2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTPeerAnnounceEntry.h"
|
|
|
|
#include "Exception.h"
|
|
|
|
#include "Util.h"
|
|
|
|
#include "MockBtContext.h"
|
|
|
|
#include "MockPeerStorage.h"
|
|
|
|
#include "BtRegistry.h"
|
2008-02-08 15:53:45 +00:00
|
|
|
#include "FileEntry.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include <cppunit/extensions/HelperMacros.h>
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
namespace aria2 {
|
|
|
|
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
class DHTPeerAnnounceEntryTest:public CppUnit::TestFixture {
|
|
|
|
|
|
|
|
CPPUNIT_TEST_SUITE(DHTPeerAnnounceEntryTest);
|
|
|
|
CPPUNIT_TEST(testRemoveStalePeerAddrEntry);
|
|
|
|
CPPUNIT_TEST(testEmpty);
|
|
|
|
CPPUNIT_TEST(testAddPeerAddrEntry);
|
|
|
|
CPPUNIT_TEST(testGetPeers);
|
|
|
|
CPPUNIT_TEST_SUITE_END();
|
|
|
|
public:
|
|
|
|
void setUp()
|
|
|
|
{
|
|
|
|
BtRegistry::unregisterAll();
|
|
|
|
}
|
|
|
|
|
|
|
|
void tearDown()
|
|
|
|
{
|
|
|
|
BtRegistry::unregisterAll();
|
|
|
|
}
|
|
|
|
|
|
|
|
void testRemoveStalePeerAddrEntry();
|
|
|
|
void testEmpty();
|
|
|
|
void testAddPeerAddrEntry();
|
|
|
|
void testGetPeers();
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
CPPUNIT_TEST_SUITE_REGISTRATION(DHTPeerAnnounceEntryTest);
|
|
|
|
|
|
|
|
void DHTPeerAnnounceEntryTest::testRemoveStalePeerAddrEntry()
|
|
|
|
{
|
|
|
|
unsigned char infohash[DHT_ID_LENGTH];
|
|
|
|
memset(infohash, 0xff, DHT_ID_LENGTH);
|
|
|
|
DHTPeerAnnounceEntry entry(infohash);
|
|
|
|
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.1", 6881));
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.2", 6882, Time(0)));
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.3", 6883));
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.4", 6884, Time(0)));
|
|
|
|
|
|
|
|
entry.removeStalePeerAddrEntry(10);
|
|
|
|
|
|
|
|
CPPUNIT_ASSERT_EQUAL((size_t)2, entry.countPeerAddrEntry());
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
const std::deque<PeerAddrEntry>& peerAddrEntries = entry.getPeerAddrEntries();
|
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.1"), peerAddrEntries[0].getIPAddress());
|
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.3"), peerAddrEntries[1].getIPAddress());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void DHTPeerAnnounceEntryTest::testEmpty()
|
|
|
|
{
|
|
|
|
unsigned char infohash[DHT_ID_LENGTH];
|
|
|
|
memset(infohash, 0xff, DHT_ID_LENGTH);
|
|
|
|
{
|
|
|
|
DHTPeerAnnounceEntry entry(infohash);
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.1", 6881));
|
|
|
|
CPPUNIT_ASSERT(!entry.empty());
|
|
|
|
}
|
|
|
|
{
|
|
|
|
DHTPeerAnnounceEntry entry(infohash);
|
|
|
|
entry.setBtContext(new MockBtContext());
|
|
|
|
CPPUNIT_ASSERT(!entry.empty());
|
|
|
|
}
|
|
|
|
{
|
|
|
|
DHTPeerAnnounceEntry entry(infohash);
|
|
|
|
CPPUNIT_ASSERT(entry.empty());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void DHTPeerAnnounceEntryTest::testAddPeerAddrEntry()
|
|
|
|
{
|
|
|
|
unsigned char infohash[DHT_ID_LENGTH];
|
|
|
|
memset(infohash, 0xff, DHT_ID_LENGTH);
|
|
|
|
|
|
|
|
DHTPeerAnnounceEntry entry(infohash);
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.1", 6881, Time(0)));
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.1", 6882));
|
|
|
|
|
|
|
|
CPPUNIT_ASSERT_EQUAL((size_t)2, entry.countPeerAddrEntry());
|
|
|
|
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.1", 6881));
|
|
|
|
|
|
|
|
CPPUNIT_ASSERT_EQUAL((size_t)2, entry.countPeerAddrEntry());
|
|
|
|
CPPUNIT_ASSERT(0 != entry.getPeerAddrEntries()[0].getLastUpdated().getTime());
|
|
|
|
}
|
|
|
|
|
|
|
|
void DHTPeerAnnounceEntryTest::testGetPeers()
|
|
|
|
{
|
|
|
|
unsigned char infohash[DHT_ID_LENGTH];
|
|
|
|
memset(infohash, 0xff, DHT_ID_LENGTH);
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
SharedHandle<MockBtContext> ctx = new MockBtContext();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
ctx->setInfoHash(infohash);
|
2008-02-08 15:53:45 +00:00
|
|
|
SharedHandle<MockPeerStorage> peerStorage = new MockPeerStorage();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
SharedHandle<Peer> activePeers[] = { new Peer("192.168.0.3", 6883),
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
new Peer("192.168.0.4", 6884) };
|
2008-02-08 15:53:45 +00:00
|
|
|
peerStorage->setActivePeers(std::deque<SharedHandle<Peer> >(&activePeers[0],
|
|
|
|
&activePeers[2]));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
BtRegistry::registerPeerStorage(ctx->getInfoHashAsString(), peerStorage);
|
|
|
|
|
|
|
|
DHTPeerAnnounceEntry entry(infohash);
|
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
std::deque<SharedHandle<Peer> > peers = entry.getPeers();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((size_t)0, peers.size());
|
|
|
|
}
|
|
|
|
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.1", 6881, Time(0)));
|
|
|
|
entry.addPeerAddrEntry(PeerAddrEntry("192.168.0.2", 6882));
|
|
|
|
|
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
std::deque<SharedHandle<Peer> > peers = entry.getPeers();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((size_t)2, peers.size());
|
2008-02-08 15:53:45 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.1"), peers[0]->ipaddr);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((uint16_t)6881, peers[0]->port);
|
2008-02-08 15:53:45 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.2"), peers[1]->ipaddr);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((uint16_t)6882, peers[1]->port);
|
|
|
|
}
|
|
|
|
entry.setBtContext(ctx);
|
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
std::deque<SharedHandle<Peer> > peers = entry.getPeers();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((size_t)4, peers.size());
|
2008-02-08 15:53:45 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.1"), peers[0]->ipaddr);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((uint16_t)6881, peers[0]->port);
|
2008-02-08 15:53:45 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.2"), peers[1]->ipaddr);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((uint16_t)6882, peers[1]->port);
|
2008-02-08 15:53:45 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.3"), peers[2]->ipaddr);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((uint16_t)6883, peers[2]->port);
|
2008-02-08 15:53:45 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(std::string("192.168.0.4"), peers[3]->ipaddr);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL((uint16_t)6884, peers[3]->port);
|
|
|
|
}
|
|
|
|
}
|
2008-02-08 15:53:45 +00:00
|
|
|
|
|
|
|
} // namespace aria2
|