2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
/* <!-- copyright */
|
|
|
|
/*
|
|
|
|
* aria2 - The high speed download utility
|
|
|
|
*
|
|
|
|
* Copyright (C) 2006 Tatsuhiro Tsujikawa
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
2010-01-05 16:01:46 +00:00
|
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
*
|
|
|
|
* In addition, as a special exception, the copyright holders give
|
|
|
|
* permission to link the code of portions of this program with the
|
|
|
|
* OpenSSL library under certain conditions as described in each
|
|
|
|
* individual source file, and distribute linked combinations
|
|
|
|
* including the two.
|
|
|
|
* You must obey the GNU General Public License in all respects
|
|
|
|
* for all of the code used other than OpenSSL. If you modify
|
|
|
|
* file(s) with this exception, you may extend this exception to your
|
|
|
|
* version of the file(s), but you are not obligated to do so. If you
|
|
|
|
* do not wish to do so, delete this exception statement from your
|
|
|
|
* version. If you delete this exception statement from all source
|
|
|
|
* files in the program, then also delete it here.
|
|
|
|
*/
|
|
|
|
/* copyright --> */
|
|
|
|
#include "DHTBucket.h"
|
2009-04-01 12:28:39 +00:00
|
|
|
|
|
|
|
#include <cstring>
|
|
|
|
#include <cassert>
|
|
|
|
#include <algorithm>
|
|
|
|
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTNode.h"
|
|
|
|
#include "LogFactory.h"
|
2008-02-08 15:53:45 +00:00
|
|
|
#include "Logger.h"
|
2009-10-22 15:35:33 +00:00
|
|
|
#include "util.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTConstants.h"
|
|
|
|
#include "a2functional.h"
|
2009-10-22 14:43:42 +00:00
|
|
|
#include "bittorrent_helper.h"
|
|
|
|
#include "bitfield.h"
|
2008-02-08 15:53:45 +00:00
|
|
|
|
|
|
|
namespace aria2 {
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2008-02-27 13:16:04 +00:00
|
|
|
DHTBucket::DHTBucket(size_t prefixLength,
|
2010-01-05 16:01:46 +00:00
|
|
|
const unsigned char* max, const unsigned char* min,
|
|
|
|
const SharedHandle<DHTNode>& localNode):
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
_prefixLength(prefixLength),
|
|
|
|
_localNode(localNode),
|
|
|
|
_logger(LogFactory::getInstance())
|
|
|
|
{
|
|
|
|
memcpy(_max, max, DHT_ID_LENGTH);
|
|
|
|
memcpy(_min, min, DHT_ID_LENGTH);
|
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
DHTBucket::DHTBucket(const SharedHandle<DHTNode>& localNode):
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
_prefixLength(0),
|
|
|
|
_localNode(localNode),
|
|
|
|
_logger(LogFactory::getInstance())
|
|
|
|
{
|
|
|
|
memset(_max, 0xff, DHT_ID_LENGTH);
|
|
|
|
memset(_min, 0, DHT_ID_LENGTH);
|
|
|
|
}
|
|
|
|
|
|
|
|
DHTBucket::~DHTBucket() {}
|
|
|
|
|
|
|
|
void DHTBucket::getRandomNodeID(unsigned char* nodeID) const
|
|
|
|
{
|
|
|
|
if(_prefixLength == 0) {
|
2010-01-17 10:05:53 +00:00
|
|
|
util::generateRandomKey(nodeID);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
} else {
|
|
|
|
size_t lastByteIndex = (_prefixLength-1)/8;
|
2010-01-17 10:05:53 +00:00
|
|
|
util::generateRandomKey(nodeID);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
memcpy(nodeID, _min, lastByteIndex+1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
bool DHTBucket::isInRange(const SharedHandle<DHTNode>& node) const
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-09-18 13:21:33 +00:00
|
|
|
return isInRange(node->getID(), _max, _min);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
bool DHTBucket::isInRange(const unsigned char* nodeID) const
|
2008-09-18 13:21:33 +00:00
|
|
|
{
|
|
|
|
return isInRange(nodeID, _max, _min);
|
|
|
|
}
|
|
|
|
|
2009-04-01 12:28:39 +00:00
|
|
|
// Returns true if nodeID is in [min, max] (inclusive).
|
2008-09-18 13:21:33 +00:00
|
|
|
bool DHTBucket::isInRange(const unsigned char* nodeID,
|
2010-01-05 16:01:46 +00:00
|
|
|
const unsigned char* max,
|
|
|
|
const unsigned char* min) const
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2009-04-01 12:28:39 +00:00
|
|
|
return
|
|
|
|
!std::lexicographical_compare(&nodeID[0], &nodeID[DHT_ID_LENGTH],
|
2010-01-05 16:01:46 +00:00
|
|
|
&min[0], &min[DHT_ID_LENGTH]) &&
|
2009-04-01 12:28:39 +00:00
|
|
|
!std::lexicographical_compare(&max[0], &max[DHT_ID_LENGTH],
|
2010-01-05 16:01:46 +00:00
|
|
|
&nodeID[0], &nodeID[DHT_ID_LENGTH]);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
bool DHTBucket::addNode(const SharedHandle<DHTNode>& node)
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
|
|
|
notifyUpdate();
|
2010-02-28 16:04:52 +00:00
|
|
|
std::deque<SharedHandle<DHTNode> >::iterator itr =
|
|
|
|
std::find(_nodes.begin(), _nodes.end(), node);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
if(itr == _nodes.end()) {
|
|
|
|
if(_nodes.size() < K) {
|
|
|
|
_nodes.push_back(node);
|
|
|
|
return true;
|
|
|
|
} else {
|
|
|
|
if(_nodes.front()->isBad()) {
|
2010-01-05 16:01:46 +00:00
|
|
|
_nodes.erase(_nodes.begin());
|
|
|
|
_nodes.push_back(node);
|
|
|
|
return true;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
} else {
|
2010-01-05 16:01:46 +00:00
|
|
|
return false;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
_nodes.erase(itr);
|
|
|
|
_nodes.push_back(node);
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-03-11 14:19:10 +00:00
|
|
|
void DHTBucket::cacheNode(const SharedHandle<DHTNode>& node)
|
|
|
|
{
|
|
|
|
// _cachedNodes are sorted by last time seen
|
|
|
|
_cachedNodes.push_front(node);
|
|
|
|
if(_cachedNodes.size() > CACHE_SIZE) {
|
2008-04-20 00:50:22 +00:00
|
|
|
_cachedNodes.resize(CACHE_SIZE, SharedHandle<DHTNode>());
|
2008-03-11 14:19:10 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
void DHTBucket::dropNode(const SharedHandle<DHTNode>& node)
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-03-11 14:19:10 +00:00
|
|
|
if(_cachedNodes.size()) {
|
2010-02-28 16:04:52 +00:00
|
|
|
std::deque<SharedHandle<DHTNode> >::iterator itr =
|
|
|
|
find(_nodes.begin(), _nodes.end(), node);
|
2008-03-11 14:19:10 +00:00
|
|
|
if(itr != _nodes.end()) {
|
|
|
|
_nodes.erase(itr);
|
|
|
|
_nodes.push_back(_cachedNodes.front());
|
|
|
|
_cachedNodes.erase(_cachedNodes.begin());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
void DHTBucket::moveToHead(const SharedHandle<DHTNode>& node)
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
std::deque<SharedHandle<DHTNode> >::iterator itr =
|
|
|
|
std::find(_nodes.begin(), _nodes.end(), node);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
if(itr != _nodes.end()) {
|
|
|
|
_nodes.erase(itr);
|
|
|
|
_nodes.push_front(node);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
void DHTBucket::moveToTail(const SharedHandle<DHTNode>& node)
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
std::deque<SharedHandle<DHTNode> >::iterator itr =
|
|
|
|
std::find(_nodes.begin(), _nodes.end(), node);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
if(itr != _nodes.end()) {
|
|
|
|
_nodes.erase(itr);
|
|
|
|
_nodes.push_back(node);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
bool DHTBucket::splitAllowed() const
|
|
|
|
{
|
|
|
|
return _prefixLength < DHT_ID_LENGTH*8-1 && isInRange(_localNode);
|
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
SharedHandle<DHTBucket> DHTBucket::split()
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
|
|
|
assert(splitAllowed());
|
|
|
|
|
|
|
|
unsigned char rMax[DHT_ID_LENGTH];
|
|
|
|
memcpy(rMax, _max, DHT_ID_LENGTH);
|
2009-10-22 14:43:42 +00:00
|
|
|
bitfield::flipBit(rMax, DHT_ID_LENGTH, _prefixLength);
|
2008-09-18 13:21:33 +00:00
|
|
|
unsigned char rMin[DHT_ID_LENGTH];
|
|
|
|
memcpy(rMin, _min, DHT_ID_LENGTH);
|
|
|
|
|
2009-10-22 14:43:42 +00:00
|
|
|
bitfield::flipBit(_min, DHT_ID_LENGTH, _prefixLength);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2009-04-13 12:47:50 +00:00
|
|
|
++_prefixLength;
|
|
|
|
SharedHandle<DHTBucket> rBucket(new DHTBucket(_prefixLength,
|
2010-01-05 16:01:46 +00:00
|
|
|
rMax, rMin, _localNode));
|
2009-04-13 12:47:50 +00:00
|
|
|
|
|
|
|
std::deque<SharedHandle<DHTNode> > lNodes;
|
2010-02-28 16:04:52 +00:00
|
|
|
for(std::deque<SharedHandle<DHTNode> >::iterator i = _nodes.begin(),
|
|
|
|
eoi = _nodes.end(); i != eoi; ++i) {
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
if(rBucket->isInRange(*i)) {
|
|
|
|
assert(rBucket->addNode(*i));
|
|
|
|
} else {
|
2009-04-13 12:47:50 +00:00
|
|
|
lNodes.push_back(*i);
|
|
|
|
}
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
2009-04-13 12:47:50 +00:00
|
|
|
_nodes = lNodes;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
// TODO create toString() and use it.
|
2010-02-09 12:20:20 +00:00
|
|
|
if(_logger->debug()) {
|
|
|
|
_logger->debug("New bucket. prefixLength=%u, Range:%s-%s",
|
|
|
|
static_cast<unsigned int>(rBucket->getPrefixLength()),
|
|
|
|
util::toHex(rBucket->getMinID(), DHT_ID_LENGTH).c_str(),
|
|
|
|
util::toHex(rBucket->getMaxID(), DHT_ID_LENGTH).c_str());
|
|
|
|
_logger->debug("Existing bucket. prefixLength=%u, Range:%s-%s",
|
|
|
|
static_cast<unsigned int>(_prefixLength),
|
|
|
|
util::toHex(getMinID(), DHT_ID_LENGTH).c_str(),
|
|
|
|
util::toHex(getMaxID(), DHT_ID_LENGTH).c_str());
|
|
|
|
}
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
return rBucket;
|
|
|
|
}
|
|
|
|
|
2010-02-28 12:30:11 +00:00
|
|
|
void DHTBucket::getGoodNodes
|
|
|
|
(std::vector<SharedHandle<DHTNode> >& goodNodes) const
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2010-02-28 12:30:11 +00:00
|
|
|
goodNodes.insert(goodNodes.end(), _nodes.begin(), _nodes.end());
|
2008-02-08 15:53:45 +00:00
|
|
|
goodNodes.erase(std::remove_if(goodNodes.begin(), goodNodes.end(),
|
2010-01-05 16:01:46 +00:00
|
|
|
mem_fun_sh(&DHTNode::isBad)), goodNodes.end());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
SharedHandle<DHTNode> DHTBucket::getNode(const unsigned char* nodeID, const std::string& ipaddr, uint16_t port) const
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-04-20 00:50:22 +00:00
|
|
|
SharedHandle<DHTNode> node(new DHTNode(nodeID));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
node->setIPAddress(ipaddr);
|
|
|
|
node->setPort(port);
|
2008-02-08 15:53:45 +00:00
|
|
|
std::deque<SharedHandle<DHTNode> >::const_iterator itr =
|
|
|
|
std::find(_nodes.begin(), _nodes.end(), node);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
if(itr == _nodes.end()) {
|
2008-04-20 00:50:22 +00:00
|
|
|
return SharedHandle<DHTNode>();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
} else {
|
|
|
|
return *itr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
bool DHTBucket::operator==(const DHTBucket& bucket) const
|
|
|
|
{
|
|
|
|
return memcmp(_max, bucket._max, DHT_ID_LENGTH) == 0 &&
|
|
|
|
memcmp(_min, bucket._min, DHT_ID_LENGTH) == 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool DHTBucket::needsRefresh() const
|
|
|
|
{
|
|
|
|
return _nodes.size() < K || _lastUpdated.elapsed(DHT_BUCKET_REFRESH_INTERVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
void DHTBucket::notifyUpdate()
|
|
|
|
{
|
|
|
|
_lastUpdated.reset();
|
|
|
|
}
|
|
|
|
|
|
|
|
class FindQuestionableNode {
|
|
|
|
public:
|
2008-02-08 15:53:45 +00:00
|
|
|
bool operator()(const SharedHandle<DHTNode>& node) const
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
|
|
|
return node->isQuestionable();
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
bool DHTBucket::containsQuestionableNode() const
|
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
return std::find_if(_nodes.begin(), _nodes.end(), FindQuestionableNode()) != _nodes.end();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
SharedHandle<DHTNode> DHTBucket::getLRUQuestionableNode() const
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2008-02-08 15:53:45 +00:00
|
|
|
std::deque<SharedHandle<DHTNode> >::const_iterator i =
|
|
|
|
std::find_if(_nodes.begin(), _nodes.end(), FindQuestionableNode());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
if(i == _nodes.end()) {
|
2008-04-20 00:50:22 +00:00
|
|
|
return SharedHandle<DHTNode>();
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
} else {
|
|
|
|
return *i;
|
|
|
|
}
|
|
|
|
}
|
2008-02-08 15:53:45 +00:00
|
|
|
|
|
|
|
} // namespace aria2
|