Bootstrap through node added by port message.
Currently bootstrap is executed if the number of buckets in routing
table is 1.
* src/BtPortMessage.{h, cc}
* src/DefaultBtMessageFactory.{h, cc}
* src/PeerInteractionCommand.cc
* test/BtPortMessageTest.cc
* test/MockDHTTask.h
Extract the Peer class's member variables, which are only needed
after
PeerInteractionCommand, into PeerSessionResource class.
This class is instantiated in PeerInteractionCommand class's
ctor and
released in its dtor.
This will make Peer class lightweight and uses less memory for
peers
which are not connected and wait in the queue.
* src/PeerChokeCommand.cc
* src/PeerSessionResource.{h, cc}
* src/PeerInteractionCommand.cc
* src/PeerAbstractCommand.cc: Note: 0 is given to onAbort()
function.
* src/DefaultBtInteractive.cc
* src/BtPieceMessage.cc
* src/BtInterestedMessage.cc
* src/BtUnchokeMessage.cc
* src/DefaultPeerStorage.{h, cc}
* src/PeerInitiateConnectionCommand.cc
* src/ActivePeerConnectionCommand.cc
* src/BtNotInterestedMessage.cc
* src/DefaultBtMessageDispatcher.cc
* src/BtChokeMessage.cc
* src/BtRequestMessage.cc
* src/Peer.{h, cc}
* src/BtRegistry.h
* src/TrackerWatcherCommand.cc
* src/PeerReceiveHandshakeCommand.cc
* test/BtExtendedMessageTest.cc
* test/BtAllowedFastMessageTest.cc
* test/BtCancelMessageTest.cc
* test/DefaultPieceStorageTest.cc
* test/BtBitfieldMessageTest.cc
* test/BtHaveMessageTest.cc
* test/BtNotInterestedMessageTest.cc
* test/BtRequestMessageTest.cc
* test/PeerSessionResourceTest.cc
* test/DefaultBtMessageDispatcherTest.cc
* test/PeerTest.cc
* test/BtInterestedMessageTest.cc
* test/BtRejectMessageTest.cc
* test/BtChokeMessageTest.cc
* test/DefaultPeerStorageTest.cc
* test/BtHaveNoneMessageTest.cc
* test/BtHaveAllMessageTest.cc
* test/DefaultExtensionMessageFactoryTest.cc
* test/BtUnchokeMessageTest.cc
* test/DefaultBtMessageFactoryTest.cc
* test/HandshakeExtensionMessageTest.cc
* test/UTPexExtensionMessageTest.cc
* test/DefaultBtRequestFactoryTest.cc
* test/BtPieceMessageTest.cc
Removed typedef PeerStats.
* src/PeerStat.h
* src/SegmentMan.cc
Commented out ip address comparison because a host can have
multiple
ip addresses and it is hard to predict the hostname is resolved
into
which one.
* test/SocketCoreTest.cc (testWriteAndReadDatagram)
Fixed compiler warning about redefinition of SIZE_MAX.
Use common.h instead of config.h directly here.
* src/Platform.{h, cc}
The check of ENABLE_NLS is made in gettext.h, so it is not
required
here.
* common.h
2008-02-02 gettextize <bug-gnu-gettext@gnu.org>
Updated gettext related files.
* configure.ac (AC_CONFIG_FILES): Add intl/Makefile.
* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
Added the message to inform users that other help categories are
available in -h option.
* src/version_usage.cc
* src/TagContainer.{h, cc}
* test/TagContainerTest.cc
* src/TaggedItem.{h, cc}
* test/TaggedItemTest.cc
* src/HelpItem.h
Rewritten get*Missing*Index functions. Now no need to allocate
memory
each time these functions are called.
* src/BitfieldMan.{h, cc}
* test/BitfieldManTest.cc
* src/array_fun.h
* test/array_funTest.cc
Now BitfieldMan::countBlock() returns BitfieldMan::blocks.
Added new BitfieldMan::countFilteredBlock() to get the number of
blocks
filtered. Removed unnecessary cast to int32_t.
* src/BitfieldMan.{h, cc}
Fixed the bug that DefaultPeerStorage::returnPeer() may delete wrong
peer if there are peers that have same ipaddr and port.
I've experiened segmentation fault and "pure virtual function was
called" error.
* src/Peer.h
* test/PeerTest.cc
* src/DefaultPeerStorage.cc
* test/DefaultPeerStorageTest.cc
Fixed the bug that always first found Segment is removed from
usedSegmentEntries. Removed unused functions.
* src/SegmentMan.{h, cc}
* test/SegmentManTest.cc
Fixed the bug that ServerHost is not removed.
* src/RequestGroup.cc
Move extension from BtRuntime to ExtensionMessageFactory, because
extension can be specified per peer, not per torrent.
* src/DefaultBtInteractive.cc
* src/BtRuntime.h
* src/ExtendedMessagingAware.h
* src/ExtensionMessageFactory.h
* src/DefaultExtensionMessageFactory.cc
* test/DefaultExtensionMessageFactoryTest.cc
Fixed segmentation fault when bad torrent metainfo is parsed.
Added dynamic_cast properly to detect the misconfiguration of
metainfo
and then throw exception or skip it.
* src/DefaultBtContext.{h, cc}
* test/DefaultBtContextTest.cc
* src/AnnounceList.cc
* src/CompactPeerListProcessor.cc
* src/message.h
* src/DefaultBtAnnounce.{h, cc}
* test/DefaultBtAnnounceTest.cc
* src/BencodeVisitor.cc
Allocate bitfield in Peer when it is really used. More
specifically,
bitfield in Peer is allocated after the connection is
established and
deallocated when the connection is dropped.
Since 2 parameters(piece length and total length) was removed
from the
constructor of Peer class, many test classes were modified
accordingly.
See svn log for more detailed information.
* src/PeerInteractionCommand.cc
* src/CompactPeerListProcessor.cc
* src/Peer.cc
* src/DefaultPeerListProcessor.cc
* src/PeerListenCommand.cc
* src/PeerReceiveHandshakeCommand.cc
Fixed memory leak
* src/Piece.cc
Removed incomingPeer. Set 0 to peer's port if it is not a listening
port.
* src/DefaultPeerStorage.{h, cc}
* test/DefaultPeerStorageTest.cc
* src/HandshakeExtensionMessage.cc
* test/HandshakeExtensionMessageTest.cc
* src/Peer.{h, cc}: Added ipaddr and port to identity comparison.
* src/PeerStorage.h
* test/MockPeerStorage.h
* src/PeerListenCommand.cc
Added uTorrent compatible Peer Exchange.
* src/BencodeVisitor.{h, cc}
* test/BencodeVisitorTest.cc
* src/BtConstants.h
* src/BtContext.h: Added 'private' flag.
* src/BtExtendedMessage.{h, cc}
* test/BtExtendedMessageTest.cc
* src/BtHandshakeMessage.{h, cc}: Set extended messaging bit in
reserved field.
* test/BtHandshakeMessageTest.cc
* src/BtMessageFactory.h
* src/BtRegistry.h
* src/BtRuntime.h: This class holds default extension message
IDs for
aria2. By default, aria2 uses ID 8 for ut_pex.
* src/DefaultBtContext.cc
* src/DefaultBtInteractive.{h, cc}: This class holds
_utPexEnabled.
When it is true, aria2 enables ut_pex. This value is set by
PeerInteractionCommand.
* src/DefaultBtMessageFactory.{h, cc}
* test/DefaultBtMessageFactoryTest.cc
* src/DefaultBtMessageReceiver.cc: Moved the code of fast
extension
handling to DefaultBtInteractive class.
* src/DefaultExtensionMessageFactory.{h, cc}
* test/DefaultExtensionMessageFactoryTest.cc
* src/DefaultPeerStorage.cc: Returns false if a peer is already
in
the container(peers and incomingPeers. The equality is
determined by
Peer::id).
* test/DefaultPeerStorageTest.cc
* src/ExtensionMessage.h
* test/MockExtensionMessage.h
* src/ExtensionMessageFactory.h
* test/MockExtensionMessageFactory.h
* src/HandshakeExtensionMessage.{h, cc}
* test/HandshakeExtensionMessageTest.cc
* src/MetaEntry.h
* src/Peer.{h, cc}
* src/PeerInteractionCommand.cc
* src/PeerReceiveHandshakeCommand.cc: Evaluate the return value
of
addIncomingPeer.
* src/PeerMessageUtil.{h, cc}
* src/PeerObject.h
* src/UTPexExtensionMessage.{h, cc}
* test/UTPexExtensionMessageTest.cc
* src/message.h
* src/prefs.h
Fixed the bug that returns incomplete data when it contains null
character. A convenient constructor was also added.
* src/Data.{h, cc}
Rewritten.
* src/CompactPeerListProcessor.cc
Fixed typos.
* src/message.h
* src/MetaFileUtil.cc
Fixed the bug that prevents aria2 from loading cookie file when
expire
value is greater than 2^31-1. BUG#1851066
* src/CookieBoxFactory.cc
* test/CookieBoxFactoryTest.cc
Fixed possible memory leak when an exception is thrown.
* src/XML2SAXMetalinkProcessor.cc
Added Expat support. If both libxml2 and Expat are installed,
then
libxml2 is used by default.
MetalinkProcessorFactory chooses from XML2SAXMetalinkProcessor
and
ExpatMetalinkProcessor according to the configuration.
* src/ExpatMetalinkProcessor.{h, cc}
* src/main.cc: Removed libxml2 specific header and init/free
function.
* src/MetalinkProcessorFactory.{h, cc}
* src/MetalinkHelper.cc
* src/Metalinker.h: Removed unnecessary libxml2 header.
* src/MetalinkProcessor.h
* test/XML2SAXMetalinkProcessorTest.cc: Removed because
MetalinkProcessorTest is used instead.
* test/MetalinkProcessorTest.cc: Added. It is actually the same
with
XML2SAXMetalinkProcessor, replaced XML2SAXMetalinkProcessor with
MetalinkProcessorFactory::newInstance().
* m4/libexpat.m4
* configure.ac: Added configuration options for libexpat.
If several protocols are available for a mirror, aria2 now use
one of
them. --metalink-preferred-protocol option was added to specify
the
preference of protocol.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/ServerHost.{h, cc}
* src/Metalink2RequestGroup.cc
* src/RequestGroup.{h, cc}
* test/RequestGroupTest.cc
* src/option_processing.cc
* src/prefs.h
* src/HttpResponseCommand.cc
* src/MetalinkResource.{h, cc}
* src/FtpNegotiationCommand.cc
* src/MetalinkEntry.{h, cc}
* src/MetalinkEntryTest.cc
Fixed the bug: only first announce URL is tried in AnnounceTier,
in stopped and completed event.
* src/AnnounceList.{h, cc}
* test/AnnounceListTest.cc
* src/DefaultBtAnnounce.cc
* test/DefaultBtAnnounceTest.cc
Sorted URLs.
* test/Metalink2RequestGroupTest.cc
Fixed the bug#1845750; CTRL+C does not stop torrent.
aria2 repeatedly sends stopped request when tracker returns error code.
* src/AnnounceList.cc
* test/AnnounceListTest.cc
* src/AnnounceTier.h
Added a message when ctrl-c is hit.
Now second ctrl-c is also handled in signal handler.
* src/RequestGroupMan.{h, cc}
* src/RequestGroup.{h, cc}
* src/MultiUrlRequestInfo.cc
* src/DownloadEngine.cc
* src/TrackerWatcherCommand.cc
Added XML2SAXMetalinkProcessor class, which is a lot faster than
the predecessor, Xml2MetalinkParser class.
I tested them against 94KB metalink file with 1234 chunk
checksums.
The new one parsed it in 22msec, while it took 6000msec with old
one.
* src/XML2SAXMetalinkProcessor.{h, cc}
* test/XML2SAXMetalinkProcessorTest.cc
* src/MetalinkParserController.{h, cc}
* test/MetalinkParserControllerTest.cc
* src/MetalinkParserState.h: Also added 16 subclasses.
* src/main.cc
* src/Metalink2RequestGroup.cc
* src/MetalinkHelper.cc
* src/MetalinkEntry.cc
* src/ChunkChecksum.h
Rewritten Base64 class for better performance.
* src/Base64.{h, cc}
* test/Base64Test.cc
* src/HttpRequest.cc
Added direct I/O support. The current implementation uses O_DIRECT,
which is not posix standard and is tested on linux 2.6.21.
Currently only file allocation uses direct I/O.
* src/SingleFileAllocationIterator.{h, cc}
* test/SingleFileAllocationIteratorTest.cc
* src/MultiFileAllocationIterator.{h, cc}
* test/MultiFileAllocationIteratorTest.cc
* src/BinaryStream.h
* src/DiskWriter.h
* src/AbstractDiskWriter.{h, cc}
* src/ByteArrayDiskWriter.h
* src/DiskAdaptor.h
* src/AbstractSingleDiskAdaptor.{h, cc}
* src/MultiDiskAdaptor.{h, cc}
* src/FileAllocationEntry.cc
* src/Util.{h, cc}
* src/OptionHandlerFactory.cc
* src/prefs.h
* src/version_usage.cc
* src/option_processing.cc
Moved FileAllocationMan::markCurrentFileAllocationEntryDone() to
handleException.
* src/MultiFileAllocationIterator.cc
Added EINTR handling
* src/SocketCore.cc
Set Content-Type to SingleFileDownloadContext when http response
is
received.
* src/HttpResponseCommand.cc
* src/HttpResponse.{h, cc}
* test/HttpResponseTest.cc
Rewritten to add content-type support.
* src/DownloadHandler.{h, cc}
* src/BtPostDownloadHandler.{h, cc}
* test/BtPostDownloadHandlerTest.cc
* src/MetalinkPostDownloadHandler.{h, cc}
* test/MetalinkPostDownloadHandlerTest.cc
* src/PostDownloadHandler.{h, cc}
* src/DownloadHandlerConstants.{h, cc}
* src/RequestGroup.cc
* src/HttpResponseCommand.cc
* src/FtpNegotiationCommand.cc
* src/SingleFileDownloadContext.{h, cc}
* src/RequestGroup.h
* src/RequestGroupCriteria.h
* src/ContentTypeRequestGroupCriteria.h
Added 'mem' option value for --follow-metalink,
--follow-torrent.
If it is give, metalink/torrent file is not written to the disk,
but
just is kept in memory. Parsing is occurred on memory.
* src/MetalinkHelper.{h, cc}
* src/MetalinkProcessor.h
* src/Xml2MetalinkProcessor.{h, cc}
* test/Xml2MetalinkProcessorTest.cc
* src/DownloadHandlerFactory.{h, cc}
* test/DownloadHandlerFactoryTest.cc
* src/PreDownloadHandler.{h, cc}
* src/OptionHandlerFactory.cc
* src/DefaultBtContext.{h, cc}
* test/DefaultBtContextTest.cc
* src/version_usage.cc
* src/Metalink2RequestGroup.{h, cc}
* src/RequestGroup.{h, cc}
* src/a2functional.h
* test/a2functionalTest.cc
* src/MemoryBufferPreDownloadHandler.{h, cc}
* src/OptionHandlerImpl.h
* src/prefs.h
* src/Util.{h, cc}
* test/UtilTest.cc
Keep DownloadResult rather than RequestGroup after downloads to
reduce
memory usage.
* src/RequestGroupMan.{h, cc}
* src/DownloadEngine.cc
* src/BtDependency.{h, cc}: Changed the type of dependee from
WeakHandle to SharedHandle because WeakHandle could be null.
* src/RequestGroup.{h, cc}
* src/DownloadEngineFactory.cc
* src/DownloadResult.h
Set totalLength after download finished
* src/UnknownLengthPieceStorage.{h, cc}
Keep torrent file specified in metalink in memory.
* src/Metalink2RequestGroup.cc
* src/BtDependency.cc
* src/TrueRequestGroupCriteria.h
Fixed the bug: seekg is used where seekp should be used.
* src/ByteArrayDiskWriter.cc
* test/ByteArraydiskWriterTest.cc
Trim announce URL
* src/DefaultBtContext.cc
* test/ShaVisitorTest.cc
Trim argument s. Give trimed s to exception constructor.
* src/Util.cc (parseInt)(parseLLInt)
* test/UtilTest.cc
Preallocate non-requested file which is adjacent forward to
requested
file('requested' files means the files given in --select-file
option)
if they share a same piece.
This fixes long pause in the file system which doesn't support
sparse
files like FAT32 while downloading.
* src/MultiFileAllocationIterator.{h, cc}
* test/MultiFileAllocationIteratorTest.cc
* src/FileEntry.{h, cc}
Removed unused _option.
* src/MultiDiskAdaptor.h
* test/MultiDiskAdaptorTest.cc
* src/DefaultPieceStorage.cc
Set the default value of --seed-ratio to 1.0.
If 0.0 is given, then seeding continues regardless of share
ratio.
* src/version_usage.cc
* src/option_processing.cc
* src/BtSetup.cc
* doc/aria2c.1.txt
* doc/aria2c.1
Fixed: Selective download is not working in BitTorrent
* src/RequestGroup.cc
Introduced Sequence class. Use this instead of
Util::unfoldRange()
* src/PieceStorage.h
* test/MockPieceStorage.h
* src/UnknownLengthPieceStorage.h
* src/DefaultPieceStorage.{h, cc}
* src/Metalink2RequestGroup.cc
* src/RequestGroup.cc
* src/Sequence.h
* test/SequenceTest.cc
* src/IntSequence.h
* src/message.h
* src/Util.{h, cc}
* test/UtilTest.cc
Added new function 'parse' to catch exception thrown by
subclass's
parseArg
* src/OptionHandler.h
* src/OptionParser.cc
* src/NameMatchOptionHandler.h
* src/OptionHandlerImpl.h
* test/OptionHandlerTest.cc
Added IntegerRangeOptionHandler. Used for --listen-port and
--select-file. Now --listen-port accepts range of port.
* src/OptionHandlerFactory.cc
* src/version_usage.cc
* src/OptionHandlerImpl.h
* src/option_processing.cc
* src/BtSetup.cc
* src/PeerListenCommand.{h, cc}
* doc/aria2c.1.txt
* doc/aria2c.1
Implemented operator< for Exception class to provide easy way to
print
exception stack trace.
* src/Exception.{h, cc}
* src/main.cc
* src/option_processing.cc
Recalculates download progress when loading a control file,
if the piece length of DownloadContext is different from the one
saved
in the control file. Currently in-flight pieces are ignored.
* src/DefaultBtProgressInfoFile.cc
* test/DefaultBtProgressInfoFileTest.cc
* src/Util.{h, cc}
* test/UtilTest.cc
Do not rotate tiers in announce-list.
* src/DefaultBtAnnounce.{h, cc}: Removed trackerNumTry.
AnnounceList::allTiersFailed() used instead to detect whether
all
tiers are tried and failed.
* test/DefaultBtAnnounceTest.cc
* src/AnnounceList.{h, cc}: If all tiers are tried and failed
then
allTiersFailed() returns true. To reset tier pointer, call
resetTier();
* test/AnnounceListTest.cc
* src/TrackerWatcherCommand.cc (execute): Removed DlAbortEx
catch
clause. Catch RecoverableException instead of DlRetryEx instead.
Implemented checksum validation feature(1 checksum for each
file)
The validation takes place after the download.
* src/PieceHashCheckIntegrityEntry.{h, cc}: New class.
* src/IteratableChecksumValidator.{h, cc}: Rewritten.
* src/CheckIntegrityCommand.cc: Changed log message.
* src/Metalink2RequestGroup.cc: Set checksum to
SingleFileDownloadContext.
* src/StreamCheckIntegrityEntry.{h, cc}: Now derived from
PieceHashCheckIntegrity class.
* src/BtCheckIntegrityEntry.{h, cc}: Now derived from
PieceHashCheckIntegrity class.
* src/ChecksumCheckIntegrityEntry.{h, cc}: New class.
* src/IteratableValidator.h: New class.
* src/message.h
* src/CheckIntegrityEntry.{h, cc}
* src/IteratableChunkChecksumValidator.{h, cc}
* src/SingleFileDownloadContext.h
* src/DownloadCommand.cc
--allow-overwrite=true is no longer needed to check file
integrity
before download in BitTorrent download.
* src/RequestGroup.cc (getInitialCommand)
Removed RequestGroup from queue when
RequestGroup::getInitialCommand()
throws exception.
* src/RequestGroupMan.cc (getInitialCommands)
Tatsuhiro Tsujikawa