141 #, c-format msgid "Verification finished successfully. file=%s" msgstr "La verificación ha acabado satisfactoriamente. fichero=%s" #: src/message.h:142 #, c-format msgid "Checksum error detected. file=%s" msgstr "Se ha detectado un error en la suma de comprobación. fichero=%s" #: src/message.h:143 #, c-format msgid "Incomplete range specified. %s" msgstr "Se ha especificado un intervalo incompleto. %s" #: src/message.h:144 #, c-format msgid "Failed to convert string into value: %s" msgstr "No se pueden convertir los carácteres en un valor: %s" #: src/message.h:145 msgid "Resource not found" msgstr "Recurso no encontrado" #: src/message.h:146 #, c-format msgid "File already exists. Renamed to %s." msgstr "El archivo ya exixte. Renombrado a %s." #: src/message.h:147 msgid "Cannot parse metalink XML file. XML may be malformed." msgstr "" "No se puede interpretar el archivo metalink XML. puede ser XML erróneo." #: src/message.h:148 #, c-format msgid "Too small payload size for %s, size=%lu." msgstr "" #: src/message.h:149 #, c-format msgid "" "Removed the defunct control file %s because the download file %s doesn't " "exist." msgstr "" #: src/message.h:150 #, c-format msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB" msgstr "Su cociente compartido fue %.1f, Subido/Descargado = %sB/%sB" #: src/message.h:151 #, c-format msgid "Missing %s in torrent metainfo." msgstr "Falta %s en la metainfo del torrent" #: src/message.h:152 msgid "Tracker returned null data." msgstr "Tracker retorna datos nulos" #: src/message.h:153 msgid "Windows socket library initialization failed" msgstr "La libreria de Windows socket fallo en la inicializacion" #: src/message.h:154 #, c-format msgid "%ld second(s) has passed. Stopping application." msgstr "" #: src/message.h:155 #, c-format msgid "" "Saved signature as %s. Please note that aria2 doesn't verify signatures." msgstr "" #: src/message.h:157 #, c-format msgid "Saving signature as %s failed. Maybe file already exists." msgstr "" #: src/message.h:160 #, c-format msgid "Failed to open ServerStat file %s for read." msgstr "" #: src/message.h:161 #, c-format msgid "ServerStat file %s loaded successfully." msgstr "" #: src/message.h:162 #, c-format msgid "Failed to read ServerStat from %s." msgstr "" #: src/message.h:165 #, c-format msgid "Failed to open ServerStat file %s for write." msgstr "" #: src/message.h:166 #, c-format msgid "ServerStat file %s saved successfully." msgstr "" #: src/message.h:167 #, c-format msgid "Failed to write ServerStat to %s." msgstr "" #: src/message.h:170 #, c-format msgid "Failed to establish connection, cause: %s" msgstr "" #: src/message.h:171 #, c-format msgid "Network problem has occurred. cause:%s" msgstr "" #: src/message.h:173 #, c-format msgid "Failed to load trusted CA certificates from %s. Cause: %s" msgstr "" #: src/message.h:175 #, c-format msgid "" "Certificate verification failed. Cause: %s See --ca-certificate and --check-" "certificate option." msgstr "" #: src/message.h:177 msgid "No certificate found." msgstr "" #: src/message.h:178 msgid "Hostname not match." msgstr "" #: src/message.h:179 msgid "No files to download." msgstr "Ningún archivo que descargar." #: src/message.h:181 msgid "" "You may encounter the certificate verification error with HTTPS server. See " "--ca-certificate and --check-certificate option." msgstr "" #: src/message.h:183 #, c-format msgid "Printing the contents of file '%s'..." msgstr "Imprimiendo los conteidos del archivo «%s»..." #: src/message.h:184 msgid "This file is neither Torrent nor Metalink file. Skipping." msgstr "Este archivo no es de tipo Torrent ni Metalink. Saltando." #: src/message.h:189 #, c-format msgid "Is '%s' a file?" msgstr "" #: src/message.h:190 #, c-format msgid "Failed to find given interface %s, cause: %s" msgstr "" #: src/message.h:192 #, c-format msgid "Saved metadata as %s." msgstr "" #: src/message.h:193 #, c-format msgid "Saving metadata as %s failed. Maybe file already exists." msgstr "" #: src/message.h:195 #, c-format msgid "Detected directory traversal directive in %s" msgstr "" #: src/message.h:199 msgid "Timeout." msgstr "Ha expirado el tiempo de espera." #: src/message.h:200 msgid "Invalid chunk size." msgstr "Tamaño del trozo invalido" #: src/message.h:201 #, c-format msgid "Too large chunk. size=%d" msgstr "Medida del trozo demasiado larga. Medida=%d" #: src/message.h:202 msgid "Invalid header." msgstr "Cabecera incorrecta." #: src/message.h:203 msgid "Invalid response." msgstr "Respuesta incorrecta." #: src/message.h:204 msgid "No header found." msgstr "No se ha encontrado la cabecera." #: src/message.h:205 msgid "No status header." msgstr "No hay cabecera de estado." #: src/message.h:206 msgid "Proxy connection failed." msgstr "Ha fallado la conexión con el proxy." #: src/message.h:207 msgid "Connection failed." msgstr "Ha fallado la conexión." #: src/message.h:208 #, c-format msgid "" "The requested filename and the previously registered one are not same. " "Expected:%s Actual:%s" msgstr "" "El nombre del fichero pedido y el anotado previamente no son el mismo. " "Esperábamos:%s Actual:%s" #: src/message.h:209 #, c-format msgid "The response status is not successful. status=%d" msgstr "El estado de la respuesta no es satisfactorio. estado=%d" #: src/message.h:210 #, c-format msgid "Too large file size. size=%s" msgstr "Medida del fichero demasiado larga. medida=%s" #: src/message.h:211 #, c-format msgid "Transfer encoding %s is not supported." msgstr "No està soportada la codificación %s de la transferencia." #: src/message.h:212 #, c-format msgid "SSL initialization failed: %s" msgstr "Ha fallado la inicialización SSL: %s" #: src/message.h:213 msgid "SSL I/O error" msgstr "Error de E/S SSL" #: src/message.h:214 msgid "SSL protocol error" msgstr "Error de protocolo SSL" #: src/message.h:215 #, c-format msgid "SSL unknown error %d" msgstr "Error SSL desconocido %d" #: src/message.h:216 #, c-format msgid "SSL initialization failed: OpenSSL connect error %d" msgstr "Ha fallado la inicialización SSL: error de conexión OpenSSL %d" #: src/message.h:217 #, c-format msgid "Size mismatch Expected:%s Actual:%s" msgstr "Medida incorrecta, Esperada:%s Actual:%s" #: src/message.h:218 msgid "Authorization failed." msgstr "Ha fallado la autorización." #: src/message.h:219 msgid "Got EOF from the server." msgstr "Recibido EOF desde el servidor." #: src/message.h:220 msgid "Got EOF from peer." msgstr "Recibido EOF desde el igual." #: src/message.h:221 msgid "Malformed meta info." msgstr "meta info mal formada." #: src/message.h:223 #, c-format msgid "Failed to open the file %s, cause: %s" msgstr "Fallo al abrir el fichero %s, causa: %s" #: src/message.h:224 #, c-format msgid "Failed to write into the file %s, cause: %s" msgstr "Fallo al escribir en el fichero %s, causa: %s" #: src/message.h:225 #, c-format msgid "Failed to read from the file %s, cause: %s" msgstr "Fallo al leer del fichero %s, causa: %s" #: src/message.h:226 msgid "Failed to read data from disk." msgstr "Fallo al leer datos del disco." #: src/message.h:227 #, c-format msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s" msgstr "" "Fallo al calcular resumen SHA1 de o de una parte del fichero %s, causa: %s" #: src/message.h:228 #, c-format msgid "Failed to seek the file %s, cause: %s" msgstr "Fallo al buscar en el fichero %s, causa: %s" #: src/message.h:229 #, c-format msgid "The offset is out of range, offset=%s" msgstr "La desviación está fuera de límites, desviación=%s" #: src/message.h:230 #, c-format msgid "%s is not a directory." msgstr "%s no es un directorio." #: src/message.h:231 #, c-format msgid "Failed to make the directory %s, cause: %s" msgstr "Fallo al crear el directorio %s, causa: %s" #: src/message.h:235 #, c-format msgid "Failed to open a socket, cause: %s" msgstr "Fallo al abrir un zócalo, causa: %s" #: src/message.h:236 #, c-format msgid "Failed to set a socket option, cause: %s" msgstr "Fallo al poner una opción del zócalo, causa: %s" #: src/message.h:237 #, c-format msgid "Failed to set a socket as blocking, cause: %s" msgstr "Fallo al poner un zócalo como bloqueante, causa: %s" #: src/message.h:238 #, c-format msgid "Failed to set a socket as non-blocking, cause: %s" msgstr "Fallo al poner un zócalo como no-bloqueante, causa: %s" #: src/message.h:239 #, c-format msgid "Failed to bind a socket, cause: %s" msgstr "Fallo al conectar un zócalo, causa: %s" #: src/message.h:240 #, c-format msgid "Failed to listen to a socket, cause: %s" msgstr "Fallo escuchando un zócalo, causa: %s" #: src/message.h:241 #, c-format msgid "Failed to accept a peer connection, cause: %s" msgstr "Fallo al aceptar una conexión de igual, causa: %s" #: src/message.h:242 #, c-format msgid "Failed to get the name of socket, cause: %s" msgstr "Fallo al coger el nombre del zócalo, causa: %s" #: src/message.h:243 #, c-format msgid "Failed to get the name of connected peer, cause: %s" msgstr "Fallo al coger el nombre de un igual conectado, causa: %s" #: src/message.h:244 #, c-format msgid "Failed to resolve the hostname %s, cause: %s" msgstr "Fallo al resolver el nombre de host %s,causa: %s" #: src/message.h:245 #, c-format msgid "Failed to connect to the host %s, cause: %s" msgstr "Fallo al conectar al host %s, causa: %s" #: src/message.h:246 #, c-format msgid "Failed to check whether the socket is writable, cause: %s" msgstr "Fallo al comprobar si se puede escribir en un zócalo, causa: %s" #: src/message.h:247 #, c-format msgid "Failed to check whether the socket is readable, cause: %s" msgstr "Fallo al comprovar si se puede leer un zócalo, causa: %s" #: src/message.h:248 #, c-format msgid "Failed to send data, cause: %s" msgstr "Fallo al enviar datos, causa: %s" #: src/message.h:249 #, c-format msgid "Failed to receive data, cause: %s" msgstr "Fallo al recibir datos, causa: %s" #: src/message.h:250 #, c-format msgid "Failed to peek data, cause: %s" msgstr "Fallo al revisar datos, causa: %s" #: src/message.h:251 #, c-format msgid "Unknown socket error %d (0x%x)" msgstr "Error desconocido de zócalo %d (0x%x)" #: src/message.h:252 #, c-format msgid "File %s exists, but %s does not exist." msgstr "fichero %s existe, pero %s no existe." #: src/message.h:254 #, c-format msgid "Invalid payload size for %s, size=%lu. It should be %lu." msgstr "" #: src/message.h:255 #, c-format msgid "Invalid ID=%d for %s. It should be %d." msgstr "Incorrecto ID=%d para %s. Ha de ser %d." #: src/message.h:256 #, c-format msgid "" "Chunk checksum validation failed. checksumIndex=%lu, offset=%s, expectedHash=" "%s, actualHash=%s" msgstr "" #: src/message.h:257 msgid "Download aborted." msgstr "Descarga abortada." #: src/message.h:258 #, c-format msgid "File %s is being downloaded by other command." msgstr "El fichero %s està siendo descargado por otra orden." #: src/message.h:259 msgid "Insufficient checksums." msgstr "No hay bastantes sumas de comprobación." #: src/message.h:260 #, c-format msgid "Tracker returned failure reason: %s" msgstr "El Seguidor ha devuelto fallo. razón: %s" #: src/message.h:261 msgid "Flooding detected." msgstr "Detectado sobrepasamiento." #: src/message.h:263 #, c-format msgid "" "Drop connection because no request/piece messages were exchanged in a " "certain period(%ld seconds)." msgstr "" #: src/message.h:265 msgid "The infoHash in torrent file doesn't match to one in .aria2 file." msgstr "" "El infoHash en el fichero torrent no concuerda con el del fichero .aria2." #: src/message.h:266 #, c-format msgid "No such file entry %s" msgstr "No hay esta entrada en el fichero %s" #: src/message.h:267 #, c-format msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s" msgstr "Velocidad de descarga demasiado lenta: %d <= %d(B/s), host:%s" #: src/message.h:268 msgid "No HttpRequestEntry found." msgstr "No hemos encontrado HttpRequestEntry." #: src/message.h:269 #, c-format msgid "Got %d status, but no location header provided." msgstr "Hemos recibido estado %d, pero no nos da la cabecera de ubicación." #: src/message.h:270 #, c-format msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s" msgstr "Cabecera de rango incorrecta. Petición: %s-%s/%s, Respuesta: %s-%s/%s" #: src/message.h:271 msgid "No file matched with your preference." msgstr "No hay ningún fichero que concuerde con vuestra preferencia." #: src/message.h:272 msgid "Exception caught" msgstr "Excepcion capturada" #: src/message.h:273 #, c-format msgid "Max payload length exceeded or invalid. length = %u" msgstr "Longitud de carga ulti excedida o es invalida, longitud = %u" #: src/message.h:274 #, c-format msgid "Invalid file length. Cannot continue download %s: local %s, remote %s" msgstr "" "Longitud de fichero incorrecta. No se puede continuar la descarga %s: local " "%s, remoto %s" #: src/BtSetup.cc:212 msgid "Errors occurred while binding port.\n" msgstr "Han ocurrido errores mientras cogíamos el puerto.\n" #~ msgid "must be a number." #~ msgstr "ha de ser un número." #~ msgid "must be between %.1f and %.1f." #~ msgstr "ha de estar entre %.1f y %.1f." #~ msgid "must be greater than or equal to %.1f." #~ msgstr "ha de ser mayor o igual que %.1f." #~ msgid "must be one of the following:" #~ msgstr "ha de ser uno de los siguientes:" #~ msgid "unrecognized proxy format" #~ msgstr "formato proxy no reconocido" #~ msgid "CUID#%d - Connecting to %s:%d" #~ msgstr "CUID#%d - Conectando a %s:%d" #~ msgid "CUID#%d - Redirecting to %s" #~ msgstr "CUID#%d - Redirigiendo hacia %s" #~ msgid "" #~ "CUID#%d - Requesting:\n" #~ "%s" #~ msgstr "" #~ "CUID#%d - Pidiendo:\n" #~ "%s" #~ msgid "" #~ "CUID#%d - Response received:\n" #~ "%s" #~ msgstr "" #~ "CUID#%d - Respuesta recibida:\n" #~ "%s" #~ msgid "CUID#%d - Download aborted. URI=%s" #~ msgstr "CUID#%d - Descarga cancelada. URI=%s" #~ msgid "CUID#%d - Restarting the download. URI=%s" #~ msgstr "CUID#%d - Re-arrancando la descarga. URI=%s" #~ msgid "CUID#%d - Download aborted." #~ msgstr "CUID#%d - Descarga cancelada." #~ msgid "CUID#%d - %d times attempted, but no success. Download aborted." #~ msgstr "CUID#%d - Intentado %d veces, pero sin éxito. Descarga cancelada." #~ msgid "CUID#%d - Unregistering cuid from segmentManager." #~ msgstr "CUID#%d - Des-registrando cuid en el Gestor de segmentos." #~ msgid "CUID#%d - we got new piece. index=%d" #~ msgstr "CUID#%d - tenemos una nueva pieza. índice=%d" #~ msgid "CUID#%d - we got wrong piece. index=%d" #~ msgstr "CUID#%d - hemos cogido una pieza mala. índice=%d" #~ msgid "CUID#%d - Download not complete: %s" #~ msgstr "CUID#%d - Descarga incompleta: %s" #~ msgid "#%d - Download has already completed: %s" #~ msgstr "#%d - Ya se ha completado la descarga: %s" #~ msgid "CUID#%d - Good checksum: %s" #~ msgstr "CUID#%d - Suma de comprobación correcta: %s" #~ msgid "CUID#%d - Bad checksum: %s" #~ msgstr "CUID#%d - Suma de comprobación incorrecta: %s" #~ msgid "CUID#%d - Resolving hostname %s" #~ msgstr "CUID#%d - Resolviendo nombre del host %s" #~ msgid "CUID#%d - Name resolution complete: %s -> %s" #~ msgstr "CUID#%d - Resolución del nombre completada: %s -> %s" #~ msgid "CUID#%d - Name resolution for %s failed:%s" #~ msgstr "CUID#%d - La resolución del nombre para %s ha fallado:%s" #~ msgid "CUID#%d - DNS cache hit: %s -> %s" #~ msgstr "CUID#%d - Acertado el caché DNS: %s -> %s" #~ msgid "CUID#%d - Abort requested." #~ msgstr "CUID#%d - Cancelación requerida." #~ msgid "CUID#%d - Connecting to the peer %s" #~ msgstr "CUID#%d - Conectando al igual %s" #~ msgid "" #~ "CUID#%d - Piece received. index=%d, begin=%d, length=%d, offset=%llu, " #~ "blockIndex=%d" #~ msgstr "" #~ "CUID#%d - pieza recibida. índice=%d, inicio=%d, longitud=%d, desviación=" #~ "%llu, Indice-bloque=%d" #~ msgid "CUID#%d - Piece bitfield %s" #~ msgstr "CUID#%d - Campo de bits de la pieza %s" #~ msgid "" #~ "CUID#%d - Reject piece message in queue because the peer has been choked. " #~ "index=%d, begin=%d, length=%d" #~ msgstr "" #~ "CUID#%d - Mensaje de rechazo de la pieza en cola debido a que el igual ha " #~ "estado estrangulado. índice=%d, inicio=%d, longitud=%d" #~ msgid "" #~ "CUID#%d - Reject piece message in queue because cancel message received. " #~ "index=%d, begin=%d, length=%d" #~ msgstr "" #~ "CUID#%d - Mensaje de rechazo de la pieza en cola debido a que se ha " #~ "recibido un mensaje de cancelación. índice=%d, inicio=%d, longitud=%d" #~ msgid "CUID#%d - Exception caught while validating file integrity." #~ msgstr "" #~ "CUID#%d - Hemos encontrado una excepción mientras validábamos la " #~ "integridad del fichero." #~ msgid "CUID#%d - Interested in the peer" #~ msgstr "CUID#%d - Interesado en el igual" #~ msgid "CUID#%d - Not interested in the peer" #~ msgstr "CUID#%d - No interesado en el igual" #~ msgid "CUID#%d - Deleting request slot index=%d, blockIndex=%d" #~ msgstr "" #~ "CUID#%d - Borrando petición en el eslot. índice=%d, índice-bloque=%d" #~ msgid "" #~ "CUID#%d - Deleting request slot index=%d, blockIndex=%d because localhost " #~ "got choked." #~ msgstr "" #~ "CUID#%d - Borrando petición en el eslot. índice=%d, bloque-índice=%d " #~ "debido a que el localhost ha estado estrangulado." #~ msgid "CUID#%d - Deleting request slot blockIndex=%d because of time out" #~ msgstr "" #~ "CUID#%d - Borrando petición en el eslot. bloque-índice=%d debido a tiempo " #~ "excedido" #~ msgid "" #~ "CUID#%d - Deleting request slot blockIndex=%d because the block has been " #~ "acquired." #~ msgstr "" #~ "CUID#%d - Borrando petición en el eslot. bloque-índice=%d debido a que el " #~ "bloque ha sido recibido." #~ msgid "CUID#%d - Fast extension enabled." #~ msgstr "CUID#%d - Extensión ràpida activada." #~ msgid "CUID#%d - Exception caught while allocating file space." #~ msgstr "" #~ "CUID#%d - Hemos encontrado una excepción mientras reservábamos espacio " #~ "para el fichero." #~ msgid "CUID#%d - Content-Disposition detected. Use %s as filename" #~ msgstr "" #~ "CUID#%d - Hemos detectado Content-Disposition. Usaremos %s como nombre de " #~ "fichero" #~ msgid "CUID#%d - Peer %s:%d banned." #~ msgstr "CUID#%d - Igual %s:%d vetado." #~ msgid "CUID#%d - Using port %d for accepting new connections" #~ msgstr "CUID#%d - Usamos el puerto %d para aceptar nuevas conexiones" #~ msgid "CUID#%d - An error occurred while binding port=%d" #~ msgstr "CUID#%d - Ha ocurrido un error mientras tomábamos el puerto=%d" #~ msgid "CUID#%d - Incoming connection, adding new command CUID#%d" #~ msgstr "CUID#%d - Conexión entrante, añadiendo nueva orden CUID#%d" #~ msgid "CUID#%d - Error in accepting connection" #~ msgstr "CUID#%d - Error acceptando conexión" #~ msgid "CUID#%d - Error occurred while processing tracker response." #~ msgstr "" #~ "CUID#%d - Ha ocurrido un error mientras procesábamos la respuesta del " #~ "seguidor." #~ msgid "CUID#%d - Cannot create tracker request." #~ msgstr "CUID#%d - No se puede crear la petición en el seguidor." #~ msgid "CUID#%d - Creating new tracker request command #%d" #~ msgstr "CUID#%d - Creando una nueva orden de petición al seguidor #%d" #~ msgid "Removed %d have entries." #~ msgstr "Borrado %d tiene entradas." #~ msgid "%d seconds to allocate %s byte(s)" #~ msgstr "%d segundos para reservar %s byte(s)" #~ msgid "Dispatching FileAllocationCommand for CUID#%d." #~ msgstr "Ejecutando Orden de Reservar Fichero para CUID#%d." #~ msgid "Invalid payload size for %s, size=%d. It should be %d." #~ msgstr "" #~ "La Medida de carga útil (payload) es incorrecta para %s, medida=%d. Ha de " #~ "ser %d." #~ msgid "" #~ "Chunk checksum validation failed. checksumIndex=%d, offset=%s, " #~ "expectedHash=%s, actualHash=%s" #~ msgstr "" #~ "Ha fallado la validación de la suma de comprobación del trozo. " #~ "índiceSumacomprobación=%d, desviación=%s, HashEsperado=%s, HashActual=%s" #~ msgid "" #~ "Drop connection because no request/piece messages were exchanged in a " #~ "certain period(%d seconds)." #~ msgstr "" #~ "Liberamos la conexión debido a que no hemos intercambiado mensajes de " #~ "peticiones o piezas en el periodo establecido (%d seg.)." #~ msgid "Files:" #~ msgstr "Ficheros:" #~ msgid "" #~ " -c, --continue Continue downloading a partially " #~ "downloaded\n" #~ " file. Use this option to resume a download\n" #~ " started by a web browser or another " #~ "program\n" #~ " which downloads files sequentially from " #~ "the\n" #~ " beginning. Currently this option is only\n" #~ " applicable to http(s)/ftp downloads." #~ msgstr "" #~ " -c, --continue Continua descargando un fichero " #~ "parcialmente descargado.\n" #~ " Usen esta opción para seguir la descarga\n" #~ " comenzada por un navegador Web o otro " #~ "programa\n" #~ " que descarga los ficheros secuencialmente " #~ "desde el\n" #~ " principio. esta opción solamente es\n" #~ " aplicable a descargas http(s)/ftp." #~ msgid " -n, --no-netrc Disables netrc support." #~ msgstr " -n, --no-netrc Desactiva el soporte netrc." #~ msgid "" #~ " -S, --show-files Print file listing of .torrent or .metalink " #~ "file\n" #~ " and exit. More detailed information will be " #~ "listed\n" #~ " in case of torrent file." #~ msgstr "" #~ " -S, --show-files Escribe el listado de ficheros de un " #~ "fichero .torrent o .metalink\n" #~ " y sale. Se listará información más " #~ "detallada\n" #~ " en el caso de un fichero torrent." #~ msgid "" #~ " -M, --metalink-file=METALINK_FILE The file path to the .metalink file." #~ msgstr " -M, --metalink-file=METALINK_FILE El camino al fichero .metalink." #~ msgid "" #~ " You can specify multiple URLs. Unless you specify -Z option, all URLs " #~ "must\n" #~ " point to the same file or downloading will fail." #~ msgstr "" #~ " Se pueden poner varias URLs. A menos que se especifique la opción -Z, " #~ "todas las URLs han\n" #~ " de apuntar al mismo fichero o la descarga fallará." #~ msgid "" #~ " You can specify both torrent file with -T option and URLs. By doing " #~ "this,\n" #~ " download a file from both torrent swarm and http/ftp server at the same " #~ "time,\n" #~ " while the data from http/ftp are uploaded to the torrent swarm. Note " #~ "that\n" #~ " only single file torrent can be integrated with http/ftp." #~ msgstr "" #~ " Se puede poner tanto un fichero torrent con la opción -T y URLs. Así,\n" #~ " descargamos un fichero desde el enjambre Torrent y el servidor http/ftp " #~ "al mismo tiempo,\n" #~ " mientras las datos provinentes de http/ftp son subidos al enjambre " #~ "torrent. Observen que\n" #~ " solamente se puede integrar un único fichero con http/ftp." #~ msgid "" #~ "CUID#%d - The segment changed. We send the request again with new Range " #~ "header." #~ msgstr "" #~ "CUID#%d - El segmento ha cambiado. Enviaremos la petición otra vez con " #~ "una nueva cabecera de intervalo." #~ msgid "CUID#%d cancels segment index=%d. CUID#%d handles it instead." #~ msgstr "" #~ "CUID#%d cancela el segmento índice=%d. El CUID#%d lo gestionará ahora." #~ msgid "CUID#%d - The download for one segment completed successfully." #~ msgstr "" #~ "CUID#%d - Se ha completado satisfactoriamente la descarga de un segmento." #~ msgid "CUID#%d - No segment available." #~ msgstr "CUID#%d - No hay segmentos disponibles." #~ msgid "Failed to open the segment file %s, cause: %s" #~ msgstr "Fallo al abrir el fichero de segmentos %s, causa: %s" #~ msgid "Failed to write into the segment file %s, cause: %s" #~ msgstr "Fallo al escribir en el fichero de segmentos %s, causa: %s" #~ msgid "Failed to read from the segment file %s, cause: %s" #~ msgstr "Fallo al leer del fichero de segmentos %s, causa: %s" #~ msgid "CUID#%d - Extended Messaging enabled." #~ msgstr "" #~ "Copy text \t\n" #~ "CUID#%d - Mensajes extendidos activados." #~ msgid "%d second(s) has passed. Stopping application." #~ msgstr "pasaron %d segundos. Deteniendo la aplicacion." #~ msgid " --enable-dht[=true|false] Enable DHT functionality." #~ msgstr " --enable-dht[=true|false] Habilitar funcionanlidad DHT." #~ msgid "must be smaller than or equal to %s." #~ msgstr "ha de ser menor o igual que %s." #~ msgid "must be between %s and %s." #~ msgstr "ha de estar entre %s y %s." #~ msgid "must be smaller than or equal to %.1f." #~ msgstr "ha de ser menor o igual que %.1f." #~ msgid "must be greater than or equal to %s." #~ msgstr "ha de ser mayor o igual que %s." #~ msgid " -D, --daemon Run as daemon." #~ msgstr " -D, --daemon Ejecutar como demonio." #~ msgid "" #~ " --retry-wait=SEC Set the seconds to wait to retry after an " #~ "error\n" #~ " has occured." #~ msgstr "" #~ " --retry-wait=SEG Establecer los segundos para el siguiente \n" #~ " intento tras un error." #~ msgid "" #~ " --http-proxy=PROXY Use this proxy server for HTTP.\n" #~ " See also --all-proxy option.\n" #~ " This affects all URLs." #~ msgstr "" #~ " --http-proxy=PROXY Usar este servidor proxy para HTTP.\n" #~ " Vea también la opción --all-proxy.\n" #~ " Afecta a todas las URL." #~ msgid "" #~ " -s, --split=N Download a file using N connections. If " #~ "more\n" #~ " than N URLs are given, first N URLs are " #~ "used and\n" #~ " remaining URLs are used for backup. If less " #~ "than\n" #~ " N URLs are given, those URLs are used more " #~ "than\n" #~ " once so that N connections total are made\n" #~ " simultaneously. Please see -j option too.\n" #~ " Please note that in Metalink download, " #~ "this\n" #~ " option has no effect and use -C option " #~ "instead." #~ msgstr "" #~ " -s, --split=N Descargar un archivo usando N conexiones. " #~ "Si\n" #~ " hay más de N URL, se usarán las N primeras " #~ "para\n" #~ " descargar y el resto como respaldo. Si hay " #~ "menos \n" #~ " de N, se usarán algunas URL más de una vez " #~ "para\n" #~ " que haya un total de N conexiones " #~ "simultáneas. \n" #~ " Vea también la opción -j. Tenga en cuenta " #~ "que \n" #~ " esta opción no funciona para descargas " #~ "Metalink, \n" #~ " donde se usa la opción -C en su lugar." #~ msgid "" #~ " --https-proxy=PROXY Use this proxy server for HTTPS.\n" #~ " See also --all-proxy option.\n" #~ " This affects all URLs." #~ msgstr "" #~ " --https-proxy=PROXY Usar este servidor proxy para HTTPS.\n" #~ " Vea también la opción --all-proxy.\n" #~ " Afecta a todas las URL." #~ msgid "" #~ " --ftp-proxy=PROXY Use this proxy server for FTP.\n" #~ " See also --all-proxy option.\n" #~ " This affects all URLs." #~ msgstr "" #~ " --ftp-proxy=PROXY Usar este servidor proxy para FTP.\n" #~ " Vea también la opción --all-proxy.\n" #~ " Afecta a todas las URL." #~ msgid " -o, --out=FILE The file name of the downloaded file." #~ msgstr " -o, --out=ARCHIVO El nombre del archivo descargado." #~ msgid "must be either 'true' or 'false'." #~ msgstr "ha de ser «true» (verdadero) o «false» (falso)"