2010-01-06 Tatsuhiro Tsujikawa <t-tujikawa@users.sourceforge.net>

Updated autoconf/automake auxiliary files.
	* INSTALL
	* config.guess
	* config.sub
	* depcomp
	* install-sh
	* m4/intldir.m4
	* missing
	* mkinstalldirs

ChangeLog

@@ -1,3 +1,15 @@
+2010-01-06  Tatsuhiro Tsujikawa  <t-tujikawa@users.sourceforge.net>
+
+	Updated autoconf/automake auxiliary files.
+	* INSTALL
+	* config.guess
+	* config.sub
+	* depcomp
+	* install-sh
+	* m4/intldir.m4
+	* missing
+	* mkinstalldirs
+
 2010-01-06  Tatsuhiro Tsujikawa  <t-tujikawa@users.sourceforge.net>
 
 	Removed unused function.

INSTALL

@@ -1,38 +1,54 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+   Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
 It may also create one or more `.h' files containing system-dependent
 definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
+you can run in the future to recreate the current configuration, and a
-`config.cache' that saves the results of its tests to speed up
+file `config.log' containing compiler output (useful mainly for
-reconfiguring, and a file `config.log' containing compiler output
+debugging `configure').
-(useful mainly for debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
+be considered for the next release.  If you are using the cache, and at
-contains results you don't want to keep, you may remove or edit it.
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
 
-   The file `configure.in' is used to create `configure' by a program
+   The file `configure.ac' (or `configure.in') is used to create
-called `autoconf'.  You only need `configure.in' if you want to change
+`configure' by a program called `autoconf'.  You need `configure.ac' if
-it or regenerate `configure' using a newer version of `autoconf'.
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
+     `./configure' to configure the package for your system.
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
 
-     Running `configure' takes awhile.  While running, it prints some
+     Running `configure' might take a while.  While running, it prints
-     messages telling which features it is checking for.
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -51,52 +67,69 @@ The simplest way to compile this package is:
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
+  6. Often, you can also type `make uninstall' to remove the installed
+     files again.
+
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
+the `configure' script does not know about.  Run `./configure --help'
-initial values for variables by setting them in the environment.  Using
+for details on some of the pertinent environment variables.
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
 
-Or on systems that have the `env' program, you can do it like this:
+   You can give `configure' initial values for configuration parameters
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
+own directory.  To do this, you can use GNU `make'.  `cd' to the
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not supports the `VPATH'
+   With a non-GNU `make', it is safer to compile the package for one
-variable, you have to compile the package for one architecture at a time
+architecture at a time in the source code directory.  After you have
-in the source code directory.  After you have installed the package for
+installed the package for one architecture, use `make distclean' before
-one architecture, use `make distclean' before reconfiguring for another
+reconfiguring for another architecture.
-architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, `make install' will install the package's files in
+   By default, `make install' installs the package's commands under
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
-installation prefix other than `/usr/local' by giving `configure' the
+can specify an installation prefix other than `/usr/local' by giving
-option `--prefix=PATH'.
+`configure' the option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PATH as the prefix for installing programs and libraries.
+PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -119,25 +152,68 @@ find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' can not figure out
+   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of host the package
+automatically, but needs to determine by the type of machine the package
-will run on.  Usually `configure' can figure that out, but if it prints
+will run on.  Usually, assuming the package is built to be run on the
-a message saying it can not guess the host type, give it the
+_same_ architectures, `configure' can figure that out, but if it prints
-`--host=TYPE' option.  TYPE can either be a short name for the system
+a message saying it cannot guess the machine type, give it the
-type, such as `sun4', or a canonical name with three fields:
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
      CPU-COMPANY-SYSTEM
 
-See the file `config.sub' for the possible values of each field.  If
+where SYSTEM can have one of these forms:
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
 
-   If you are building compiler tools for cross-compiling, you can also
+     OS
-use the `--target=TYPE' option to select the type of system they will
+     KERNEL-OS
-produce code for and the `--build=TYPE' option to select the type of
+
-system on which you are compiling the package.
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
 
 Sharing Defaults
 ================
@@ -150,19 +226,55 @@ default values for variables like `CC', `cache_file', and `prefix'.
 `CONFIG_SITE' environment variable to the location of the site script.
 A warning: not all `configure' scripts look for a site script.
 
-Operation Controls
+Defining Variables
 ==================
 
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
    `configure' recognizes the following options to control how it
 operates.
 
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
 `--help'
-     Print a summary of the options to `configure', and exit.
+`-h'
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
 
 `--quiet'
 `--silent'
@@ -175,8 +287,16 @@ operates.
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
-`--version'
+`--prefix=DIR'
-     Print the version of Autoconf used to generate the `configure'
+     Use DIR as the installation prefix.  *Note Installation Names::
-     script, and exit.
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
 
-`configure' also accepts some other, not widely useful, options.

config.sub

@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   Free Software Foundation, Inc.
 
-timestamp='2003-07-17'
+timestamp='2009-06-11'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +22,15 @@ timestamp='2003-07-17'
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# Boston, MA 02111-1307, USA.
+# 02110-1301, USA.
-
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
 #
@@ -70,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -83,11 +85,11 @@ Try \`$me --help' for more information."
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -99,7 +101,7 @@ while test $# -gt 0 ; do
     *local*)
        # First pass through any local machine types.
        echo $1
-       exit 0;;
+       exit ;;
 
     * )
        break ;;
@@ -118,7 +120,10 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -144,10 +149,13 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis)
+	-apple | -axis | -knuth | -cray)
 		os=
 		basic_machine=$1
 		;;
+        -bluegene*)
+	        os=-cnk
+		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
 		basic_machine=$1
@@ -169,6 +177,10 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -185,6 +197,10 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -229,44 +245,56 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m68000 | m68k | m88k | mcore \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
+	| mips64octeon | mips64octeonel \
 	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| strongarm \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k)
+	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
@@ -276,6 +304,9 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -295,54 +326,67 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
+	| avr-* | avr32-* \
-	| bs2000-* \
+	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | cydra-* \
+	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
+	| mips64octeon-* | mips64octeonel-* \
 	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
 	| msp430-* \
-	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+	| nios-* | nios2-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xtensa-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
-	| z8k-*)
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -360,6 +404,9 @@ case $basic_machine in
 		basic_machine=a29k-amd
 		os=-udi
 		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
 	adobe68k)
 		basic_machine=m68010-adobe
 		os=-scout
@@ -377,6 +424,9 @@ case $basic_machine in
 	amd64)
 		basic_machine=x86_64-pc
 		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	amdahl)
 		basic_machine=580-amdahl
 		os=-sysv
@@ -400,6 +450,10 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -408,10 +462,26 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
+        cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -436,12 +506,27 @@ case $basic_machine in
 		basic_machine=j90-cray
 		os=-unicos
 		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
 	da30 | da30-*)
 		basic_machine=m68k-da30
 		;;
@@ -464,6 +549,14 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -614,6 +707,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -629,6 +730,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -642,10 +747,6 @@ case $basic_machine in
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
 	monitor)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -658,6 +759,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -726,10 +830,6 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
-	nv1)
-		basic_machine=nv1-cray
-		os=-unicosmp
-		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -737,9 +837,12 @@ case $basic_machine in
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
 		;;
 	OSE68000 | ose68000)
 		basic_machine=m68000-ericsson
@@ -757,6 +860,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -766,6 +877,12 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -822,6 +939,10 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -848,6 +969,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -859,6 +984,9 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -948,6 +1076,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -961,6 +1093,10 @@ case $basic_machine in
 	tower | tower-32)
 		basic_machine=m68k-ncr
 		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
 	udi29k)
 		basic_machine=a29k-amd
 		os=-udi
@@ -1004,6 +1140,10 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
@@ -1015,6 +1155,10 @@ case $basic_machine in
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1034,6 +1178,9 @@ case $basic_machine in
 	romp)
 		basic_machine=romp-ibm
 		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
 	rs6000)
 		basic_machine=rs6000-ibm
 		;;
@@ -1050,13 +1197,10 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1123,25 +1267,30 @@ case $os in
 	# Each alternative MUST END IN A *, to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
+	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1159,12 +1308,15 @@ case $os in
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
 		os=`echo $os | sed -e 's|mac|macos|'`
 		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -1177,6 +1329,9 @@ case $os in
 	-opened*)
 		os=-openedition
 		;;
+        -os400*)
+		os=-os400
+		;;
 	-wince*)
 		os=-wince
 		;;
@@ -1198,6 +1353,9 @@ case $os in
 	-atheos*)
 		os=-atheos
 		;;
+	-syllable*)
+		os=-syllable
+		;;
 	-386bsd)
 		os=-bsd
 		;;
@@ -1220,6 +1378,9 @@ case $os in
 	-sinix*)
 		os=-sysv4
 		;;
+        -tpf*)
+		os=-tpf
+		;;
 	-triton*)
 		os=-sysv3
 		;;
@@ -1256,6 +1417,12 @@ case $os in
 	-kaos*)
 		os=-kaos
 		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
 	-none)
 		;;
 	*)
@@ -1278,6 +1445,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1287,9 +1460,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
+        c4x-* | tic4x-*)
-        os=-coff
+        	os=-coff
-        ;;
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1315,6 +1488,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
@@ -1333,9 +1509,15 @@ case $basic_machine in
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
+    	*-knuth)
+		os=-mmixware
+		;;
 	*-wec)
 		os=-proelf
 		;;
@@ -1438,7 +1620,7 @@ case $basic_machine in
 			-sunos*)
 				vendor=sun
 				;;
-			-aix*)
+			-cnk*|-aix*)
 				vendor=ibm
 				;;
 			-beos*)
@@ -1468,9 +1650,15 @@ case $basic_machine in
 			-mvs* | -opened*)
 				vendor=ibm
 				;;
+			-os400*)
+				vendor=ibm
+				;;
 			-ptx*)
 				vendor=sequent
 				;;
+			-tpf*)
+				vendor=ibm
+				;;
 			-vxsim* | -vxworks* | -windiss*)
 				vendor=wrs
 				;;
@@ -1495,7 +1683,7 @@ case $basic_machine in
 esac
 
 echo $basic_machine$os
-exit 0
+exit
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

depcomp

@@ -1,9 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2005-07-09.11
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -16,9 +17,7 @@ scriptversion=2005-07-09.11
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -86,12 +85,34 @@ if test "$depmode" = dashXmstdout; then
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
   stat=$?
   if test $stat -eq 0; then :
   else
@@ -178,14 +199,14 @@ sgi)
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
+' ' ' >> "$depfile"
-    echo >> $depfile
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -201,34 +222,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  tmpdepfile="$stripped.u"
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -276,6 +302,51 @@ icc)
   rm -f "$tmpdepfile"
   ;;
 
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -288,13 +359,13 @@ tru64)
 
    if test "$libtool" = yes; then
       # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
+      # static library.  This mechanism is used in libtool 1.4 series to
       # handle both shared and static libraries in a single compilation.
       # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
       #
       # With libtool 1.5 this exception was removed, and libtool now
       # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # compilations output dependencies in $dir.libs/$base.o.d and
       # in $dir$base.o.d.  We have to check for both files, because
       # one of the two compilations can be disabled.  We should prefer
       # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
@@ -345,7 +416,7 @@ dashmstdout)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -396,32 +467,39 @@ makedepend)
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
+  cleared=no eat=no
-  for arg in "$@"; do
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
@@ -441,7 +519,7 @@ cpp)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -479,13 +557,27 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
+  # always write the preprocessed file to stdout.
-  # because we must use -o when running libtool.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
@@ -498,16 +590,23 @@ msvisualcpp)
 	;;
     esac
   done
-  "$@" -E |
+  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -526,5 +625,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:

install-sh

@@ -1,251 +1,520 @@
 #!/bin/sh
-#
 # install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2009-04-28.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
 #
-# Copyright 1991 by the Massachusetts Institute of Technology
+# Copyright (C) 1994 X Consortium
 #
-# Permission to use, copy, modify, distribute, and sell this software and its
+# Permission is hereby granted, free of charge, to any person obtaining a copy
-# documentation for any purpose is hereby granted without fee, provided that
+# of this software and associated documentation files (the "Software"), to
-# the above copyright notice appear in all copies and that both that
+# deal in the Software without restriction, including without limitation the
-# copyright notice and this permission notice appear in supporting
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# documentation, and that the name of M.I.T. not be used in advertising or
+# sell copies of the Software, and to permit persons to whom the Software is
-# publicity pertaining to distribution of the software without specific,
+# furnished to do so, subject to the following conditions:
-# written prior permission.  M.I.T. makes no representations about the
+#
-# suitability of this software for any purpose.  It is provided "as is"
+# The above copyright notice and this permission notice shall be included in
-# without express or implied warranty.
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
 # `make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
+# from scratch.
-# shared with many OS's install programs.
 
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
-
+if test -z "$doit"; then
-
+  doit_exec=exec
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
 else
-	true
+  doit_exec=$doit
 fi
 
-if [ x"$dir_arg" != x ]; then
+# Put in absolute file names if you don't have them in your path;
-	dst=$src
+# or use environment vars.
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
 
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+chgrpprog=${CHGRPPROG-chgrp}
-# might cause directories to be created, which would be especially bad 
+chmodprog=${CHMODPROG-chmod}
-# if $src (and thus $dsttmp) contains '*'.
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
 
-	if [ -f $src -o -d $src ]
+posix_glob='?'
-	then
+initialize_posix_glob='
-		true
+  test "$posix_glob" != "?" || {
-	else
+    if (set -f) 2>/dev/null; then
-		echo "install:  $src does not exist"
+      posix_glob=
-		exit 1
+    else
-	fi
+      posix_glob=:
-	
+    fi
-	if [ x"$dst" = x ]
+  }
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS=' 	
 '
-IFS="${IFS-${defaultIFS}}"
 
-oIFS="${IFS}"
+posix_mkdir=
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
 
-pathcomp=''
+# Desired mode of installed file.
+mode=0755
 
-while [ $# -ne 0 ] ; do
+chgrpcmd=
-	pathcomp="${pathcomp}${1}"
+chmodcmd=$chmodprog
-	shift
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
 
-	if [ ! -d "${pathcomp}" ] ;
+src=
-        then
+dst=
-		$mkdirprog "${pathcomp}"
+dir_arg=
-	else
+dst_arg=
-		true
-	fi
 
-	pathcomp="${pathcomp}/"
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
 done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
 fi
 
-if [ x"$dir_arg" != x ]
+if test $# -eq 0; then
-then
+  if test -z "$dir_arg"; then
-	$doit $instcmd $dst &&
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+if test -z "$dir_arg"; then
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+  trap '(exit $?); exit' 1 2 13 15
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
 
-# If we're going to rename the final executable, determine the name now.
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
 
-	if [ x"$transformarg" = x ] 
+    *[0-7])
-	then
+      if test -z "$stripcmd"; then
-		dstfile=`basename $dst`
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
 	else
-		dstfile=`basename $dst $transformbasename | 
+	  mkdir_mode=
-			sed $transformarg`$transformbasename
 	fi
 
-# don't allow the sed command to completely eliminate the filename
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-	if [ x"$dstfile" = x ] 
+	    if (umask $mkdir_umask &&
-	then
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-		dstfile=`basename $dst`
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
 	else
-		true
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
 	fi
+	prefix=$prefix/
+      done
 
-# Make a temp file name in the proper directory.
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
 
-	dsttmp=$dstdir/#inst.$$#
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
 
-# Move or copy the file name to the temp name
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
 
-	$doit $instcmd $src $dsttmp &&
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
 
-	trap "rm -f ${dsttmp}" 0 &&
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
-# and set any options; do chmod last to preserve setuid bits
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
 
-# If any of these fail, we abort the whole thing.  If we want to
+    # If -C, don't bother to copy if it wouldn't change the file.
-# ignore errors from any of these, just make sure not to ignore
+    if $copy_on_change &&
-# errors from the above "$doit $instcmd $src $dsttmp" command.
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+       eval "$initialize_posix_glob" &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+       $posix_glob set -f &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+       set X $old && old=:$2:$4:$5:$6 &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
 
-# Now rename the file to the real destination.
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
 
-	$doit $rmcmd -f $dstdir/$dstfile &&
+      # The rename failed, perhaps because mv can't rename something else
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
 
-fi &&
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
 
+    trap '' 0
+  fi
+done
 
-exit 0
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

m4/intldir.m4

@@ -0,0 +1,19 @@
+# intldir.m4 serial 1 (gettext-0.16)
+dnl Copyright (C) 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+AC_PREREQ(2.52)
+
+dnl Tells the AM_GNU_GETTEXT macro to consider an intl/ directory.
+AC_DEFUN([AM_GNU_GETTEXT_INTL_SUBDIR], [])

missing

@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2005-06-08.21
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-#   Free Software Foundation, Inc.
+# 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@ scriptversion=2005-06-08.21
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -33,6 +31,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +44,7 @@ fi
 
 msg="missing on your system"
 
-case "$1" in
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -77,6 +77,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -86,6 +87,9 @@ Supported PROGRAM values:
   tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
     ;;
@@ -103,15 +107,22 @@ Send bug reports to <bug-automake@gnu.org>."
 
 esac
 
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
-# the program).
+# the program).  This is about non-GNU programs, so use $1 not
-case "$1" in
+# $program.
-  lex|yacc)
+case $1 in
+  lex*|yacc*)
     # Not GNU programs, they don't have --version.
     ;;
 
-  tar)
+  tar*)
     if test -n "$run"; then
        echo 1>&2 "ERROR: \`tar' requires --run"
        exit 1
@@ -135,7 +146,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case "$1" in
+case $program in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -145,7 +156,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch aclocal.m4
     ;;
 
-  autoconf)
+  autoconf*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -154,7 +165,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch configure
     ;;
 
-  autoheader)
+  autoheader*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -164,7 +175,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -184,7 +195,7 @@ WARNING: \`$1' is $msg.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te)
+  autom4te*)
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -192,8 +203,8 @@ WARNING: \`$1' is needed, but is $msg.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -207,80 +218,78 @@ WARNING: \`$1' is needed, but is $msg.
     fi
     ;;
 
-  bison|yacc)
+  bison*|yacc*)
     echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
 
-  lex|flex)
+  lex*|flex*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
 
-  help2man)
+  help2man*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
-    if test -z "$file"; then
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
-    fi
-    if [ -f "$file" ]; then
 	touch $file
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit 1
+	exit $?
     fi
     ;;
 
-  makeinfo)
+  makeinfo*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -289,11 +298,17 @@ WARNING: \`$1' is $msg.  You should only need it if
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -303,7 +318,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch $file
     ;;
 
-  tar)
+  tar*)
     shift
 
     # We have already tried tar in the generic part.
@@ -317,13 +332,13 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
@@ -356,5 +371,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:

mkinstalldirs

@@ -1,21 +1,36 @@
 #! /bin/sh
 # mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
 
+scriptversion=2009-04-28.21; # UTC
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+IFS=" ""	$nl"
 errstatus=0
-dirmode=""
+dirmode=
 
 usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
 
 # process command line arguments
 while test $# -gt 0 ; do
   case $1 in
     -h | --help | --h*)         # -h for help
-      echo "$usage" 1>&2
+      echo "$usage"
-      exit 0
+      exit $?
       ;;
     -m)                         # -m PERM arg
       shift
@@ -23,6 +38,10 @@ while test $# -gt 0 ; do
       dirmode=$1
       shift
       ;;
+    --version)
+      echo "$0 $scriptversion"
+      exit $?
+      ;;
     --)                         # stop option processing
       shift
       break
@@ -50,30 +69,58 @@ case $# in
   0) exit 0 ;;
 esac
 
+# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error.  This is a problem when calling mkinstalldirs
+# from a parallel make.  We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
 case $dirmode in
   '')
-    if mkdir -p -- . 2>/dev/null; then
+    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
       echo "mkdir -p -- $*"
       exec mkdir -p -- "$@"
+    else
+      # On NextStep and OpenStep, the `mkdir' command does not
+      # recognize any option.  It will interpret all options as
+      # directories to create, and then abort because `.' already
+      # exists.
+      test -d ./-p && rmdir ./-p
+      test -d ./--version && rmdir ./--version
     fi
     ;;
   *)
-    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+       test ! -d ./--version; then
       echo "mkdir -m $dirmode -p -- $*"
       exec mkdir -m "$dirmode" -p -- "$@"
+    else
+      # Clean up after NextStep and OpenStep mkdir.
+      for d in ./-m ./-p ./--version "./$dirmode";
+      do
+        test -d $d && rmdir $d
+      done
     fi
     ;;
 esac
 
 for file
 do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  case $file in
+    /*) pathcomp=/ ;;
+    *)  pathcomp= ;;
+  esac
+  oIFS=$IFS
+  IFS=/
+  set fnord $file
   shift
+  IFS=$oIFS
 
-  pathcomp=
   for d
   do
-    pathcomp="$pathcomp$d"
+    test "x$d" = x && continue
+
+    pathcomp=$pathcomp$d
     case $pathcomp in
       -*) pathcomp=./$pathcomp ;;
     esac
@@ -84,21 +131,21 @@ do
       mkdir "$pathcomp" || lasterr=$?
 
       if test ! -d "$pathcomp"; then
-  	errstatus=$lasterr
+	errstatus=$lasterr
       else
-  	if test ! -z "$dirmode"; then
+	if test ! -z "$dirmode"; then
 	  echo "chmod $dirmode $pathcomp"
-    	  lasterr=""
+	  lasterr=
-  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+	  chmod "$dirmode" "$pathcomp" || lasterr=$?
 
-  	  if test ! -z "$lasterr"; then
+	  if test ! -z "$lasterr"; then
-  	    errstatus=$lasterr
+	    errstatus=$lasterr
-  	  fi
+	  fi
-  	fi
+	fi
       fi
     fi
 
-    pathcomp="$pathcomp/"
+    pathcomp=$pathcomp/
   done
 done
 
@@ -107,5 +154,9 @@ exit $errstatus
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
-# mkinstalldirs ends here