* src/Util.{h, cc}
(parseUInt): New function.
(alphaToNum): Now returns unsigned int and 0 when overflow
detected.
The actual range is uint32_t.
* test/UtilTest.cc
* src/ParameterizedStringParser.cc:
Use Util::parseUInt() for loop variables.
* test/ParameterizedStringParserTest.cc
* src/PStringNumLoop.h: Make _startValue and _endValue unsigned
int.
Type clarification
* src/PeerSessionResource.{h, cc}
* src/DefaultPieceStorage.{h, cc}
* src/Peer.{h, cc}
* test/PeerSessionResourceTest.cc
Use div function
* src/BtPieceMessage.cc (erasePieceOnDisk)
Updated Makfefile.am to make 'make dist' work.
Now packaged filename is aria2c-VERSION.tar.bz2.
Added README, README.html, and aria2c.1.html to dist_doc_DATA.
Added LICENSE.OpenSSL to dist_noinst_DATA.
Large file support is now configured by configure script.
* configure.ac
Removed unsused source files
* src/
* test/
Removed PeerDecl.h and BtContextDecl.h. typedefs are removed to
Peer.h and BtContext.h respectively.
* src/Peer.h
* src/BtContext.h
Updated translations.
Added Polish, Thai, Indonesian, Norwegian Nynorsk, Hungarian
translations. Great thanks to all translators!;)
* po/*.{po, gmo}
Fixed the bug that DH key exchange sometimes fails due to bad
handling
of the number of bytes required for storing public key and
shared
secret.
* src/LibgcryptDHKeyExchange.h
* src/LibsslDHKeyExchange.h: Also added function name to
handleError.
* src/MSEHandshake.cc
* test/DHKeyExchangeTest.cc
Make room for future enchancements for IPv6 addresses.
Bump up version number of dht.dat file format to 2.
Not compatible with previous version.
* src/DHTRoutingTableSerializer.cc
* src/DHTRoutingTableDeserializer.cc
* test/DHTRoutingTableSerializerTest.cc
IPv6 support for SocketCore class.
TODO: In SocketCore::establishConnection(), this is insufficient
to
determin the failure of connect() here because the socket is
non-blocking state. The next addresses should be tried after
select().
TODO: NameResolver still uses c-ares(<= 1.4)
ares_gethostbyname().
If c-ares 1.5 or newer is installed, ares_getaddrinfo() should
be used
instead which address family independent.
TODO: DHTRoutingTable{Deserializer,Serializer} currently saves
peer
information in a compact peer format which is for IPv4 only.
Some BitTorrent functions in PeerMessageUtil still depends on
IPv4 but
this is a spec of BitTorrent protocol.
* src/SocketCore.{h, cc}
* src/PeerMessageUtil.cc
* test/SocketCoreTest.cc
* test/PeerMessageUtilTest.cc
* test/DHTConnectionImplTest.cc
Handle IPv4-mapped addresses.
* src/DHTNode.cc: Now identity is determined by node id.
* src/DHTMessageTrackerEntry.cc
Because now PeerMessageUtil::unpackcompact() could fail, the
caller
should handle it.
* src/DHTRoutingTableDeserializer.cc
* src/DHTMessageFactoryImpl.cc
Added the ability to load nodes from torrent file. These nodes are
added to the routing table when downloading that torrent.
* src/BtContext.h
* src/DefaultBtContext.{h, cc}
* src/DHTSetup.cc
* src/DHTEntryPointNameResolveCommand.{h, cc}: Now accepts list of
hostname and port pair, and resolves all of them.
* src/NameResolver.{h, cc}: Added reset().
* src/RequestGroup.cc
* test/DefaultBtContextTest.cc
* test/MockBtContext.h
Removed assert() from DefaultBtContext and throw exception instead.
* src/DefaultBtContext.cc
Bootstrap through node added by port message.
Currently bootstrap is executed if the number of buckets in routing
table is 1.
* src/BtPortMessage.{h, cc}
* src/DefaultBtMessageFactory.{h, cc}
* src/PeerInteractionCommand.cc
* test/BtPortMessageTest.cc
* test/MockDHTTask.h
Extract the Peer class's member variables, which are only needed
after
PeerInteractionCommand, into PeerSessionResource class.
This class is instantiated in PeerInteractionCommand class's
ctor and
released in its dtor.
This will make Peer class lightweight and uses less memory for
peers
which are not connected and wait in the queue.
* src/PeerChokeCommand.cc
* src/PeerSessionResource.{h, cc}
* src/PeerInteractionCommand.cc
* src/PeerAbstractCommand.cc: Note: 0 is given to onAbort()
function.
* src/DefaultBtInteractive.cc
* src/BtPieceMessage.cc
* src/BtInterestedMessage.cc
* src/BtUnchokeMessage.cc
* src/DefaultPeerStorage.{h, cc}
* src/PeerInitiateConnectionCommand.cc
* src/ActivePeerConnectionCommand.cc
* src/BtNotInterestedMessage.cc
* src/DefaultBtMessageDispatcher.cc
* src/BtChokeMessage.cc
* src/BtRequestMessage.cc
* src/Peer.{h, cc}
* src/BtRegistry.h
* src/TrackerWatcherCommand.cc
* src/PeerReceiveHandshakeCommand.cc
* test/BtExtendedMessageTest.cc
* test/BtAllowedFastMessageTest.cc
* test/BtCancelMessageTest.cc
* test/DefaultPieceStorageTest.cc
* test/BtBitfieldMessageTest.cc
* test/BtHaveMessageTest.cc
* test/BtNotInterestedMessageTest.cc
* test/BtRequestMessageTest.cc
* test/PeerSessionResourceTest.cc
* test/DefaultBtMessageDispatcherTest.cc
* test/PeerTest.cc
* test/BtInterestedMessageTest.cc
* test/BtRejectMessageTest.cc
* test/BtChokeMessageTest.cc
* test/DefaultPeerStorageTest.cc
* test/BtHaveNoneMessageTest.cc
* test/BtHaveAllMessageTest.cc
* test/DefaultExtensionMessageFactoryTest.cc
* test/BtUnchokeMessageTest.cc
* test/DefaultBtMessageFactoryTest.cc
* test/HandshakeExtensionMessageTest.cc
* test/UTPexExtensionMessageTest.cc
* test/DefaultBtRequestFactoryTest.cc
* test/BtPieceMessageTest.cc
Removed typedef PeerStats.
* src/PeerStat.h
* src/SegmentMan.cc
Commented out ip address comparison because a host can have
multiple
ip addresses and it is hard to predict the hostname is resolved
into
which one.
* test/SocketCoreTest.cc (testWriteAndReadDatagram)
Fixed compiler warning about redefinition of SIZE_MAX.
Use common.h instead of config.h directly here.
* src/Platform.{h, cc}
The check of ENABLE_NLS is made in gettext.h, so it is not
required
here.
* common.h
2008-02-02 gettextize <bug-gnu-gettext@gnu.org>
Updated gettext related files.
* configure.ac (AC_CONFIG_FILES): Add intl/Makefile.
* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
Added the message to inform users that other help categories are
available in -h option.
* src/version_usage.cc
* src/TagContainer.{h, cc}
* test/TagContainerTest.cc
* src/TaggedItem.{h, cc}
* test/TaggedItemTest.cc
* src/HelpItem.h
Rewritten get*Missing*Index functions. Now no need to allocate
memory
each time these functions are called.
* src/BitfieldMan.{h, cc}
* test/BitfieldManTest.cc
* src/array_fun.h
* test/array_funTest.cc
Now BitfieldMan::countBlock() returns BitfieldMan::blocks.
Added new BitfieldMan::countFilteredBlock() to get the number of
blocks
filtered. Removed unnecessary cast to int32_t.
* src/BitfieldMan.{h, cc}
Fixed the bug that DefaultPeerStorage::returnPeer() may delete wrong
peer if there are peers that have same ipaddr and port.
I've experiened segmentation fault and "pure virtual function was
called" error.
* src/Peer.h
* test/PeerTest.cc
* src/DefaultPeerStorage.cc
* test/DefaultPeerStorageTest.cc
Fixed the bug that always first found Segment is removed from
usedSegmentEntries. Removed unused functions.
* src/SegmentMan.{h, cc}
* test/SegmentManTest.cc
Fixed the bug that ServerHost is not removed.
* src/RequestGroup.cc
Move extension from BtRuntime to ExtensionMessageFactory, because
extension can be specified per peer, not per torrent.
* src/DefaultBtInteractive.cc
* src/BtRuntime.h
* src/ExtendedMessagingAware.h
* src/ExtensionMessageFactory.h
* src/DefaultExtensionMessageFactory.cc
* test/DefaultExtensionMessageFactoryTest.cc
Fixed segmentation fault when bad torrent metainfo is parsed.
Added dynamic_cast properly to detect the misconfiguration of
metainfo
and then throw exception or skip it.
* src/DefaultBtContext.{h, cc}
* test/DefaultBtContextTest.cc
* src/AnnounceList.cc
* src/CompactPeerListProcessor.cc
* src/message.h
* src/DefaultBtAnnounce.{h, cc}
* test/DefaultBtAnnounceTest.cc
* src/BencodeVisitor.cc
Allocate bitfield in Peer when it is really used. More
specifically,
bitfield in Peer is allocated after the connection is
established and
deallocated when the connection is dropped.
Since 2 parameters(piece length and total length) was removed
from the
constructor of Peer class, many test classes were modified
accordingly.
See svn log for more detailed information.
* src/PeerInteractionCommand.cc
* src/CompactPeerListProcessor.cc
* src/Peer.cc
* src/DefaultPeerListProcessor.cc
* src/PeerListenCommand.cc
* src/PeerReceiveHandshakeCommand.cc
Fixed memory leak
* src/Piece.cc
Removed incomingPeer. Set 0 to peer's port if it is not a listening
port.
* src/DefaultPeerStorage.{h, cc}
* test/DefaultPeerStorageTest.cc
* src/HandshakeExtensionMessage.cc
* test/HandshakeExtensionMessageTest.cc
* src/Peer.{h, cc}: Added ipaddr and port to identity comparison.
* src/PeerStorage.h
* test/MockPeerStorage.h
* src/PeerListenCommand.cc
Added uTorrent compatible Peer Exchange.
* src/BencodeVisitor.{h, cc}
* test/BencodeVisitorTest.cc
* src/BtConstants.h
* src/BtContext.h: Added 'private' flag.
* src/BtExtendedMessage.{h, cc}
* test/BtExtendedMessageTest.cc
* src/BtHandshakeMessage.{h, cc}: Set extended messaging bit in
reserved field.
* test/BtHandshakeMessageTest.cc
* src/BtMessageFactory.h
* src/BtRegistry.h
* src/BtRuntime.h: This class holds default extension message
IDs for
aria2. By default, aria2 uses ID 8 for ut_pex.
* src/DefaultBtContext.cc
* src/DefaultBtInteractive.{h, cc}: This class holds
_utPexEnabled.
When it is true, aria2 enables ut_pex. This value is set by
PeerInteractionCommand.
* src/DefaultBtMessageFactory.{h, cc}
* test/DefaultBtMessageFactoryTest.cc
* src/DefaultBtMessageReceiver.cc: Moved the code of fast
extension
handling to DefaultBtInteractive class.
* src/DefaultExtensionMessageFactory.{h, cc}
* test/DefaultExtensionMessageFactoryTest.cc
* src/DefaultPeerStorage.cc: Returns false if a peer is already
in
the container(peers and incomingPeers. The equality is
determined by
Peer::id).
* test/DefaultPeerStorageTest.cc
* src/ExtensionMessage.h
* test/MockExtensionMessage.h
* src/ExtensionMessageFactory.h
* test/MockExtensionMessageFactory.h
* src/HandshakeExtensionMessage.{h, cc}
* test/HandshakeExtensionMessageTest.cc
* src/MetaEntry.h
* src/Peer.{h, cc}
* src/PeerInteractionCommand.cc
* src/PeerReceiveHandshakeCommand.cc: Evaluate the return value
of
addIncomingPeer.
* src/PeerMessageUtil.{h, cc}
* src/PeerObject.h
* src/UTPexExtensionMessage.{h, cc}
* test/UTPexExtensionMessageTest.cc
* src/message.h
* src/prefs.h
Fixed the bug that returns incomplete data when it contains null
character. A convenient constructor was also added.
* src/Data.{h, cc}
Rewritten.
* src/CompactPeerListProcessor.cc
Fixed typos.
* src/message.h
* src/MetaFileUtil.cc
Fixed the bug that prevents aria2 from loading cookie file when
expire
value is greater than 2^31-1. BUG#1851066
* src/CookieBoxFactory.cc
* test/CookieBoxFactoryTest.cc
Fixed possible memory leak when an exception is thrown.
* src/XML2SAXMetalinkProcessor.cc
Added Expat support. If both libxml2 and Expat are installed,
then
libxml2 is used by default.
MetalinkProcessorFactory chooses from XML2SAXMetalinkProcessor
and
ExpatMetalinkProcessor according to the configuration.
* src/ExpatMetalinkProcessor.{h, cc}
* src/main.cc: Removed libxml2 specific header and init/free
function.
* src/MetalinkProcessorFactory.{h, cc}
* src/MetalinkHelper.cc
* src/Metalinker.h: Removed unnecessary libxml2 header.
* src/MetalinkProcessor.h
* test/XML2SAXMetalinkProcessorTest.cc: Removed because
MetalinkProcessorTest is used instead.
* test/MetalinkProcessorTest.cc: Added. It is actually the same
with
XML2SAXMetalinkProcessor, replaced XML2SAXMetalinkProcessor with
MetalinkProcessorFactory::newInstance().
* m4/libexpat.m4
* configure.ac: Added configuration options for libexpat.
If several protocols are available for a mirror, aria2 now use
one of
them. --metalink-preferred-protocol option was added to specify
the
preference of protocol.
* src/AbstractCommand.cc
* src/OptionHandlerFactory.cc
* src/ServerHost.{h, cc}
* src/Metalink2RequestGroup.cc
* src/RequestGroup.{h, cc}
* test/RequestGroupTest.cc
* src/option_processing.cc
* src/prefs.h
* src/HttpResponseCommand.cc
* src/MetalinkResource.{h, cc}
* src/FtpNegotiationCommand.cc
* src/MetalinkEntry.{h, cc}
* src/MetalinkEntryTest.cc
Tatsuhiro Tsujikawa