Added --bt-max-peers option to specify the maximum number of
peers per torrent. 0 means unlimited number of peers.
* src/ActivePeerConnectionCommand.cc
* src/BtRuntime.h
* src/DefaultPeerStorage.cc
* src/DefaultPeerStorage.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultPeerStorageTest.cc
Fixed the bug that aria2 downloads faster than
max-download-limit when
downloading file using both HTTP(or FTP) and BitTorrent, because
aria2
evaluates speed separatly(HTTP and BiTorrent) against
max-download-limit
, instead of sum of them.
* src/ActivePeerConnectionCommand.cc
* src/DefaultBtInteractive.cc
* src/DownloadCommand.cc
* src/PeerInteractionCommand.cc
* src/PeerReceiveHandshakeCommand.cc
Contact tracker frequently when the number of connections are 0
and
download is not finished yet.
* src/ActivePeerConnectionCommand.cc
* src/BtAnnounce.h
* src/DefaultBtAnnounce.cc
* src/DefaultBtAnnounce.h
* test/MockBtAnnounce.h
Fixed the bug that the number of connected peer is exceeding the
limit
(55 by default) in seeding mode.
Multiplied 0.8 to _maxUploadSpeedLimit.
* src/ActivePeerConnectionCommand.cc
Actively establish connection to peers in seeding, when peer
cache
is not full and max upload speed limit is not reached.
* src/ActivePeerConnectionCommand.cc
* src/ActivePeerConnectionCommand.h
Determin _threadtholdSpeed in each constructor for
ActivePeerConnectionCommand and PeerReceiveHandshakeCommand.
* src/ActivePeerConnectionCommand.{h, cc}
* src/PeerReceiveHandshakeCommand.{h, cc}
* src/BtSetup.cc
* src/BtConstants.h
Extract the Peer class's member variables, which are only needed
after
PeerInteractionCommand, into PeerSessionResource class.
This class is instantiated in PeerInteractionCommand class's
ctor and
released in its dtor.
This will make Peer class lightweight and uses less memory for
peers
which are not connected and wait in the queue.
* src/PeerChokeCommand.cc
* src/PeerSessionResource.{h, cc}
* src/PeerInteractionCommand.cc
* src/PeerAbstractCommand.cc: Note: 0 is given to onAbort()
function.
* src/DefaultBtInteractive.cc
* src/BtPieceMessage.cc
* src/BtInterestedMessage.cc
* src/BtUnchokeMessage.cc
* src/DefaultPeerStorage.{h, cc}
* src/PeerInitiateConnectionCommand.cc
* src/ActivePeerConnectionCommand.cc
* src/BtNotInterestedMessage.cc
* src/DefaultBtMessageDispatcher.cc
* src/BtChokeMessage.cc
* src/BtRequestMessage.cc
* src/Peer.{h, cc}
* src/BtRegistry.h
* src/TrackerWatcherCommand.cc
* src/PeerReceiveHandshakeCommand.cc
* test/BtExtendedMessageTest.cc
* test/BtAllowedFastMessageTest.cc
* test/BtCancelMessageTest.cc
* test/DefaultPieceStorageTest.cc
* test/BtBitfieldMessageTest.cc
* test/BtHaveMessageTest.cc
* test/BtNotInterestedMessageTest.cc
* test/BtRequestMessageTest.cc
* test/PeerSessionResourceTest.cc
* test/DefaultBtMessageDispatcherTest.cc
* test/PeerTest.cc
* test/BtInterestedMessageTest.cc
* test/BtRejectMessageTest.cc
* test/BtChokeMessageTest.cc
* test/DefaultPeerStorageTest.cc
* test/BtHaveNoneMessageTest.cc
* test/BtHaveAllMessageTest.cc
* test/DefaultExtensionMessageFactoryTest.cc
* test/BtUnchokeMessageTest.cc
* test/DefaultBtMessageFactoryTest.cc
* test/HandshakeExtensionMessageTest.cc
* test/UTPexExtensionMessageTest.cc
* test/DefaultBtRequestFactoryTest.cc
* test/BtPieceMessageTest.cc
Removed typedef PeerStats.
* src/PeerStat.h
* src/SegmentMan.cc
Use PREF_MAX_DOWNLOAD_LIMIT as a threshold for
ActivePeerConnectionCommand when it is given and
PREF_MAX_DOWNLOAD_LIMIT < default threshold.
* src/ActivePeerConnectionCommand.{h, cc}
* src/BtSetup.cc
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
Changed the default value of PREF_PEER_CONNECTION_TIMEOUT and
lowestSpeedLimit in ActivePeerConnectionCommand. TODO: Make them
command-line options.
* src/option_processing.cc
* src/ActivePeerConnectionCommand.cc
Implemented BitTorrent/http/ftp integrated download.
I've rewritten lots of files and now some headers have forward
class declarations to reduce compile time.
The implementation is extremely alpha stage, I recommend to use this
for testing purpose only.
Fixed the bug that prevents cookies from being sent to the
server
if the domain of cookie is FQDN and starts with ".".
* src/Cookie.cc (match)
To add the ability to change peer id.
* src/DefaultBtContext.h
(_peerIdPrefix): New variable
(setPeerIdPrefix): New function.
* src/torrentRequestInfo.cc
(execute): Set the option value of PREF_PEER_ID_PREFIX to
DefaultBtContext.
* src/main.cc (main): Added peer-id-prefix command-line option.
The usage message is not added yet.
* src/DefaultBtContext.cc
(generatePeerId): Use _peerIdPrefix.
* src/prefs.h (PREF_PEER_ID_PREFIX): New definition.
* src/PeerAbstractCommand.cc
(onAbort): Call PeerStorage::returnPeer()
* src/DefaultPeerStorage.h, src/DefaultPeerStorage.cc
(incomingPeers): New variable.
(addIncomingPeer): New function.
(returnPeer): New function.
(onErasingPeer): New function.
(addPeer): push_back -> push_front
(getActivePeers): Rewritten.
(calculateStat): Rewritten.
* src/PeerStorage.h
(TransferStat::copy): New function.
(TransferStat::TransferStat): New function.
(TransferStat::operator=): New function.
(addIncomingPeer): New function.
(returnPeer): New function.
* src/PeerListenCommand.cc
(execute): Use PeerStorage::addIncomingPeer() instead of
Peer::addPeer().
Tatsuhiro Tsujikawa