Added --max-file-not-found=NUM option. If aria2 receives `file
not
found' error from HTTP/FTP server NUM times without getting
single
bytes of data, then force the download to fail.
Basically aria2 tris all URIs available. So if long list of URIs
are
specified in Metalink, then aria2 will take a long time to fail
eventually if all URIs are outdated. This option eases this
situation
to limit the number of servers to try.
* src/FtpNegotiationCommand.cc
* src/HelpItemFactory.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/PeerStat.h
* src/RequestGroup.cc
* src/RequestGroup.h
* src/SegmentMan.cc
* src/SegmentMan.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Implemented the ability to get timestamp from remote HTTP server
and
apply it to local file. To enable this feature, --remote-time
option
is added. No usage text has been written yet.
If several servers returns difference timestamp, then aria2 uses
latest
one.
* src/CopyDiskAdaptor.cc
* src/CopyDiskAdaptor.h
* src/DirectDiskAdaptor.cc
* src/DirectDiskAdaptor.h
* src/DiskAdaptor.h
* src/File.cc
* src/File.h
* src/HttpHeader.cc
* src/HttpHeader.h
* src/HttpResponse.cc
* src/HttpResponse.h
* src/HttpResponseCommand.cc
* src/HttpResponseCommand.h
* src/MultiDiskAdaptor.cc
* src/MultiDiskAdaptor.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/CopyDiskAdaptorTest.cc
* test/FileTest.cc
* test/Makefile.am
* test/Makefile.in
* test/MultiDiskAdaptorTest.cc
* test/TestUtil.cc
If an error occurred with a URI, remove identical URI from
remaining
URI list because it is likely that same error occurred in the
end and it
is waste of time.
* src/AbstractCommand.cc
* src/RequestGroup.cc
* src/RequestGroup.h
Implemented download speed based URI selection algorithm.
Introduced new option --uri-selector.
If --uri-selector=feedback is given, aria2 uses download speed
observed
in the previous downloads and chooses fastest server in the URI
list.
Currently at most 10 URIs are considered to introduce
randomeness for
finding better servers. The speed is average download speed in
the
downloads.
On the other hand, if --uri-selector=inorder is given, which is
default,
URI is tried in order in URI list.
The usage text for the new option has not been written yet.
* src/AbstractCommand.cc
* src/DownloadCommand.cc
* src/DownloadEngine.cc
* src/DownloadEngineFactory.cc
* src/InOrderURISelector.cc
* src/InOrderURISelector.h
* src/OptionHandlerFactory.cc
* src/PeerStat.h
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/SegmentMan.cc
* src/SegmentMan.h
* src/ServerStat.cc
* src/ServerStat.h
* src/ServerStatMan.cc
* src/ServerStatMan.h
* src/ServerStatURISelector.cc
* src/ServerStatURISelector.h
* src/URISelector.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/InOrderURISelectorTest.cc
* test/RequestGroupManTest.cc
* test/ServerStatManTest.cc
* test/ServerStatURISelectorTest.cc
Renamed --bt-seed option as --bt-seed-unverified so that it
makes clear
that this is not going to verify files using piece hashes.
* src/HelpItemFactory.cc
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Use Option::getAsBool(...) instead of Option::get(...) and
compare
it with V_TRUE.
* src/DefaultPieceStorage.cc
* src/DownloadCommand.cc
* src/FtpNegotiationCommand.cc
* src/HttpRequest.cc
* src/InitiateConnectionCommand.cc
* src/RequestGroup.cc
Replaced "" with static const variable A2STR::NIL.
Replaced string comparison against "" with std::string::empty().
Added PROTO_* to Request class and use them as a protocol string
constant.
Made "started", "stopped", "completed" static const variable in
AnnounceList class.
Set Request::setKeepAliveHint() and Request::setPipeliningHint()
in InitiateConnectionCommandFactory. They should be set only
when
the protocol is HTTP or HTTPS.
* src/InitiateConnectionCommandFactory.cc
* src/RequestGroup.cc
Fixed the bug that the control file(.aria2 file) is not renamed
according to tryAutoFileRenaming().
tryAutoFileRenaming() was rewritten so that if both renamed file
and
its control file exist, use them and continue download.
The old implementation didn't take into account of control
file's
existence, so basically you couldn't continue download of
renamed file.
* src/BtProgressInfoFile.h
* src/DefaultBtProgressInfoFile.cc
* src/DefaultBtProgressInfoFile.h
* src/NullProgressInfoFile.h
* src/RequestGroup.cc
* test/DefaultBtProgressInfoFileTest.cc
* test/MockBtProgressInfoFile.h
Rewritten Exception class. Throw exception object, not its pointer and
catch by reference, so that remove problematic delete operator for
catched exception.
* src/Exception.cc
* src/Exception.h
* test/ExceptionTest.cc
* src/*: All files throwing/catching exception.
* test/*: All files throwing/catching exception.
Added build-in "Accept-Feature" support. For now only "metalink" is
used in this header field.
This "metalink" value is removed from the list when connecting URLs
fed by metalink file to avoid loop in "transparent" metlaink.
* src/HttpRequest.cc
* src/HttpRequest.h: Renamed _userHeaders as _headers. Accept-Feature
header is also held in this variable. Also renamed setUserHeaders as
addHeader and it was rewritten to add header not just to clear the old
value.
* src/HttpRequestCommand.cc
* src/Metalink2RequestGroup.cc: Added the code to remove "metalink"
from "Accept-Feature" list.
* src/RequestGroup.cc: Added "metalink" to "Accept-Feature" by default.
* src/RequestGroup.h
* src/TaggedItem.cc: Moved Concat class to a2functional.h.
* src/a2functional.h: Included <string> because Concat class depends on
it.
* test/HttpRequestTest.cc
Eliminates the time lag between sequential downloads and
commands in
the same RequestGroup.
In old implementation, aria2 occasionally waits 1 seconds before
executing next command or RequestGroup.
This is really a waste of time, and new implementation
eliminates
this unnecessary time lag.
* src/AbstractCommand.cc
* src/AutoSaveCommand.cc
* src/CheckIntegrityCommand.cc
* src/Command.{cc, h}
* src/DownloadEngine.{cc, h}
* src/DownloadEngineFactory.cc
* src/FileAllocationCommand.cc
* src/FileAllocationDispatcherCommand.cc
* src/FillRequestGroupCommand.cc
* src/FtpInitiateConnectionCommand.cc
* src/HaveEraseCommand.cc
* src/HttpInitiateConnectionCommand.cc
* src/HttpResponseCommand.cc
* src/RealtimeCommand.cc
* src/RequestGroup.cc
* src/RequestGroupMan.cc
* src/StreamFileAllocationEntry.cc
* src/TimeBasedCommand.{cc, h}
* src/TimedHaltCommand.cc
Rewritten SharedHandle. Now copy constructor taking raw pointer
has
keyword explicit and SharedHandle's default constructor
initializes
its internal obj to null, old implementation initializes it
using
obj's default constructor.
To assign null, write SharedHandle<T> x(...); x.reset();
TODO: test/SharedHandleTest.cc needs more tests.
* src/SharedHandle.h
Added the ability to load nodes from torrent file. These nodes are
added to the routing table when downloading that torrent.
* src/BtContext.h
* src/DefaultBtContext.{h, cc}
* src/DHTSetup.cc
* src/DHTEntryPointNameResolveCommand.{h, cc}: Now accepts list of
hostname and port pair, and resolves all of them.
* src/NameResolver.{h, cc}: Added reset().
* src/RequestGroup.cc
* test/DefaultBtContextTest.cc
* test/MockBtContext.h
Removed assert() from DefaultBtContext and throw exception instead.
* src/DefaultBtContext.cc
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
Fixed the bug that always first found Segment is removed from
usedSegmentEntries. Removed unused functions.
* src/SegmentMan.{h, cc}
* test/SegmentManTest.cc
Fixed the bug that ServerHost is not removed.
* src/RequestGroup.cc
Show the seed ratio after torrent downloads.
For example, after torrent download completed and --seed-time
and
--seed-ratio conditions are fulfilled, following message is
printed
right after "Download complete: .....":
Your share ratio was 1.0, uploaded/downloaded=12M/12M
* src/RequestGroupMan.cc
* src/RequestGroup.{h, cc}
* src/message.h
Remove a defunct control file. A defunct control file means that
while
it exists, but the corresponding download file is missing.
After its removal, a download restarts from the beginning.
* src/RequestGroup.cc
* src/message.h
If several protocols are available for a mirror, aria2 now use
one of
them. --metalink-preferred-protocol option was added to specify
the
preference of protocol.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/ServerHost.{h, cc}
* src/Metalink2RequestGroup.cc
* src/RequestGroup.{h, cc}
* test/RequestGroupTest.cc
* src/option_processing.cc
* src/prefs.h
* src/HttpResponseCommand.cc
* src/MetalinkResource.{h, cc}
* src/FtpNegotiationCommand.cc
* src/MetalinkEntry.{h, cc}
* src/MetalinkEntryTest.cc
Fixed the bug#1845750; CTRL+C does not stop torrent.
aria2 repeatedly sends stopped request when tracker returns error code.
* src/AnnounceList.cc
* test/AnnounceListTest.cc
* src/AnnounceTier.h
Added a message when ctrl-c is hit.
Now second ctrl-c is also handled in signal handler.
* src/RequestGroupMan.{h, cc}
* src/RequestGroup.{h, cc}
* src/MultiUrlRequestInfo.cc
* src/DownloadEngine.cc
* src/TrackerWatcherCommand.cc
Fixed the bug#1841757: aria2 will connect to server to only get
file size.
* src/StreamFileAllocationEntry.cc
* src/option_processing.cc
* src/HttpResponseCommand.cc: Now reuse connection in segmented
downloads.
* src/FtpNegotiationCommand.cc
Suppressed wrong message when finding PreDownloadHandler
* src/RequestGroup.cc
Added direct I/O support. The current implementation uses O_DIRECT,
which is not posix standard and is tested on linux 2.6.21.
Currently only file allocation uses direct I/O.
* src/SingleFileAllocationIterator.{h, cc}
* test/SingleFileAllocationIteratorTest.cc
* src/MultiFileAllocationIterator.{h, cc}
* test/MultiFileAllocationIteratorTest.cc
* src/BinaryStream.h
* src/DiskWriter.h
* src/AbstractDiskWriter.{h, cc}
* src/ByteArrayDiskWriter.h
* src/DiskAdaptor.h
* src/AbstractSingleDiskAdaptor.{h, cc}
* src/MultiDiskAdaptor.{h, cc}
* src/FileAllocationEntry.cc
* src/Util.{h, cc}
* src/OptionHandlerFactory.cc
* src/prefs.h
* src/version_usage.cc
* src/option_processing.cc
Moved FileAllocationMan::markCurrentFileAllocationEntryDone() to
handleException.
* src/MultiFileAllocationIterator.cc
Added EINTR handling
* src/SocketCore.cc
Rewritten to add content-type support.
* src/DownloadHandler.{h, cc}
* src/BtPostDownloadHandler.{h, cc}
* test/BtPostDownloadHandlerTest.cc
* src/MetalinkPostDownloadHandler.{h, cc}
* test/MetalinkPostDownloadHandlerTest.cc
* src/PostDownloadHandler.{h, cc}
* src/DownloadHandlerConstants.{h, cc}
* src/RequestGroup.cc
* src/HttpResponseCommand.cc
* src/FtpNegotiationCommand.cc
* src/SingleFileDownloadContext.{h, cc}
* src/RequestGroup.h
* src/RequestGroupCriteria.h
* src/ContentTypeRequestGroupCriteria.h
Added 'mem' option value for --follow-metalink,
--follow-torrent.
If it is give, metalink/torrent file is not written to the disk,
but
just is kept in memory. Parsing is occurred on memory.
* src/MetalinkHelper.{h, cc}
* src/MetalinkProcessor.h
* src/Xml2MetalinkProcessor.{h, cc}
* test/Xml2MetalinkProcessorTest.cc
* src/DownloadHandlerFactory.{h, cc}
* test/DownloadHandlerFactoryTest.cc
* src/PreDownloadHandler.{h, cc}
* src/OptionHandlerFactory.cc
* src/DefaultBtContext.{h, cc}
* test/DefaultBtContextTest.cc
* src/version_usage.cc
* src/Metalink2RequestGroup.{h, cc}
* src/RequestGroup.{h, cc}
* src/a2functional.h
* test/a2functionalTest.cc
* src/MemoryBufferPreDownloadHandler.{h, cc}
* src/OptionHandlerImpl.h
* src/prefs.h
* src/Util.{h, cc}
* test/UtilTest.cc
Keep DownloadResult rather than RequestGroup after downloads to
reduce
memory usage.
* src/RequestGroupMan.{h, cc}
* src/DownloadEngine.cc
* src/BtDependency.{h, cc}: Changed the type of dependee from
WeakHandle to SharedHandle because WeakHandle could be null.
* src/RequestGroup.{h, cc}
* src/DownloadEngineFactory.cc
* src/DownloadResult.h
Set totalLength after download finished
* src/UnknownLengthPieceStorage.{h, cc}
Keep torrent file specified in metalink in memory.
* src/Metalink2RequestGroup.cc
* src/BtDependency.cc
* src/TrueRequestGroupCriteria.h
Fixed the bug: seekg is used where seekp should be used.
* src/ByteArrayDiskWriter.cc
* test/ByteArraydiskWriterTest.cc
Tatsuhiro Tsujikawa