2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTGetPeersReplyMessage.h"
|
2008-12-14 05:46:45 +00:00
|
|
|
|
|
|
|
#include <cppunit/extensions/HelperMacros.h>
|
|
|
|
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTNode.h"
|
|
|
|
#include "Exception.h"
|
2009-10-22 15:35:33 +00:00
|
|
|
#include "util.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTBucket.h"
|
2009-09-29 14:52:42 +00:00
|
|
|
#include "bittorrent_helper.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "Peer.h"
|
2008-12-14 05:46:45 +00:00
|
|
|
#include "bencode.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
namespace aria2 {
|
|
|
|
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
class DHTGetPeersReplyMessageTest:public CppUnit::TestFixture {
|
|
|
|
|
|
|
|
CPPUNIT_TEST_SUITE(DHTGetPeersReplyMessageTest);
|
|
|
|
CPPUNIT_TEST(testGetBencodedMessage);
|
|
|
|
CPPUNIT_TEST_SUITE_END();
|
|
|
|
public:
|
|
|
|
void setUp() {}
|
|
|
|
|
|
|
|
void tearDown() {}
|
|
|
|
|
|
|
|
void testGetBencodedMessage();
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
CPPUNIT_TEST_SUITE_REGISTRATION(DHTGetPeersReplyMessageTest);
|
|
|
|
|
|
|
|
void DHTGetPeersReplyMessageTest::testGetBencodedMessage()
|
|
|
|
{
|
2008-04-20 00:50:22 +00:00
|
|
|
SharedHandle<DHTNode> localNode(new DHTNode());
|
|
|
|
SharedHandle<DHTNode> remoteNode(new DHTNode());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2008-03-07 12:05:50 +00:00
|
|
|
unsigned char tid[DHT_TRANSACTION_ID_LENGTH];
|
2009-10-22 14:43:42 +00:00
|
|
|
util::generateRandomData(tid, DHT_TRANSACTION_ID_LENGTH);
|
2008-02-08 15:53:45 +00:00
|
|
|
std::string transactionID(&tid[0], &tid[DHT_TRANSACTION_ID_LENGTH]);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
std::string token = "token";
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
|
|
|
DHTGetPeersReplyMessage msg(localNode, remoteNode, token, transactionID);
|
2010-03-20 09:10:23 +00:00
|
|
|
msg.setVersion("A200");
|
2009-04-27 11:45:22 +00:00
|
|
|
BDE dict = BDE::dict();
|
2008-12-14 05:46:45 +00:00
|
|
|
dict["t"] = transactionID;
|
2010-03-20 09:10:23 +00:00
|
|
|
dict["v"] = BDE("A200");
|
2009-04-27 11:45:22 +00:00
|
|
|
dict["y"] = BDE("r");
|
|
|
|
BDE rDict = BDE::dict();
|
|
|
|
rDict["id"] = BDE(localNode->getID(), DHT_ID_LENGTH);
|
2008-12-14 05:46:45 +00:00
|
|
|
rDict["token"] = token;
|
|
|
|
dict["r"] = rDict;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
std::string compactNodeInfo;
|
2008-04-20 00:50:22 +00:00
|
|
|
SharedHandle<DHTNode> nodes[8];
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
for(size_t i = 0; i < DHTBucket::K; ++i) {
|
2008-04-20 00:50:22 +00:00
|
|
|
nodes[i].reset(new DHTNode());
|
2009-10-22 15:09:00 +00:00
|
|
|
nodes[i]->setIPAddress("192.168.0."+util::uitos(i+1));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
nodes[i]->setPort(6881+i);
|
|
|
|
|
2008-03-07 12:05:50 +00:00
|
|
|
unsigned char buf[6];
|
2009-09-29 14:52:42 +00:00
|
|
|
CPPUNIT_ASSERT(bittorrent::createcompact
|
2010-01-05 16:01:46 +00:00
|
|
|
(buf, nodes[i]->getIPAddress(), nodes[i]->getPort()));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
compactNodeInfo +=
|
2010-01-05 16:01:46 +00:00
|
|
|
std::string(&nodes[i]->getID()[0], &nodes[i]->getID()[DHT_ID_LENGTH])+
|
|
|
|
std::string(&buf[0], &buf[sizeof(buf)]);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
2008-12-14 05:46:45 +00:00
|
|
|
msg.setClosestKNodes
|
2010-02-28 12:30:11 +00:00
|
|
|
(std::vector<SharedHandle<DHTNode> >(&nodes[0], &nodes[DHTBucket::K]));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
std::string msgbody = msg.getBencodedMessage();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2008-12-14 05:46:45 +00:00
|
|
|
rDict["nodes"] = compactNodeInfo;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2010-03-07 14:24:21 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(util::percentEncode(bencode::encode(dict)),
|
|
|
|
util::percentEncode(msgbody));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
2008-12-14 05:46:45 +00:00
|
|
|
rDict.removeKey("nodes");
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2010-02-28 12:30:11 +00:00
|
|
|
std::vector<SharedHandle<Peer> > peers;
|
2009-04-27 11:45:22 +00:00
|
|
|
BDE valuesList = BDE::list();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
for(size_t i = 0; i < 4; ++i) {
|
2009-10-22 15:09:00 +00:00
|
|
|
SharedHandle<Peer> peer(new Peer("192.168.0."+util::uitos(i+1), 6881+i));
|
2008-03-07 12:05:50 +00:00
|
|
|
unsigned char buffer[6];
|
2009-09-29 14:52:42 +00:00
|
|
|
CPPUNIT_ASSERT(bittorrent::createcompact
|
2010-01-05 16:01:46 +00:00
|
|
|
(buffer, peer->ipaddr, peer->port));
|
2009-04-27 11:45:22 +00:00
|
|
|
valuesList << BDE(buffer, sizeof(buffer));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
peers.push_back(peer);
|
|
|
|
}
|
2008-12-14 05:46:45 +00:00
|
|
|
rDict["values"] = valuesList;
|
|
|
|
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
msg.setValues(peers);
|
2008-02-08 15:53:45 +00:00
|
|
|
std::string msgbody = msg.getBencodedMessage();
|
2008-12-14 05:46:45 +00:00
|
|
|
|
2010-03-07 14:24:21 +00:00
|
|
|
CPPUNIT_ASSERT_EQUAL(util::percentEncode(bencode::encode(dict)),
|
|
|
|
util::percentEncode(msgbody));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
}
|
2008-02-08 15:53:45 +00:00
|
|
|
|
|
|
|
} // namespace aria2
|