This option sets GID manually. aria2 identifies each download by the
ID called GID. The GID must be hex string of 16 characters, thus
[0-9a-zA-Z] are allowed and leading zeros must not be stripped. The
GID all 0 is reserved and must not be used. The GID must be unique,
otherwise error is reported and the download is not added. This
option is useful when restoring the sessions saved using
--save-session option. If this option is not used, new GID is
generated by aria2.
This option enables disk cache. If SIZE is 0, the disk cache is
disabled. This feature caches the downloaded data in memory, which
grows to at most SIZE bytes. The cache storage is created for aria2
instance and shared by all downloads. The one advantage of the disk
cache is reduce the disk seek time because the data is written in
larger unit and it is reordered by the offset of the file. If the
underlying file is heavily fragmented it is not the case.
--force-save option saves download with --save-session option even if
the download is completed or removed. This may be useful to save
BitTorrent seeding which is recognized as completed state. The
default value is false.
If true is given, which is default, save the uploaded torrent or
metalink metadata in the directory specified by --dir option. The
filename consists of SHA1-hash hex string of metadata plus
extension. For torrent, the extension is '.torrent'. For metalink, it
is '.meta4'. If false is given to this option, the downloads added by
aria2.addTorrent or aria2.addMetalink will not be saved by
--save-session option.
To enable RPC over SSL/TLS, specify server certificate and private key
using --rpc-certificate and --rpc-private-key options and enable
--rpc-secure option. After the encryption is enabled, use https and
wss scheme to access RPC server.
--file-allocation option can now take new value 'trunc'. 'trunc' uses
ftruncate() system call or platform-specific counterpart to truncate a
file to a specified length.
Removes the unselected files when download is completed in
BitTorrent. To selecting files, use --select-file option. If it is not
used, all files are assumed to be selected. Please use this option
with care because it will actually remove files from your disk.
This option is default to false.
If true is given to --deferred-input option, aria2 does not read all
URIs and options from file specified by -i option at startup, but it
reads one by one when it needs later. This may reduce memory usage if
input file contains a lot of URIs to download. If false is given,
aria2 reads all URIs and options at startup. This option defaults to
false.
This feature stops application when process PID is not running. This
is useful if aria2 process is forked from a parent process. The parent
process can fork aria2 with its own pid and when parent process exits
for some reason, aria2 can detect it and shutdown itself.
The code which detects whether or not given process PID is running is
contributed by Emmanuel Engelhart.
This option sets a piece length for HTTP/FTP downloads. This is the
boundary when aria2 splits a file. All splits occur at multiple of
this length. This option will be ignored in BitTorrent downloads. It
will be also ignored if Metalink file contains piece hashes.
Added --checksum=TYPE=DIGEST option. This option sets checksum. TYPE
is hash type. The supported hash type is listed in "Hash Algorithms"
in "aria2c -v". DIGEST is hex digest. For example, setting sha-1
digest looks like this: sha-1=0192ba11326fe2298c8cb4de616f4d4140213838
This option applies only to HTTP(S)/FTP downloads.
Added --hash-check-only opiton. If true is given, after hash check
using --check-integrity option, abort download whether or not download
is complete. The default value is false.
Added --download-result=OPT option. This option changes the way
"Download Results" is formatted. If OPT is 'default', print GID,
status, average download speed and path/URI. If multiple files are
involved, path/URI of first requested file is printed and remaining
ones are omitted. If OPT is 'full', print GID, status, average
download speed, percentage of progress and path/URI. The percentage of
progress and path/URI are printed for each requested file in each row.
This option pauses download after added. This option is effective only
when --enable-rpc=true is given. When --save-session option is used
and there are paused downloads, they are saved with --pause=true so
that it will become paused state when the session is recovered.
This option truncates console readout to fit in a single line. This
is default. Give false value to this option to tell aria2 not to
truncate console readout.
This option specifies piece selection algorithm used in HTTP/FTP
download. Piece means fixed length segment which is downloaded in
parallel in segmented download. If 'default' is given, aria2 selects
piece so that it reduces the number of establishing connection. This
is reasonable default behaviour because establishing connection is an
expensive operation. If 'inorder' is given, aria2 selects piece which
has minimum index. Index=0 means first of the file. This will be
useful to view movie while downloading it. --enable-http-pipelining
option may be useful to reduce reconnection overhead. Please note
that aria2 honors --min-split-size option, so it will be necessary to
specify a reasonable value to --min-split-size option.
--metalink-uri option specifies base URI to resolve relative URI in
metalink file stored in local disk. If URI points to a directory, URI
must end with '/'.
--enable-rpc and --rpc-* option instead.
--enable-xml-rpc and --xml-rpc-* option can be used but warning
message will be shown. The help tag #xml-rpc was replaced with #rpc.
This option accepts comma separated list of DNS server address used in
asynchronous DNS resolver. Usually asynchronous DNS resolver reads DNS
server addresses from /etc/resolv.conf. When this option is used, it
uses DNS servers specified in this option instead of ones in
/etc/resolv.conf. You can specify both IPv4 and IPv6 address. This
option is useful when the system does not have /etc/resolv.conf and
user does not have the permission to create it.
This option was once existed in aria2 but erased on 2009-09-20. Now
it is resurrected once again. We choose 2 as default value, but there
is no good theory behind it. Now we retry HTTP download when remote
server returns 503 Service Unavailable if --retry-wait > 0. We also
added error code 29: HTTP_SERVICE_UNAVAILABLE.
Made --allow-overwrite, --allow-piece-length-change,
--realtime-chunk-checksum and --bt-require-crypto take optional
argument. Fixed usage doc for --metalink-enable-unique-protocol.
* doc/aria2c.1.txt
* src/OptionHandlerFactory.cc
* src/usage_text.h
Added short option -k for --min-split-size option and -x for
--max-connection-per-server option. Raised maximum value of
--max-connection-per-server up to 16.
* src/OptionHandlerFactory.cc
* src/usage_text.h
Added --max-download-result=NUM option. This option sets maximum
number of download result kept in memory. The download results are
completed/error/ removed downloads. The download results are
stored in FIFO queue and it can store at most NUM download
results. When queue is full and new download result is created,
oldest download result is removed from the front of the queue and
new one is pushed to the back. Setting big number in this option
may result high memory consumption after thousands of
downloads. Specifying 0 means no download result is kept. Default
value is 1000.
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --bt-tracker and --bt-exclude-tracker option. In
--bt-tracker option, you can specify comma separated list of
additional BitTorrent tracker's announce URI. These URIs are not
affected by --bt-exclude-tracker option because they are added
after URIs in --bt-exclude-tracker option are removed. In
--bt-exclude-tracker option, you can specify comma separated list
of BitTorrent tracker's announce URI to remove. You can use
special value '*' which matches all URIs, thus removes all
announce URIs. When specifying '*' in shell command-line, don't
forget to escape or quote it.
* src/BtDependency.cc
* src/OptionHandlerFactory.cc
* src/UTMetadataPostDownloadHandler.cc
* src/bittorrent_helper.cc
* src/bittorrent_helper.h
* src/download_helper.cc
* src/download_helper.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/BittorrentHelperTest.cc
* test/DownloadHelperTest.cc
Added --enable-async-dns6 option. This option enables IPv6 name
resolution in asynchronous DNS resolver. This option will be
ignored when --async-dns=false.
* doc/aria2c.1.txt
* src/AbstractCommand.cc
* src/AsyncNameResolver.cc
* src/AsyncNameResolver.h
* src/DHTEntryPointNameResolveCommand.cc
* src/OptionHandlerFactory.cc
* src/download_helper.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Tatsuhiro Tsujikawa