Added --bt-stop-timeout=SEC option. This function stops BitTorrent
download if the download speed is 0 and the number of seeder is 0
in consecutive SEC seconds. By default, this function is disabled.
* src/BtSetup.cc
* src/Makefile.am
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added the ability to execute command when download starts and
stops. You can also specify command for particular cases such as
complete/error download. Added --on-download-start,
--on-download-stop, --on-download-complete and --on-download-error
option.
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added 'falloc' parameter for --file-allocation option. 'falloc'
allocation mode uses posix_fallocate() system call to allocate
file on disk. If you are using newer file systems such as ext4
(with extents support), btrfs or xfs, 'falloc' is your best
choice. It allocates large(few GiB) files almost instantly.
Don't use 'falloc' with legacy file systems such as ext3 because
it takes almost same time as 'prealloc' and it blocks aria2
entirely until allocation finishes. 'falloc' may not be
available if your system doesn't have posix_fallocate() system
call.
* configure.ac
* src/AbstractDiskWriter.cc
* src/AbstractDiskWriter.h
* src/AbstractSingleDiskAdaptor.cc
* src/BinaryStream.h
* src/BtCheckIntegrityEntry.cc
* src/ByteArrayDiskWriter.h
* src/CheckIntegrityEntry.cc
* src/CheckIntegrityEntry.h
* src/DefaultPieceStorage.cc
* src/DiskAdaptor.cc
* src/DiskAdaptor.h
* src/DiskWriter.h
* src/FallocFileAllocationIterator.cc
* src/FallocFileAllocationIterator.h
* src/FileAllocationEntry.cc
* src/FileAllocationEntry.h
* src/Makefile.am
* src/MultiFileAllocationIterator.cc
* src/MultiFileAllocationIterator.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/StreamCheckIntegrityEntry.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/FallocFileAllocationIteratorTest.cc
* test/Makefile.am
Added an option to specify the interval between tracker
requests.
If non-zero value is specified, aria2 uses it and ignores the
interval value in the response of tracker. If zero is specified,
aria2 determines the inteval value based on the tarcker response
and download progress.
* src/DefaultBtAnnounce.cc
* src/DefaultBtAnnounce.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --dry-run option. In this mode, aria2 just checks whether
the remote file is available and doesn't download data. This
option has effect on HTTP/FTP downloads and BitTorrent downloads
are canceled in this mode.
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/HttpResponseCommand.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroupMan.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --index-out option to specify each file path for torrent.
Here index shown in --show-files option is used to specify which
file path should be altered. For example, to change the file
path with index=2, use --index-out=2=aria2.tar.bz2. You can use
this option multiple times: --index-out=1=aria2.tar.bz2
--index-out=2=aria2-opt.tar.bz2. The short hand form -O is also
available. This option can be specified in -i list.
* src/DefaultBtContext.cc
* src/DefaultBtContext.h
* src/MultiDiskAdaptor.cc
* src/MultiDiskAdaptor.h
* src/MultiFileAllocationIterator.cc
* src/OptionHandlerFactory.cc
* src/OptionHandlerImpl.h
* src/Util.cc
* src/Util.h
* src/download_helper.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtContextTest.cc
* test/MultiDiskAdaptorTest.cc
* test/MultiFileAllocationIteratorTest.cc
* test/UtilTest.cc
Added --max-overall-download-limit option. Now
--max-upload-limit option is not ignored when
--max-overall-upload-limit option has non-zero value. aria2
checks download(upload) speed in the order:
first checks overall speed limit and if it is not exceeded, then
checks speed limit per download. Thus you can specify both
value. For example, set --max-overall-download-limit=1M and
--max-download-limit=500K to prevent from one download from
eating all overall speed limit.
* src/DefaultBtInteractive.cc
* src/DefaultBtInteractive.h
* src/DefaultBtMessageDispatcher.cc
* src/DefaultBtMessageDispatcher.h
* src/DownloadCommand.cc
* src/DownloadCommand.h
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/PeerInteractionCommand.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtMessageDispatcherTest.cc
Added --http-auth-challenge option. If it is set to true(by
default), aria2 sends HTTP authorization header only when it is
requested by the server. If false is set, then authorization
header is always sent to the server. This is useful for servers
that don't respond 401 code when authentication is required.
There is an exception: if username and password are embedded in
URI, authorization header is always sent to the server
regardless of this option.
* src/AuthConfigFactory.cc
* src/HttpSkipResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/AuthConfigFactoryTest.cc
* test/HttpRequestTest.cc
Added --bt-external-ip option. You can specify the external IP
address to report to a BitTorrent tracker. Although this
function is named 'external', it can accept any kind of IP
addresses.
* src/DefaultBtAnnounce.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtAnnounceTest.cc
Added experimental built-in HTTP server. Currently, when a
client accesses to the server, it responds with the current
download progress. By default, it is disabled. To enable the
server, give --enable-http-server option. To change the default
port number for the server to listen to, use
--http-server-listen-port option.
The response HTML is very simple and refreshes it self each 1
second. Because of this refresh, you see flicker in normal web
browser such as Firefox. I recommend to use console-based
browser such as elinks, w3m. To connect to the server, run
'elinks http://localhost:6800/' while running aria2. Please
replace port number '6800'(which is default) with your
preference.
* src/DownloadEngineFactory.cc
* src/HttpHeader.cc
* src/HttpHeader.h
* src/HttpHeaderProcessor.cc
* src/HttpHeaderProcessor.h
* src/HttpListenCommand.cc
* src/HttpListenCommand.h
* src/HttpServer.cc
* src/HttpServer.h
* src/HttpServerCommand.cc
* src/HttpServerCommand.h
* src/HttpServerResponseCommand.cc
* src/HttpServerResponseCommand.h
* src/Makefile.am
* src/OptionHandlerFactory.cc
* src/Util.cc
* src/Util.h
* src/help_tags.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/HttpHeaderProcessorTest.cc
* test/UtilTest.cc
Added --bt-max-peers option to specify the maximum number of
peers per torrent. 0 means unlimited number of peers.
* src/ActivePeerConnectionCommand.cc
* src/BtRuntime.h
* src/DefaultPeerStorage.cc
* src/DefaultPeerStorage.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultPeerStorageTest.cc
Added --bt-hash-check-seed option. If true is given to this
option, after hash check using --check-integrity option and file
is complete, continue to seed file. If you want to check file
and download it only when it is damaged or incomplete, set this
option to false. This option has effect only on BitTorrent
download. The default value is true(This is the same behavior
with the previous release).
* src/BtCheckIntegrityEntry.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --event-poll option to select the method for polling
events.
The available methods are "select" and "epoll". "epoll" is
available on Linux only. The earlier release has the compile
option to choose from these methods.
* configure.ac
* src/RequestGroupMan.cc
* src/OptionHandlerFactory.cc
* src/EpollEventPoll.h
* src/StreamFileAllocationEntry.cc
* src/a2io.h
* src/SelectEventPoll.h
* src/option_processing.cc
* src/prefs.h
* src/EpollEventPoll.cc
* src/EventPoll.h
* src/SocketCore.h
* src/Makefile.am
* src/main.cc
* src/DownloadEngine.h
* src/SelectEventPoll.cc
* src/DownloadEngine.cc
* src/SocketCore.cc
* src/DownloadEngineFactory.cc
* src/Makefile.in
* src/prefs.cc
* src/usage_text.h
Added --use-head option to toggle whether HEAD method should be
used in the first HTTP request. By default aria2 uses HEAD
method as the first request. When the server doesn't recognize
HEAD, then give aria2 --use-head=false to force aria2 to use GET
method instead.
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --max-overall-upload-limit option. This option limits the
overall upload speed. Stated in help message that the existing
--max-upload-limit option limits the upload speed per each
torrent. Man page is also updated.
* doc/aria2c.1.txt
* src/DefaultBtMessageDispatcher.cc
* src/DefaultBtMessageDispatcher.h
* src/OptionHandlerFactory.cc
* src/PeerInteractionCommand.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added -V for the short form of --check-integrity option.
Now the argument of --check-integrity option is optional:
if it is omitted, it is evaluated as true.
* doc/aria2c.1.txt
* src/option_processing.cc
* src/usage_text.h
Made the default value of --ftp-pasv option set to true and it
can take true/false values.
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/usage_text.h
* doc/aria2c.1.txt
Added --no-proxy option. It receives comman separated hostname
or domains to which proxy should not be used.
aria2 honors the environment variable no_proxy to override
no-proxy value in configuration file. The user can override the
environment variable no_proxy with --no-proxy command-line
option.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added the ability to verify peer in SSL/TLS using given CA
certificates.
The CA certificates are specified in --ca-certificate option.
By default, the verification is disabled. Use --check-certificate
option to enable it.
* src/HttpRequestCommand.cc
* src/LibgnutlsTLSContext.cc
* src/LibgnutlsTLSContext.h
* src/LibsslTLSContext.cc
* src/LibsslTLSContext.h
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/SocketCore.cc
* src/SocketCore.h
* src/a2functional.h
* src/message.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added client certificate authentication for SSL/TLS.
Currently a private key must be decrypted for use with aria2.
If a user accidentally gives encrypted file to aria2 then
following thing happens:
If encrypted private key is given to aria2, it behaves
differently depending on the ssl library it uses. If aria2 built
with openssl then openssl prompts the user for password.
If aria2 build with gnutls then aria2 exists with error at start up.
* src/DownloadEngineFactory.cc
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --auto-save-interval=SEC option. A control file(*.aria2)
is saved
every SEC seconds.
* src/DownloadEngineFactory.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/usage_text.h
Added --dht-file-path option to change the path to dht.dat,
which is a
serialized DHT routing table.
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/usage_text.h
Tatsuhiro Tsujikawa