Added 'falloc' parameter for --file-allocation option. 'falloc'
allocation mode uses posix_fallocate() system call to allocate
file on disk. If you are using newer file systems such as ext4
(with extents support), btrfs or xfs, 'falloc' is your best
choice. It allocates large(few GiB) files almost instantly.
Don't use 'falloc' with legacy file systems such as ext3 because
it takes almost same time as 'prealloc' and it blocks aria2
entirely until allocation finishes. 'falloc' may not be
available if your system doesn't have posix_fallocate() system
call.
* configure.ac
* src/AbstractDiskWriter.cc
* src/AbstractDiskWriter.h
* src/AbstractSingleDiskAdaptor.cc
* src/BinaryStream.h
* src/BtCheckIntegrityEntry.cc
* src/ByteArrayDiskWriter.h
* src/CheckIntegrityEntry.cc
* src/CheckIntegrityEntry.h
* src/DefaultPieceStorage.cc
* src/DiskAdaptor.cc
* src/DiskAdaptor.h
* src/DiskWriter.h
* src/FallocFileAllocationIterator.cc
* src/FallocFileAllocationIterator.h
* src/FileAllocationEntry.cc
* src/FileAllocationEntry.h
* src/Makefile.am
* src/MultiFileAllocationIterator.cc
* src/MultiFileAllocationIterator.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/StreamCheckIntegrityEntry.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/FallocFileAllocationIteratorTest.cc
* test/Makefile.am
Added an option to specify the interval between tracker
requests.
If non-zero value is specified, aria2 uses it and ignores the
interval value in the response of tracker. If zero is specified,
aria2 determines the inteval value based on the tarcker response
and download progress.
* src/DefaultBtAnnounce.cc
* src/DefaultBtAnnounce.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --dry-run option. In this mode, aria2 just checks whether
the remote file is available and doesn't download data. This
option has effect on HTTP/FTP downloads and BitTorrent downloads
are canceled in this mode.
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/HttpResponseCommand.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroupMan.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Don't reset URI in retry to avoid additional round trips because
of redirects.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
Added --index-out option to specify each file path for torrent.
Here index shown in --show-files option is used to specify which
file path should be altered. For example, to change the file
path with index=2, use --index-out=2=aria2.tar.bz2. You can use
this option multiple times: --index-out=1=aria2.tar.bz2
--index-out=2=aria2-opt.tar.bz2. The short hand form -O is also
available. This option can be specified in -i list.
* src/DefaultBtContext.cc
* src/DefaultBtContext.h
* src/MultiDiskAdaptor.cc
* src/MultiDiskAdaptor.h
* src/MultiFileAllocationIterator.cc
* src/OptionHandlerFactory.cc
* src/OptionHandlerImpl.h
* src/Util.cc
* src/Util.h
* src/download_helper.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtContextTest.cc
* test/MultiDiskAdaptorTest.cc
* test/MultiFileAllocationIteratorTest.cc
* test/UtilTest.cc
Added --max-overall-download-limit option. Now
--max-upload-limit option is not ignored when
--max-overall-upload-limit option has non-zero value. aria2
checks download(upload) speed in the order:
first checks overall speed limit and if it is not exceeded, then
checks speed limit per download. Thus you can specify both
value. For example, set --max-overall-download-limit=1M and
--max-download-limit=500K to prevent from one download from
eating all overall speed limit.
* src/DefaultBtInteractive.cc
* src/DefaultBtInteractive.h
* src/DefaultBtMessageDispatcher.cc
* src/DefaultBtMessageDispatcher.h
* src/DownloadCommand.cc
* src/DownloadCommand.h
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/PeerInteractionCommand.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtMessageDispatcherTest.cc
Added --http-auth-challenge option. If it is set to true(by
default), aria2 sends HTTP authorization header only when it is
requested by the server. If false is set, then authorization
header is always sent to the server. This is useful for servers
that don't respond 401 code when authentication is required.
There is an exception: if username and password are embedded in
URI, authorization header is always sent to the server
regardless of this option.
* src/AuthConfigFactory.cc
* src/HttpSkipResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/AuthConfigFactoryTest.cc
* test/HttpRequestTest.cc
Added --bt-external-ip option. You can specify the external IP
address to report to a BitTorrent tracker. Although this
function is named 'external', it can accept any kind of IP
addresses.
* src/DefaultBtAnnounce.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultBtAnnounceTest.cc
Added experimental built-in HTTP server. Currently, when a
client accesses to the server, it responds with the current
download progress. By default, it is disabled. To enable the
server, give --enable-http-server option. To change the default
port number for the server to listen to, use
--http-server-listen-port option.
The response HTML is very simple and refreshes it self each 1
second. Because of this refresh, you see flicker in normal web
browser such as Firefox. I recommend to use console-based
browser such as elinks, w3m. To connect to the server, run
'elinks http://localhost:6800/' while running aria2. Please
replace port number '6800'(which is default) with your
preference.
* src/DownloadEngineFactory.cc
* src/HttpHeader.cc
* src/HttpHeader.h
* src/HttpHeaderProcessor.cc
* src/HttpHeaderProcessor.h
* src/HttpListenCommand.cc
* src/HttpListenCommand.h
* src/HttpServer.cc
* src/HttpServer.h
* src/HttpServerCommand.cc
* src/HttpServerCommand.h
* src/HttpServerResponseCommand.cc
* src/HttpServerResponseCommand.h
* src/Makefile.am
* src/OptionHandlerFactory.cc
* src/Util.cc
* src/Util.h
* src/help_tags.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/HttpHeaderProcessorTest.cc
* test/UtilTest.cc
Added --bt-max-peers option to specify the maximum number of
peers per torrent. 0 means unlimited number of peers.
* src/ActivePeerConnectionCommand.cc
* src/BtRuntime.h
* src/DefaultPeerStorage.cc
* src/DefaultPeerStorage.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/DefaultPeerStorageTest.cc
Added --bt-hash-check-seed option. If true is given to this
option, after hash check using --check-integrity option and file
is complete, continue to seed file. If you want to check file
and download it only when it is damaged or incomplete, set this
option to false. This option has effect only on BitTorrent
download. The default value is true(This is the same behavior
with the previous release).
* src/BtCheckIntegrityEntry.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --event-poll option to select the method for polling
events.
The available methods are "select" and "epoll". "epoll" is
available on Linux only. The earlier release has the compile
option to choose from these methods.
* configure.ac
* src/RequestGroupMan.cc
* src/OptionHandlerFactory.cc
* src/EpollEventPoll.h
* src/StreamFileAllocationEntry.cc
* src/a2io.h
* src/SelectEventPoll.h
* src/option_processing.cc
* src/prefs.h
* src/EpollEventPoll.cc
* src/EventPoll.h
* src/SocketCore.h
* src/Makefile.am
* src/main.cc
* src/DownloadEngine.h
* src/SelectEventPoll.cc
* src/DownloadEngine.cc
* src/SocketCore.cc
* src/DownloadEngineFactory.cc
* src/Makefile.in
* src/prefs.cc
* src/usage_text.h
Applied AdaptiveURISelector patch from Aurelien Lefebvre. This
patch adds AdaptiveURISelector, which selects one of the bests
mirrors for first and reserved connections. For supplementary
ones, it returns mirrors which has not been tested yet, and if
each of them already tested, returns mirrors which has to be
tested again. Otherwise, it doesn't return anymore mirrors.
* src/AdaptiveURISelector.cc
* src/AdaptiveURISelector.h
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/Makefile.am
* src/Makefile.in
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/ServerStat.cc
* src/ServerStat.h
* src/ServerStatMan.cc
* src/SpeedCalc.cc
* src/URISelector.h
* src/prefs.cc
* src/prefs.h
* test/RequestGroupManTest.cc
* test/ServerStatManTest.cc
* test/ServerStatTest.cc
Added --use-head option to toggle whether HEAD method should be
used in the first HTTP request. By default aria2 uses HEAD
method as the first request. When the server doesn't recognize
HEAD, then give aria2 --use-head=false to force aria2 to use GET
method instead.
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --max-overall-upload-limit option. This option limits the
overall upload speed. Stated in help message that the existing
--max-upload-limit option limits the upload speed per each
torrent. Man page is also updated.
* doc/aria2c.1.txt
* src/DefaultBtMessageDispatcher.cc
* src/DefaultBtMessageDispatcher.h
* src/OptionHandlerFactory.cc
* src/PeerInteractionCommand.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --no-proxy option. It receives comman separated hostname
or domains to which proxy should not be used.
aria2 honors the environment variable no_proxy to override
no-proxy value in configuration file. The user can override the
environment variable no_proxy with --no-proxy command-line
option.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added the ability to verify peer in SSL/TLS using given CA
certificates.
The CA certificates are specified in --ca-certificate option.
By default, the verification is disabled. Use --check-certificate
option to enable it.
* src/HttpRequestCommand.cc
* src/LibgnutlsTLSContext.cc
* src/LibgnutlsTLSContext.h
* src/LibsslTLSContext.cc
* src/LibsslTLSContext.h
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/SocketCore.cc
* src/SocketCore.h
* src/a2functional.h
* src/message.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added client certificate authentication for SSL/TLS.
Currently a private key must be decrypted for use with aria2.
If a user accidentally gives encrypted file to aria2 then
following thing happens:
If encrypted private key is given to aria2, it behaves
differently depending on the ssl library it uses. If aria2 built
with openssl then openssl prompts the user for password.
If aria2 build with gnutls then aria2 exists with error at start up.
* src/DownloadEngineFactory.cc
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Use netrc for HTTP.
Now FTP user/password is sent in Authorization header when
--ftp-via-http-proxy=get is given.
* src/AuthConfigFactory.cc
* src/HttpRequest.cc
* src/HttpRequest.h
* src/NetrcAuthResolver.cc
* src/NetrcAuthResolver.h
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/AuthConfigFactoryTest.cc
* test/HttpRequestTest.cc
* test/NetrcAuthResolverTest.cc
Added --max-file-not-found=NUM option. If aria2 receives `file
not
found' error from HTTP/FTP server NUM times without getting
single
bytes of data, then force the download to fail.
Basically aria2 tris all URIs available. So if long list of URIs
are
specified in Metalink, then aria2 will take a long time to fail
eventually if all URIs are outdated. This option eases this
situation
to limit the number of servers to try.
* src/FtpNegotiationCommand.cc
* src/HelpItemFactory.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/PeerStat.h
* src/RequestGroup.cc
* src/RequestGroup.h
* src/SegmentMan.cc
* src/SegmentMan.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added --connect-timeout option to specify connect timeout in
seconds.
This option is in effect for HTTP/FTP/proxy server. The timeout
for
connecting to BitTorrent peer is not controlled by this option.
* src/AbstractProxyRequestCommand.cc
* src/FtpNegotiationCommand.cc
* src/HelpItemFactory.cc
* src/HttpRequestCommand.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Implemented the ability to get timestamp from remote HTTP server
and
apply it to local file. To enable this feature, --remote-time
option
is added. No usage text has been written yet.
If several servers returns difference timestamp, then aria2 uses
latest
one.
* src/CopyDiskAdaptor.cc
* src/CopyDiskAdaptor.h
* src/DirectDiskAdaptor.cc
* src/DirectDiskAdaptor.h
* src/DiskAdaptor.h
* src/File.cc
* src/File.h
* src/HttpHeader.cc
* src/HttpHeader.h
* src/HttpResponse.cc
* src/HttpResponse.h
* src/HttpResponseCommand.cc
* src/HttpResponseCommand.h
* src/MultiDiskAdaptor.cc
* src/MultiDiskAdaptor.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/CopyDiskAdaptorTest.cc
* test/FileTest.cc
* test/Makefile.am
* test/Makefile.in
* test/MultiDiskAdaptorTest.cc
* test/TestUtil.cc
Added options to load/save the server's performance/status to a
file
and the timeout to drop their data.
--server-stat-of=FILE specifies the file to which performance
data
is saved.
--server-stat-if=FILE specifies the file to read previously
saved
by --server-stat-of option. Might be used with
--uri-selector=feedback.
--server-stat-timeout=TIMEOUT specifies timeout to invalidate
the data.
TIMEOUT is specified in seconds and the default value is
24hours.
* src/MultiUrlRequestInfo.cc
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/ServerStatMan.cc
* src/ServerStatMan.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/ServerStatManTest.cc
Implemented download speed based URI selection algorithm.
Introduced new option --uri-selector.
If --uri-selector=feedback is given, aria2 uses download speed
observed
in the previous downloads and chooses fastest server in the URI
list.
Currently at most 10 URIs are considered to introduce
randomeness for
finding better servers. The speed is average download speed in
the
downloads.
On the other hand, if --uri-selector=inorder is given, which is
default,
URI is tried in order in URI list.
The usage text for the new option has not been written yet.
* src/AbstractCommand.cc
* src/DownloadCommand.cc
* src/DownloadEngine.cc
* src/DownloadEngineFactory.cc
* src/InOrderURISelector.cc
* src/InOrderURISelector.h
* src/OptionHandlerFactory.cc
* src/PeerStat.h
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/SegmentMan.cc
* src/SegmentMan.h
* src/ServerStat.cc
* src/ServerStat.h
* src/ServerStatMan.cc
* src/ServerStatMan.h
* src/ServerStatURISelector.cc
* src/ServerStatURISelector.h
* src/URISelector.h
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* test/InOrderURISelectorTest.cc
* test/RequestGroupManTest.cc
* test/ServerStatManTest.cc
* test/ServerStatURISelectorTest.cc
Renamed --bt-seed option as --bt-seed-unverified so that it
makes clear
that this is not going to verify files using piece hashes.
* src/HelpItemFactory.cc
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Defined option name and possible values as std::string to reduce
temporary string object creation in runtime.
* src/HelpItemFactory.cc
* src/LogFactory.cc
* src/Option.cc
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.cc
* src/prefs.h
Print download progress summary of all parallel downloads in specified
interval, default 60 secs. While aria2 could download several files
in parallel (see -j option), it displayed just first download progress,
and the other downloads are hidden from the users. This new feature
prints all downloads currently in-progress to the console so that you
can check the status of all downloads. The interval can be adjusted
by --summary-interval option.
The progress readout is now cut so that all fits in the one line of
console.
* src/ConsoleStatCalc.cc
* src/ConsoleStatCalc.h
* src/HelpItemFactory.cc
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/main.cc
* src/option_processing.cc
* src/prefs.h
* src/usage_text.h
Added the ability to reuse connection in FTP and it is enabled
by
default. It can be disabled by --ftp-reuse-connection=false
option.
* src/Command.cc
* src/DownloadCommand.cc
* src/FtpDownloadCommand.cc
* src/FtpDownloadCommand.h
* src/FtpFinishDownloadCommand.cc
* src/FtpFinishDownloadCommand.h
* src/FtpInitiateConnectionCommand.cc
* src/FtpNegotiationCommand.cc
* src/FtpNegotiationCommand.h
* src/HelpItemFactory.cc
* src/Makefile.am
* src/Makefile.in
* src/OptionHandlerFactory.cc
* src/option_processing.cc
* src/prefs.h
* src/usage_text.h
Added --quiet option to make aria2 quiet (no console output).
--quiet option is tagged with ADVANCED.
* src/HelpItemFactory.cc
* src/LogFactory.cc
* src/LogFactory.h
* src/MultiUrlRequestInfo.cc
* src/MultiUrlRequestInfo.h
* src/NullStatCalc.h: New class. This class prints nothing.
* src/OptionHandlerFactory.cc
* src/main.cc
* src/option_processing.cc
* src/prefs.h
* src/usage_text.h
Added the ability to stop aria2 itself when given time has
passed
from start. Use --stop option to specify time in minutes.
When 0 is given, this feature is disabled.
* src/OptionHandlerFactory.cc
* src/TimeBasedCommand.h: Make _interval protected scope.
* src/HelpItemFactory.cc
* src/option_processing.cc
* src/prefs.h
* src/FillRequestGroupCommand.cc: Evaluate _e->isHaltRequested()
before calling RequestGroupMan::fillRequestGroupFromReserver().
Without this modification, the result list shows "ERR" when
aria2 is
stopped by --stop option. It should be "INPR".
* src/DownloadEngine.{h, cc}
* src/DownloadEngineFactory.cc
* src/usage_text.h
* src/TimedHaltCommand.{h, cc}: New class.
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
Added --no-conf and --conf-path command-line option.
--no-conf option disables loading aria2.conf file.
--conf-path option changes the configuration file path. The
default
file path is $HOME/.aria2/aria2.conf
Added a warning message when the configuration file is not
found.
* src/HelpItemFactory.cc
* src/option_processing.cc
* src/prefs.h
* src/usage_text.h
Added uTorrent compatible Peer Exchange.
* src/BencodeVisitor.{h, cc}
* test/BencodeVisitorTest.cc
* src/BtConstants.h
* src/BtContext.h: Added 'private' flag.
* src/BtExtendedMessage.{h, cc}
* test/BtExtendedMessageTest.cc
* src/BtHandshakeMessage.{h, cc}: Set extended messaging bit in
reserved field.
* test/BtHandshakeMessageTest.cc
* src/BtMessageFactory.h
* src/BtRegistry.h
* src/BtRuntime.h: This class holds default extension message
IDs for
aria2. By default, aria2 uses ID 8 for ut_pex.
* src/DefaultBtContext.cc
* src/DefaultBtInteractive.{h, cc}: This class holds
_utPexEnabled.
When it is true, aria2 enables ut_pex. This value is set by
PeerInteractionCommand.
* src/DefaultBtMessageFactory.{h, cc}
* test/DefaultBtMessageFactoryTest.cc
* src/DefaultBtMessageReceiver.cc: Moved the code of fast
extension
handling to DefaultBtInteractive class.
* src/DefaultExtensionMessageFactory.{h, cc}
* test/DefaultExtensionMessageFactoryTest.cc
* src/DefaultPeerStorage.cc: Returns false if a peer is already
in
the container(peers and incomingPeers. The equality is
determined by
Peer::id).
* test/DefaultPeerStorageTest.cc
* src/ExtensionMessage.h
* test/MockExtensionMessage.h
* src/ExtensionMessageFactory.h
* test/MockExtensionMessageFactory.h
* src/HandshakeExtensionMessage.{h, cc}
* test/HandshakeExtensionMessageTest.cc
* src/MetaEntry.h
* src/Peer.{h, cc}
* src/PeerInteractionCommand.cc
* src/PeerReceiveHandshakeCommand.cc: Evaluate the return value
of
addIncomingPeer.
* src/PeerMessageUtil.{h, cc}
* src/PeerObject.h
* src/UTPexExtensionMessage.{h, cc}
* test/UTPexExtensionMessageTest.cc
* src/message.h
* src/prefs.h
Fixed the bug that returns incomplete data when it contains null
character. A convenient constructor was also added.
* src/Data.{h, cc}
Rewritten.
* src/CompactPeerListProcessor.cc
Fixed typos.
* src/message.h
* src/MetaFileUtil.cc
If several protocols are available for a mirror, aria2 now use
one of
them. --metalink-preferred-protocol option was added to specify
the
preference of protocol.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/ServerHost.{h, cc}
* src/Metalink2RequestGroup.cc
* src/RequestGroup.{h, cc}
* test/RequestGroupTest.cc
* src/option_processing.cc
* src/prefs.h
* src/HttpResponseCommand.cc
* src/MetalinkResource.{h, cc}
* src/FtpNegotiationCommand.cc
* src/MetalinkEntry.{h, cc}
* src/MetalinkEntryTest.cc
Added direct I/O support. The current implementation uses O_DIRECT,
which is not posix standard and is tested on linux 2.6.21.
Currently only file allocation uses direct I/O.
* src/SingleFileAllocationIterator.{h, cc}
* test/SingleFileAllocationIteratorTest.cc
* src/MultiFileAllocationIterator.{h, cc}
* test/MultiFileAllocationIteratorTest.cc
* src/BinaryStream.h
* src/DiskWriter.h
* src/AbstractDiskWriter.{h, cc}
* src/ByteArrayDiskWriter.h
* src/DiskAdaptor.h
* src/AbstractSingleDiskAdaptor.{h, cc}
* src/MultiDiskAdaptor.{h, cc}
* src/FileAllocationEntry.cc
* src/Util.{h, cc}
* src/OptionHandlerFactory.cc
* src/prefs.h
* src/version_usage.cc
* src/option_processing.cc
Moved FileAllocationMan::markCurrentFileAllocationEntryDone() to
handleException.
* src/MultiFileAllocationIterator.cc
Added EINTR handling
* src/SocketCore.cc
Tatsuhiro Tsujikawa