/* */ #define TEXT_DIR \ _(" -d, --dir=DIR The directory to store the downloaded file.") #define TEXT_OUT \ _(" -o, --out=FILE The file name of the downloaded file.") #define TEXT_LOG \ _(" -l, --log=LOG The file name of the log file. If '-' is\n"\ " specified, log is written to stdout.") #define TEXT_DAEMON \ _(" -D, --daemon Run as daemon. The current working directory will\n"\ " be changed to \"/\" and standard input, standard\n"\ " output and standard error will be redirected to\n"\ " \"/dev/null\".") #define TEXT_SPLIT \ _(" -s, --split=N Download a file using N connections. If more\n"\ " than N URLs are given, first N URLs are used and\n"\ " remaining URLs are used for backup. If less than\n"\ " N URLs are given, those URLs are used more than\n"\ " once so that N connections total are made\n"\ " simultaneously. Please see -j option too.\n"\ " Please note that in Metalink download, this\n"\ " option has no effect and use -C option instead.") #define TEXT_RETRY_WAIT \ _(" --retry-wait=SEC Set the seconds to wait to retry after an error\n"\ " has occured.") #define TEXT_TIMEOUT \ _(" -t, --timeout=SEC Set timeout in seconds.") #define TEXT_MAX_TRIES \ _(" -m, --max-tries=N Set number of tries. 0 means unlimited.") #define TEXT_HTTP_PROXY \ _(" --http-proxy=PROXY Use this proxy server for HTTP.\n"\ " See also --all-proxy option.\n"\ " This affects all URLs.") #define TEXT_HTTPS_PROXY \ _(" --https-proxy=PROXY Use this proxy server for HTTPS.\n"\ " See also --all-proxy option.\n"\ " This affects all URLs.") #define TEXT_FTP_PROXY \ _(" --ftp-proxy=PROXY Use this proxy server for FTP.\n"\ " See also --all-proxy option.\n"\ " This affects all URLs.") #define TEXT_ALL_PROXY \ _(" --all-proxy=PROXY Use this proxy server for all protocols.\n"\ " You can override this setting and specify a\n"\ " proxy server for a particular protocol using\n"\ " --http-proxy, --https-proxy and --ftp-proxy\n"\ " options.\n"\ " This affects all URLs.") #define TEXT_HTTP_USER \ _(" --http-user=USER Set HTTP user. This affects all URLs.") #define TEXT_HTTP_PASSWD \ _(" --http-passwd=PASSWD Set HTTP password. This affects all URLs.") #define TEXT_PROXY_METHOD \ _(" --proxy-method=METHOD Set the method to use in proxy request.") #define TEXT_HTTP_AUTH_SCHEME \ _(" --http-auth-scheme=SCHEME Set HTTP authentication scheme. Currently, basic\n"\ " is the only supported scheme.") #define TEXT_REFERER \ _(" --referer=REFERER Set Referer. This affects all URLs.") #define TEXT_FTP_USER \ _(" --ftp-user=USER Set FTP user. This affects all URLs.") #define TEXT_FTP_PASSWD \ _(" --ftp-passwd=PASSWD Set FTP password. This affects all URLs.") #define TEXT_FTP_TYPE \ _(" --ftp-type=TYPE Set FTP transfer type.") #define TEXT_FTP_PASV \ _(" -p, --ftp-pasv[=true|false] Use the passive mode in FTP. If false is given,\n"\ " the active mode will be used.") #define TEXT_LOWEST_SPEED_LIMIT \ _(" --lowest-speed-limit=SPEED Close connection if download speed is lower than\n"\ " or equal to this value(bytes per sec).\n"\ " 0 means aria2 does not have a lowest speed limit.\n"\ " You can append K or M(1K = 1024, 1M = 1024K).\n"\ " This option does not affect BitTorrent downloads.") #define TEXT_MAX_OVERALL_DOWNLOAD_LIMIT \ _(" --max-overall-download-limit=SPEED Set max overall download speed in bytes/sec.\n"\ " 0 means unrestricted.\n"\ " You can append K or M(1K = 1024, 1M = 1024K).\n"\ " To limit the download speed per download, use\n"\ " --max-download-limit option.") #define TEXT_MAX_DOWNLOAD_LIMIT \ _(" --max-download-limit=SPEED Set max download speed per each download in\n"\ " bytes/sec. 0 means unrestricted.\n"\ " You can append K or M(1K = 1024, 1M = 1024K).\n"\ " To limit the overall download speed, use\n"\ " --max-overall-download-limit option.") #define TEXT_FILE_ALLOCATION \ _(" --file-allocation=METHOD Specify file allocation method.\n"\ " 'none' doesn't pre-allocate file space. 'prealloc'\n"\ " pre-allocates file space before download begins.\n"\ " This may take some time depending on the size of\n"\ " the file.\n"\ " If you are using newer file systems such as ext4\n"\ " (with extents support), btrfs or xfs, 'falloc' is\n"\ " your best choice. It allocates large(few GiB)\n"\ " files almost instantly. Don't use 'falloc' with\n"\ " legacy file systems such as ext3 because it takes\n"\ " almost same time as 'prealloc' and it blocks aria2\n"\ " entirely until allocation finishes. 'falloc' may\n"\ " not be available if your system doesn't have\n"\ " posix_fallocate() function.") #define TEXT_NO_FILE_ALLOCATION_LIMIT \ _(" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"\ " size is smaller than SIZE.\n"\ " You can append K or M(1K = 1024, 1M = 1024K).") # define TEXT_ENABLE_DIRECT_IO \ _(" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage while\n"\ " allocating files.\n"\ " Turn off if you encounter any error") #define TEXT_ALLOW_OVERWRITE \ _(" --allow-overwrite=true|false If false is given, and a file already exists but\n"\ " the corresponding control file (filename.aria2)\n"\ " doesn't exist, then aria2 will not re-download\n"\ " the file. See also --auto-file-renaming option.") #define TEXT_ALLOW_PIECE_LENGTH_CHANGE \ _(" --allow-piece-length-change=true|false If false is given, aria2 aborts download\n"\ " when a piece length is different from one in\n"\ " a control file. If true is given, you can proceed\n"\ " but some download progress will be lost.") #define TEXT_FORCE_SEQUENTIAL \ _(" -Z, --force-sequential[=true|false] Fetch URIs in the command-line sequentially\n"\ " and download each URI in a separate session, like\n"\ " the usual command-line download utilities.") #define TEXT_AUTO_FILE_RENAMING \ _(" --auto-file-renaming[=true|false] Rename file name if the same file already\n"\ " exists. This option works only in http(s)/ftp\n"\ " download.\n"\ " The new file name has a dot and a number(1..9999)\n"\ " appended.") #define TEXT_PARAMETERIZED_URI \ _(" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"\ " You can specify set of parts:\n"\ " http://{sv1,sv2,sv3}/foo.iso\n"\ " Also you can specify numeric sequences with step\n"\ " counter:\n"\ " http://host/image[000-100:2].img\n"\ " A step counter can be omitted.\n"\ " If all URIs do not point to the same file, such\n"\ " as the second example above, -Z option is\n"\ " required.") #define TEXT_ENABLE_HTTP_KEEP_ALIVE \ _(" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection.") #define TEXT_ENABLE_HTTP_PIPELINING \ _(" --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining.") #define TEXT_CHECK_INTEGRITY \ _(" -V, --check-integrity[=true|false] Check file integrity by validating piece\n"\ " hashes. This option has effect only in BitTorrent\n"\ " and Metalink downloads with chunk checksums.\n"\ " Use this option to re-download a damaged portion\n"\ " of a file. See also --bt-hash-check-seed option.") #define TEXT_BT_HASH_CHECK_SEED \ _(" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n"\ " --check-integrity option and file is complete,\n"\ " continue to seed file. If you want to check file\n"\ " and download it only when it is damaged or\n"\ " incomplete, set this option to false.\n"\ " This option has effect only on BitTorrent\n"\ " download.") #define TEXT_REALTIME_CHUNK_CHECKSUM \ _(" --realtime-chunk-checksum=true|false Validate chunk of data by calculating\n"\ " checksum while downloading a file if chunk\n"\ " checksums are provided.") #define TEXT_CONTINUE \ _(" -c, --continue Continue downloading a partially downloaded\n"\ " file. Use this option to resume a download\n"\ " started by a web browser or another program\n"\ " which downloads files sequentially from the\n"\ " beginning. Currently this option is only\n"\ " applicable to http(s)/ftp downloads.") #define TEXT_USER_AGENT \ _(" -U, --user-agent=USER_AGENT Set user agent for http(s) downloads.") #define TEXT_NO_NETRC \ _(" -n, --no-netrc Disables netrc support.") #define TEXT_INPUT_FILE \ _(" -i, --input-file=FILE Downloads URIs found in FILE. You can specify\n"\ " multiple URIs for a single entity: separate\n"\ " URIs on a single line using the TAB character.\n"\ " Reads input from stdin when '-' is specified.\n"\ " The additional out and dir options can be\n"\ " specified after each line of URIs. This optional\n"\ " line must start with white space(s). See INPUT\n"\ " FILE section of man page for details.") #define TEXT_MAX_CONCURRENT_DOWNLOADS \ _(" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads for\n"\ " every static (HTTP/FTP) URL, torrent and metalink.\n"\ " See also -s and -C options.") #define TEXT_LOAD_COOKIES \ _(" --load-cookies=FILE Load Cookies from FILE using the Firefox3 format\n"\ " and Mozilla/Firefox(1.x/2.x)/Netscape format.") #define TEXT_SAVE_COOKIES \ _(" --save-cookies=FILE Save Cookies to FILE in Mozilla/Firefox(1.x/2.x)/\n"\ " Netscape format. If FILE already exists, it is\n"\ " overwritten. Session Cookies are also saved and\n"\ " their expiry values are treated as 0.") #define TEXT_SHOW_FILES \ _(" -S, --show-files Print file listing of .torrent or .metalink file\n"\ " and exit. More detailed information will be listed\n"\ " in case of torrent file.") #define TEXT_SELECT_FILE \ _(" --select-file=INDEX... Set file to download by specifying its index.\n"\ " You can find the file index using the\n"\ " --show-files option. Multiple indexes can be\n"\ " specified by using ',', for example: \"3,6\".\n"\ " You can also use '-' to specify a range: \"1-5\".\n"\ " ',' and '-' can be used together.\n"\ " When used with the -M option, index may vary\n"\ " depending on the query(see --metalink-* options).") #define TEXT_TORRENT_FILE \ _(" -T, --torrent-file=TORRENT_FILE The path to the .torrent file.") #define TEXT_FOLLOW_TORRENT \ _(" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"\ " whose suffix is .torrent or content type is\n"\ " application/x-bittorrent is downloaded, aria2\n"\ " parses it as a torrent file and downloads files\n"\ " mentioned in it.\n"\ " If mem is specified, a torrent file is not\n"\ " written to the disk, but is just kept in memory.\n"\ " If false is specified, the action mentioned above\n"\ " is not taken.") #define TEXT_DIRECT_FILE_MAPPING \ _(" --direct-file-mapping=true|false Directly read from and write to each file\n"\ " mentioned in .torrent file.") #define TEXT_LISTEN_PORT \ _(" --listen-port=PORT... Set TCP port number for BitTorrent downloads.\n"\ " Multiple ports can be specified by using ',',\n"\ " for example: \"6881,6885\". You can also use '-'\n"\ " to specify a range: \"6881-6999\". ',' and '-' can\n"\ " be used together.") #define TEXT_MAX_OVERALL_UPLOAD_LIMIT \ _(" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/sec.\n"\ " 0 means unrestricted.\n"\ " You can append K or M(1K = 1024, 1M = 1024K).\n"\ " To limit the upload speed per torrent, use\n"\ " --max-upload-limit option.") #define TEXT_MAX_UPLOAD_LIMIT \ _(" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n"\ " bytes/sec. 0 means unrestricted.\n"\ " You can append K or M(1K = 1024, 1M = 1024K).\n"\ " To limit the overall upload speed, use\n"\ " --max-overall-upload-limit option.") #define TEXT_SEED_TIME \ _(" --seed-time=MINUTES Specify seeding time in minutes. Also see the\n"\ " --seed-ratio option.") #define TEXT_SEED_RATIO \ _(" --seed-ratio=RATIO Specify share ratio. Seed completed torrents\n"\ " until share ratio reaches RATIO.\n"\ " You are strongly encouraged to specify equals or\n"\ " more than 1.0 here. Specify 0.0 if you intend to\n"\ " do seeding regardless of share ratio.\n" \ " If --seed-time option is specified along with\n"\ " this option, seeding ends when at least one of\n"\ " the conditions is satisfied.") #define TEXT_PEER_ID_PREFIX \ _(" --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID in\n"\ " BitTorrent is 20 byte length. If more than 20\n"\ " bytes are specified, only first 20\n"\ " bytes are used. If less than 20 bytes are\n"\ " specified, the random alphabet characters are\n"\ " added to make it's length 20 bytes.") #define TEXT_ENABLE_PEER_EXCHANGE \ _(" --enable-peer-exchange[=true|false] Enable Peer Exchange extension.") #define TEXT_ENABLE_DHT \ _(" --enable-dht[=true|false] Enable DHT functionality.") #define TEXT_DHT_LISTEN_PORT \ _(" --dht-listen-port=PORT... Set UDP listening port for DHT.\n"\ " Multiple ports can be specified by using ',',\n"\ " for example: \"6881,6885\". You can also use '-'\n"\ " to specify a range: \"6881-6999\". ',' and '-' can\n"\ " be used together.") #define TEXT_DHT_ENTRY_POINT \ _(" --dht-entry-point=HOST:PORT Set host and port as an entry point to DHT\n"\ " network.") #define TEXT_DHT_FILE_PATH \ _(" --dht-file-path=PATH Change the DHT routing table file to PATH.") #define TEXT_BT_MIN_CRYPTO_LEVEL \ _(" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"\ " If several encryption methods are provided by a\n"\ " peer, aria2 chooses the lowest one which satisfies\n"\ " the given level.") #define TEXT_BT_REQUIRE_CRYPTO \ _(" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"\ " establish connection with legacy BitTorrent\n"\ " handshake. Thus aria2 always uses Obfuscation\n"\ " handshake.") #define TEXT_BT_REQUEST_PEER_SPEED_LIMIT \ _(" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n"\ " torrent is lower than SPEED, aria2 temporarily\n"\ " increases the number of peers to try for more\n"\ " download speed. Configuring this option with your\n"\ " preferred download speed can increase your\n"\ " download speed in some cases.\n"\ " You can append K or M(1K = 1024, 1M = 1024K).") #define TEXT_BT_MAX_OPEN_FILES \ _(" --bt-max-open-files=NUM Specify maximum number of files to open in each\n"\ " BitTorrent download.") #define TEXT_BT_SEED_UNVERIFIED \ _(" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"\ " verifying piece hashes.") #define TEXT_BT_MAX_PEERS \ _(" --bt-max-peers=NUM Specify the maximum number of peers per torrent.\n"\ " 0 means unlimited.\n"\ " See also --bt-request-peer-speed-limit option.") #define TEXT_METALINK_FILE \ _(" -M, --metalink-file=METALINK_FILE The file path to the .metalink file.") #define TEXT_METALINK_SERVERS \ _(" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"\ " simultaneously. Some Metalinks regulate the\n"\ " number of servers to connect. aria2 strictly\n"\ " respects them. This means that if Metalink defines\n"\ " the maxconnections attribute lower than\n"\ " NUM_SERVERS, then aria2 uses the value of\n"\ " maxconnections attribute instead of NUM_SERVERS.\n"\ " See also -s and -j options.") #define TEXT_METALINK_VERSION \ _(" --metalink-version=VERSION The version of the file to download.") #define TEXT_METALINK_LANGUAGE \ _(" --metalink-language=LANGUAGE The language of the file to download.") #define TEXT_METALINK_OS \ _(" --metalink-os=OS The operating system of the file to download.") #define TEXT_METALINK_LOCATION \ _(" --metalink-location=LOCATION[,...] The location of the preferred server.\n"\ " A comma-delimited list of locations is\n"\ " acceptable.") #define TEXT_METALINK_PREFERRED_PROTOCOL \ _(" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify 'none'\n"\ " if you don't have any preferred protocol.") #define TEXT_FOLLOW_METALINK \ _(" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"\ " whose suffix is .metaink or content type of\n"\ " application/metalink+xml is downloaded, aria2\n"\ " parses it as a metalink file and downloads files\n"\ " mentioned in it.\n"\ " If mem is specified, a metalink file is not\n"\ " written to the disk, but is just kept in memory.\n"\ " If false is specified, the action mentioned above\n"\ " is not taken.") #define TEXT_METALINK_ENABLE_UNIQUE_PROTOCOL \ _(" --metalink-enable-unique-protocol=true|false If true is given and several\n"\ " protocols are available for a mirror in a metalink\n"\ " file, aria2 uses one of them.\n"\ " Use --metalink-preferred-protocol option to\n"\ " specify the preference of protocol.") #define TEXT_VERSION \ _(" -v, --version Print the version number and exit.") #define TEXT_HELP \ _(" -h, --help[=TAG|KEYWORD] Print usage and exit.\n"\ " The help messages are classified with tags. A tag\n"\ " starts with \"#\". For example, type \"--help=#http\"\n"\ " to get the usage for the options tagged with\n"\ " \"#http\". If non-tag word is given, print the usage\n"\ " for the options whose name includes that word.") #define TEXT_NO_CONF \ _(" --no-conf Disable loading aria2.conf file.") #define TEXT_CONF_PATH \ _(" --conf-path=PATH Change the configuration file path to PATH.") #define TEXT_STOP \ _(" --stop=SEC Stop application after SEC seconds has passed.\n" \ " If 0 is given, this feature is disabled.") #define TEXT_HEADER \ _(" --header=HEADER Append HEADER to HTTP request header. You can use\n"\ " this option repeatedly to specify more than one\n"\ " header:\n"\ " aria2c --header=\"X-A: b78\" --header=\"X-B: 9J1\"\n"\ " http://host/file") #define TEXT_QUIET \ _(" -q, --quiet[=true|false] Make aria2 quiet(no console output).") #define TEXT_ASYNC_DNS \ _(" --async-dns[=true|false] Enable asynchronous DNS.") #define TEXT_FTP_REUSE_CONNECTION \ _(" --ftp-reuse-connection[=true|false] Reuse connection in FTP.") #define TEXT_SUMMARY_INTERVAL \ _(" --summary-interval=SEC Set interval to output download progress summary.\n"\ " Setting 0 suppresses the output.") #define TEXT_LOG_LEVEL \ _(" --log-level=LEVEL Set log level to output.") #define TEXT_REMOTE_TIME \ _(" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from the\n"\ " remote HTTP/FTP server and if it is available,\n"\ " apply it to the local file.") #define TEXT_CONNECT_TIMEOUT \ _(" --connect-timeout=SEC Set the connect timeout in seconds to establish\n"\ " connection to HTTP/FTP/proxy server. After the\n"\ " connection is established, this option makes no\n"\ " effect and --timeout option is used instead.") #define TEXT_MAX_FILE_NOT_FOUND \ _(" --max-file-not-found=NUM If aria2 receives `file not found' status from the\n"\ " remote HTTP/FTP servers NUM times without getting\n"\ " a single byte, then force the download to fail.\n"\ " Specify 0 to disable this option.\n"\ " This options is effective only when using\n"\ " HTTP/FTP servers.") #define TEXT_URI_SELECTOR \ _(" --uri-selector=SELECTOR Specify URI selection algorithm.\n"\ " If 'inorder' is given, URI is tried in the order\n"\ " appeared in the URI list.\n"\ " If 'feedback' is given, aria2 uses download speed\n"\ " observed in the previous downloads and choose\n"\ " fastest server in the URI list. This also\n"\ " effectively skips dead mirrors. The observed\n"\ " download speed is a part of performance profile\n"\ " of servers mentioned in --server-stat-of and\n"\ " --server-stat-if options.\n"\ " If 'adaptive' is given, selects one of the best\n"\ " mirrors for the first and reserved connections.\n"\ " For supplementary ones, it returns mirrors which\n" \ " has not been tested yet, and if each of them has\n"\ " already been tested, returns mirrors which has to\n"\ " be tested again. Otherwise, it doesn't select\n"\ " anymore mirrors. Like 'feedback', it uses a\n"\ " performance profile of servers.") #define TEXT_SERVER_STAT_OF \ _(" --server-stat-of=FILE Specify the filename to which performance profile\n"\ " of the servers is saved. You can load saved data\n"\ " using --server-stat-if option.") #define TEXT_SERVER_STAT_IF \ _(" --server-stat-if=FILE Specify the filename to load performance profile\n"\ " of the servers. The loaded data will be used in\n"\ " some URI selector such as 'feedback'.\n"\ " See also --uri-selector option") #define TEXT_SERVER_STAT_TIMEOUT \ _(" --server-stat-timeout=SEC Specifies timeout in seconds to invalidate\n"\ " performance profile of the servers since the last\n"\ " contact to them.") #define TEXT_AUTO_SAVE_INTERVAL \ _(" --auto-save-interval=SEC Save a control file(*.aria2) every SEC seconds.\n"\ " If 0 is given, a control file is not saved during\n"\ " download. aria2 saves a control file when it stops\n"\ " regardless of the value.") #define TEXT_CERTIFICATE \ _(" --certificate=FILE Use the client certificate in FILE.\n"\ " The certificate must be in PEM format.\n"\ " You may use --private-key option to specify the\n"\ " private key.") #define TEXT_PRIVATE_KEY \ _(" --private-key=FILE Use the private key in FILE.\n"\ " The private key must be decrypted and in PEM\n"\ " format. See also --certificate option.") #define TEXT_CA_CERTIFICATE \ _(" --ca-certificate=FILE Use the certificate authorities in FILE to verify\n"\ " the peers. The certificate file must be in PEM\n"\ " format and can contain multiple CA certificates.\n"\ " Use --check-certificate option to enable\n"\ " verification.") #define TEXT_CHECK_CERTIFICATE \ _(" --check-certificate[=true|false] Verify the peer using certificates specified\n"\ " in --ca-certificate option.") #define TEXT_NO_PROXY \ _(" --no-proxy=DOMAINS Specify comma separated hostnames or domains where\n"\ " proxy should not be used.") #define TEXT_USE_HEAD \ _(" --use-head[=true|false] Use HEAD method for the first request to the HTTP\n"\ " server.") #define TEXT_EVENT_POLL \ _(" --event-poll=POLL Specify the method for polling events.") #define TEXT_XML_RPC_LISTEN_PORT \ _(" --xml-rpc-listen-port=PORT Specify a port number for XML-RPC server to listen\n"\ " to.") #define TEXT_ENABLE_XML_RPC \ _(" --enable-xml-rpc[=true|false] Enable XML-RPC server.\n"\ " It is strongly recommended to set username and\n"\ " password using --xml-rpc-user and --xml-rpc-passwd\n"\ " option. See also --xml-rpc-listen-port option.") #define TEXT_XML_RPC_MAX_REQUEST_SIZE \ _(" --xml-rpc-max-request-size=SIZE Set max size of XML-RPC request. If aria2\n"\ " detects the request is more than SIZE bytes, it\n"\ " drops connection.") #define TEXT_XML_RPC_USER \ _(" --xml-rpc-user=USER Set XML-RPC user.") #define TEXT_XML_RPC_PASSWD \ _(" --xml-rpc-passwd=PASSWD Set XML-RPC password.") #define TEXT_BT_EXTERNAL_IP \ _(" --bt-external-ip=IPADDRESS Specify the external IP address to report to a\n"\ " BitTorrent tracker. Although this function is\n"\ " named 'external', it can accept any kind of IP\n"\ " addresses.") #define TEXT_HTTP_AUTH_CHALLENGE \ _(" --http-auth-challenge[=true|false] Send HTTP authorization header only when it\n"\ " is requested by the server. If false is set, then\n"\ " authorization header is always sent to the server.\n"\ " There is an exception: if username and password\n"\ " are embedded in URI, authorization header is\n"\ " always sent to the server regardless of this\n"\ " option.") #define TEXT_INDEX_OUT \ _(" -O, --index-out=INDEX=PATH Set file path for file with index=INDEX. You can\n"\ " find the file index using the --show-files option.\n"\ " PATH is a relative path to the path specified in\n"\ " --dir option. You can use this option multiple\n"\ " times.") #define TEXT_DRY_RUN \ _(" --dry-run[=true|false] If true is given, aria2 just checks whether the\n"\ " remote file is available and doesn't download\n"\ " data. This option has effect on HTTP/FTP download.\n"\ " BitTorrent downloads are canceled if true is\n"\ " specified.") #define TEXT_BT_TRACKER_INTERVAL \ _(" --bt-tracker-interval=SEC Set the interval in seconds between tracker\n"\ " requests. This completely overrides interval value\n"\ " and aria2 just uses this value and ignores the\n"\ " min interval and interval value in the response of\n"\ " tracker. If 0 is set, aria2 determines interval\n"\ " based on the response of tracker and the download\n"\ " progress.") #define TEXT_ON_DOWNLOAD_COMPLETE \ _(" --on-download-complete=COMMAND Set the command to be executed when download\n"\ " completes.\n"\ " See --on-download-start option for the\n"\ " requirement of COMMAND.\n"\ " See also --on-download-stop option.") #define TEXT_ON_DOWNLOAD_START \ _(" --on-download-start=COMMAND Set the command to be executed when download\n"\ " starts up. COMMAND must take just one argument and\n"\ " GID is passed to COMMAND as a first argument.") #define TEXT_ON_DOWNLOAD_ERROR \ _(" --on-download-error=COMMAND Set the command to be executed when download\n"\ " aborts due to error.\n"\ " See --on-download-start option for the\n"\ " requirement of COMMAND.\n"\ " See also --on-download-stop option.") #define TEXT_ON_DOWNLOAD_STOP \ _(" --on-download-stop=COMMAND Set the command to be executed when download\n"\ " stops. You can override the command to be executed\n"\ " for particular download result using\n"\ " --on-download-complete and --on-download-error. If\n"\ " they are specified, command specified in this\n"\ " option is not executed.\n"\ " See --on-download-start option for the\n"\ " requirement of COMMAND.") #define TEXT_BT_STOP_TIMEOUT \ _(" --bt-stop-timeout=SEC Stop BitTorrent download if download speed is 0 in\n"\ " consecutive SEC seconds. If 0 is given, this\n"\ " feature is disabled.") #define TEXT_XML_RPC_LISTEN_ALL \ _(" --xml-rpc-listen-all[=true|false] Listen incoming XML-RPC requests on all\n"\ " network interfaces. If false is given, listen only\n"\ " on local loopback interface.")