2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
/* <!-- copyright */
|
|
|
|
/*
|
|
|
|
* aria2 - The high speed download utility
|
|
|
|
*
|
|
|
|
* Copyright (C) 2006 Tatsuhiro Tsujikawa
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
2010-01-05 16:01:46 +00:00
|
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
*
|
|
|
|
* In addition, as a special exception, the copyright holders give
|
|
|
|
* permission to link the code of portions of this program with the
|
|
|
|
* OpenSSL library under certain conditions as described in each
|
|
|
|
* individual source file, and distribute linked combinations
|
|
|
|
* including the two.
|
|
|
|
* You must obey the GNU General Public License in all respects
|
|
|
|
* for all of the code used other than OpenSSL. If you modify
|
|
|
|
* file(s) with this exception, you may extend this exception to your
|
|
|
|
* version of the file(s), but you are not obligated to do so. If you
|
|
|
|
* do not wish to do so, delete this exception statement from your
|
|
|
|
* version. If you delete this exception statement from all source
|
|
|
|
* files in the program, then also delete it here.
|
|
|
|
*/
|
|
|
|
/* copyright --> */
|
|
|
|
#include "DHTSetup.h"
|
2008-11-03 06:49:02 +00:00
|
|
|
|
|
|
|
#include <algorithm>
|
|
|
|
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "LogFactory.h"
|
2008-02-08 15:53:45 +00:00
|
|
|
#include "Logger.h"
|
2009-10-22 15:35:33 +00:00
|
|
|
#include "util.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTNode.h"
|
|
|
|
#include "DHTConnectionImpl.h"
|
|
|
|
#include "DHTRoutingTable.h"
|
|
|
|
#include "DHTMessageFactoryImpl.h"
|
|
|
|
#include "DHTMessageTracker.h"
|
2008-02-11 07:50:35 +00:00
|
|
|
#include "DHTMessageDispatcherImpl.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DHTMessageReceiver.h"
|
|
|
|
#include "DHTTaskQueueImpl.h"
|
|
|
|
#include "DHTTaskFactoryImpl.h"
|
|
|
|
#include "DHTPeerAnnounceStorage.h"
|
|
|
|
#include "DHTTokenTracker.h"
|
|
|
|
#include "DHTInteractionCommand.h"
|
|
|
|
#include "DHTTokenUpdateCommand.h"
|
|
|
|
#include "DHTBucketRefreshCommand.h"
|
|
|
|
#include "DHTPeerAnnounceCommand.h"
|
|
|
|
#include "DHTEntryPointNameResolveCommand.h"
|
|
|
|
#include "DHTAutoSaveCommand.h"
|
|
|
|
#include "DHTTask.h"
|
|
|
|
#include "DHTRoutingTableDeserializer.h"
|
|
|
|
#include "DHTRegistry.h"
|
2008-02-08 16:11:21 +00:00
|
|
|
#include "DHTBucketRefreshTask.h"
|
2008-04-20 00:50:22 +00:00
|
|
|
#include "DHTMessageCallback.h"
|
2013-07-02 13:58:20 +00:00
|
|
|
#include "DHTMessageTrackerEntry.h"
|
|
|
|
#include "DHTMessageEntry.h"
|
2013-02-24 15:56:49 +00:00
|
|
|
#include "UDPTrackerClient.h"
|
|
|
|
#include "BtRegistry.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "prefs.h"
|
|
|
|
#include "Option.h"
|
2008-02-08 15:53:45 +00:00
|
|
|
#include "SocketCore.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
#include "DlAbortEx.h"
|
|
|
|
#include "RecoverableException.h"
|
2008-05-11 09:36:39 +00:00
|
|
|
#include "a2functional.h"
|
2008-11-03 07:49:13 +00:00
|
|
|
#include "DownloadEngine.h"
|
2010-11-20 08:21:36 +00:00
|
|
|
#include "fmt.h"
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
namespace aria2 {
|
|
|
|
|
2010-11-20 08:21:36 +00:00
|
|
|
DHTSetup::DHTSetup() {}
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
|
|
|
DHTSetup::~DHTSetup() {}
|
|
|
|
|
2013-06-23 12:55:52 +00:00
|
|
|
std::vector<std::unique_ptr<Command>> DHTSetup::setup
|
|
|
|
(DownloadEngine* e, int family)
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2013-06-23 12:55:52 +00:00
|
|
|
std::vector<std::unique_ptr<Command> > tempCommands;
|
|
|
|
if((family != AF_INET && family != AF_INET6) ||
|
|
|
|
(family == AF_INET && DHTRegistry::isInitialized()) ||
|
2010-08-07 14:15:21 +00:00
|
|
|
(family == AF_INET6 && DHTRegistry::isInitialized6())) {
|
2013-06-23 12:55:52 +00:00
|
|
|
return tempCommands;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
try {
|
|
|
|
// load routing table and localnode id here
|
2013-06-21 16:10:38 +00:00
|
|
|
std::shared_ptr<DHTNode> localNode;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2010-08-07 14:15:21 +00:00
|
|
|
DHTRoutingTableDeserializer deserializer(family);
|
|
|
|
const std::string& dhtFile =
|
|
|
|
e->getOption()->get(family == AF_INET?PREF_DHT_FILE_PATH:
|
|
|
|
PREF_DHT_FILE_PATH6);
|
2009-07-22 12:54:35 +00:00
|
|
|
try {
|
2011-08-05 11:17:19 +00:00
|
|
|
deserializer.deserialize(dhtFile);
|
2009-07-22 12:54:35 +00:00
|
|
|
localNode = deserializer.getLocalNode();
|
|
|
|
} catch(RecoverableException& e) {
|
2010-11-20 08:21:36 +00:00
|
|
|
A2_LOG_ERROR_EX
|
|
|
|
(fmt("Exception caught while loading DHT routing table from %s",
|
|
|
|
dhtFile.c_str()),
|
|
|
|
e);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
2010-11-12 12:48:48 +00:00
|
|
|
if(!localNode) {
|
2008-04-20 00:50:22 +00:00
|
|
|
localNode.reset(new DHTNode());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
|
2013-02-25 14:04:12 +00:00
|
|
|
uint16_t port;
|
2013-07-06 13:55:00 +00:00
|
|
|
auto connection = make_unique<DHTConnectionImpl>(family);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2013-02-25 14:04:12 +00:00
|
|
|
port = e->getBtRegistry()->getUdpPort();
|
2010-08-07 14:15:21 +00:00
|
|
|
const std::string& addr =
|
2013-02-25 14:04:12 +00:00
|
|
|
e->getOption()->get(family == AF_INET ? PREF_DHT_LISTEN_ADDR:
|
2010-08-07 14:15:21 +00:00
|
|
|
PREF_DHT_LISTEN_ADDR6);
|
2013-02-25 14:04:12 +00:00
|
|
|
// If UDP port is already used, use the same port
|
|
|
|
// number. Normally IPv4 port is available, then IPv6 port is
|
|
|
|
// (especially for port >= 1024). We don't loose much by doing
|
|
|
|
// this. We did the same thing in TCP socket. See BtSetup.cc.
|
|
|
|
bool rv;
|
|
|
|
if(port == 0) {
|
|
|
|
SegList<int> sgl;
|
|
|
|
util::parseIntSegments(sgl, e->getOption()->get(PREF_DHT_LISTEN_PORT));
|
|
|
|
sgl.normalize();
|
|
|
|
rv = connection->bind(port, addr, sgl);
|
|
|
|
} else {
|
|
|
|
rv = connection->bind(port, addr);
|
|
|
|
}
|
|
|
|
if(!rv) {
|
2013-02-25 13:29:46 +00:00
|
|
|
throw DL_ABORT_EX("Error occurred while binding UDP port for DHT");
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
localNode->setPort(port);
|
|
|
|
}
|
2010-11-20 08:21:36 +00:00
|
|
|
A2_LOG_DEBUG(fmt("Initialized local node ID=%s",
|
|
|
|
util::toHex(localNode->getID(), DHT_ID_LENGTH).c_str()));
|
2013-07-02 13:58:20 +00:00
|
|
|
auto tracker = std::make_shared<DHTMessageTracker>();
|
2013-07-02 14:52:40 +00:00
|
|
|
auto routingTable = make_unique<DHTRoutingTable>(localNode);
|
|
|
|
auto factory = make_unique<DHTMessageFactoryImpl>(family);
|
|
|
|
auto dispatcher = make_unique<DHTMessageDispatcherImpl>(tracker);
|
|
|
|
auto receiver = make_unique<DHTMessageReceiver>(tracker);
|
|
|
|
auto taskQueue = make_unique<DHTTaskQueueImpl>();
|
|
|
|
auto taskFactory = make_unique<DHTTaskFactoryImpl>();
|
|
|
|
auto peerAnnounceStorage = make_unique<DHTPeerAnnounceStorage>();
|
|
|
|
auto tokenTracker = make_unique<DHTTokenTracker>();
|
|
|
|
// For now, UDPTrackerClient was enabled along with DHT
|
|
|
|
auto udpTrackerClient = std::make_shared<UDPTrackerClient>();
|
2013-07-02 13:58:20 +00:00
|
|
|
const time_t messageTimeout =
|
|
|
|
e->getOption()->getAsInt(PREF_DHT_MESSAGE_TIMEOUT);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
// wiring up
|
2013-07-02 14:52:40 +00:00
|
|
|
tracker->setRoutingTable(routingTable.get());
|
2013-07-02 13:58:20 +00:00
|
|
|
tracker->setMessageFactory(factory.get());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2010-03-30 14:46:26 +00:00
|
|
|
dispatcher->setTimeout(messageTimeout);
|
|
|
|
|
2013-07-02 14:52:40 +00:00
|
|
|
receiver->setMessageFactory(factory.get());
|
|
|
|
receiver->setRoutingTable(routingTable.get());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
|
|
|
taskFactory->setLocalNode(localNode);
|
2010-11-12 12:48:48 +00:00
|
|
|
taskFactory->setRoutingTable(routingTable.get());
|
|
|
|
taskFactory->setMessageDispatcher(dispatcher.get());
|
|
|
|
taskFactory->setMessageFactory(factory.get());
|
|
|
|
taskFactory->setTaskQueue(taskQueue.get());
|
2010-03-30 14:46:26 +00:00
|
|
|
taskFactory->setTimeout(messageTimeout);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2013-07-02 14:52:40 +00:00
|
|
|
routingTable->setTaskQueue(taskQueue.get());
|
|
|
|
routingTable->setTaskFactory(taskFactory.get());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2013-07-02 14:52:40 +00:00
|
|
|
peerAnnounceStorage->setTaskQueue(taskQueue.get());
|
|
|
|
peerAnnounceStorage->setTaskFactory(taskFactory.get());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
|
2010-11-12 12:48:48 +00:00
|
|
|
factory->setRoutingTable(routingTable.get());
|
|
|
|
factory->setConnection(connection.get());
|
|
|
|
factory->setMessageDispatcher(dispatcher.get());
|
|
|
|
factory->setPeerAnnounceStorage(peerAnnounceStorage.get());
|
|
|
|
factory->setTokenTracker(tokenTracker.get());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
factory->setLocalNode(localNode);
|
|
|
|
|
2013-08-25 15:36:53 +00:00
|
|
|
PrefPtr prefEntryPointHost =
|
2010-08-07 14:15:21 +00:00
|
|
|
family == AF_INET?PREF_DHT_ENTRY_POINT_HOST:PREF_DHT_ENTRY_POINT_HOST6;
|
|
|
|
if(!e->getOption()->get(prefEntryPointHost).empty()) {
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
{
|
2013-08-25 15:36:53 +00:00
|
|
|
PrefPtr prefEntryPointPort =
|
2010-08-07 14:15:21 +00:00
|
|
|
family == AF_INET?PREF_DHT_ENTRY_POINT_PORT:
|
|
|
|
PREF_DHT_ENTRY_POINT_PORT6;
|
2010-03-11 16:04:50 +00:00
|
|
|
std::pair<std::string, uint16_t> addr
|
2010-08-07 14:15:21 +00:00
|
|
|
(e->getOption()->get(prefEntryPointHost),
|
|
|
|
e->getOption()->getAsInt(prefEntryPointPort));
|
2013-07-02 13:58:20 +00:00
|
|
|
std::vector<std::pair<std::string, uint16_t>> entryPoints;
|
2010-01-05 16:01:46 +00:00
|
|
|
entryPoints.push_back(addr);
|
2013-06-23 12:55:52 +00:00
|
|
|
auto command = make_unique<DHTEntryPointNameResolveCommand>
|
|
|
|
(e->newCUID(), e, entryPoints);
|
2010-01-05 16:01:46 +00:00
|
|
|
command->setBootstrapEnabled(true);
|
2013-07-02 14:52:40 +00:00
|
|
|
command->setTaskQueue(taskQueue.get());
|
|
|
|
command->setTaskFactory(taskFactory.get());
|
|
|
|
command->setRoutingTable(routingTable.get());
|
2010-01-05 16:01:46 +00:00
|
|
|
command->setLocalNode(localNode);
|
2013-06-23 12:55:52 +00:00
|
|
|
tempCommands.push_back(std::move(command));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
} else {
|
2010-11-20 08:21:36 +00:00
|
|
|
A2_LOG_INFO("No DHT entry point specified.");
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
{
|
2013-06-23 12:55:52 +00:00
|
|
|
auto command = make_unique<DHTInteractionCommand>(e->newCUID(), e);
|
2013-07-02 14:52:40 +00:00
|
|
|
command->setMessageDispatcher(dispatcher.get());
|
|
|
|
command->setMessageReceiver(receiver.get());
|
|
|
|
command->setTaskQueue(taskQueue.get());
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
command->setReadCheckSocket(connection->getSocket());
|
2013-07-06 13:55:00 +00:00
|
|
|
command->setConnection(std::move(connection));
|
2013-02-24 15:56:49 +00:00
|
|
|
command->setUDPTrackerClient(udpTrackerClient);
|
2013-06-23 12:55:52 +00:00
|
|
|
tempCommands.push_back(std::move(command));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
{
|
2013-06-23 12:55:52 +00:00
|
|
|
auto command = make_unique<DHTTokenUpdateCommand>
|
|
|
|
(e->newCUID(), e, DHT_TOKEN_UPDATE_INTERVAL);
|
2013-07-02 14:52:40 +00:00
|
|
|
command->setTokenTracker(tokenTracker.get());
|
2013-06-23 12:55:52 +00:00
|
|
|
tempCommands.push_back(std::move(command));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
{
|
2013-06-23 12:55:52 +00:00
|
|
|
auto command = make_unique<DHTBucketRefreshCommand>
|
|
|
|
(e->newCUID(), e, DHT_BUCKET_REFRESH_CHECK_INTERVAL);
|
2013-07-02 14:52:40 +00:00
|
|
|
command->setTaskQueue(taskQueue.get());
|
|
|
|
command->setRoutingTable(routingTable.get());
|
|
|
|
command->setTaskFactory(taskFactory.get());
|
2013-06-23 12:55:52 +00:00
|
|
|
tempCommands.push_back(std::move(command));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
{
|
2013-06-23 12:55:52 +00:00
|
|
|
auto command = make_unique<DHTPeerAnnounceCommand>
|
|
|
|
(e->newCUID(), e, DHT_PEER_ANNOUNCE_CHECK_INTERVAL);
|
2013-07-02 14:52:40 +00:00
|
|
|
command->setPeerAnnounceStorage(peerAnnounceStorage.get());
|
2013-06-23 12:55:52 +00:00
|
|
|
tempCommands.push_back(std::move(command));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
{
|
2013-06-23 12:55:52 +00:00
|
|
|
auto command = make_unique<DHTAutoSaveCommand>
|
|
|
|
(e->newCUID(), e, family, 30*60);
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
command->setLocalNode(localNode);
|
2013-07-02 14:52:40 +00:00
|
|
|
command->setRoutingTable(routingTable.get());
|
2013-06-23 12:55:52 +00:00
|
|
|
tempCommands.push_back(std::move(command));
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
2013-07-02 14:52:40 +00:00
|
|
|
// add deserialized nodes to routing table
|
|
|
|
auto& desnodes = deserializer.getNodes();
|
|
|
|
for(auto& node : desnodes) {
|
|
|
|
routingTable->addNode(node);
|
|
|
|
}
|
|
|
|
if(!desnodes.empty()) {
|
|
|
|
auto task = std::static_pointer_cast<DHTBucketRefreshTask>
|
|
|
|
(taskFactory->createBucketRefreshTask());
|
|
|
|
task->setForceRefresh(true);
|
|
|
|
taskQueue->addPeriodicTask1(task);
|
|
|
|
}
|
|
|
|
// assign them into DHTRegistry
|
2010-08-07 14:15:21 +00:00
|
|
|
if(family == AF_INET) {
|
2013-07-02 14:52:40 +00:00
|
|
|
DHTRegistry::getMutableData().localNode = localNode;
|
|
|
|
DHTRegistry::getMutableData().routingTable = std::move(routingTable);
|
|
|
|
DHTRegistry::getMutableData().taskQueue = std::move(taskQueue);
|
|
|
|
DHTRegistry::getMutableData().taskFactory = std::move(taskFactory);
|
|
|
|
DHTRegistry::getMutableData().peerAnnounceStorage =
|
|
|
|
std::move(peerAnnounceStorage);
|
|
|
|
DHTRegistry::getMutableData().tokenTracker = std::move(tokenTracker);
|
|
|
|
DHTRegistry::getMutableData().messageDispatcher = std::move(dispatcher);
|
|
|
|
DHTRegistry::getMutableData().messageReceiver = std::move(receiver);
|
|
|
|
DHTRegistry::getMutableData().messageFactory = std::move(factory);
|
|
|
|
e->getBtRegistry()->setUDPTrackerClient(udpTrackerClient);
|
2010-08-07 14:15:21 +00:00
|
|
|
DHTRegistry::setInitialized(true);
|
|
|
|
} else {
|
2013-07-02 14:52:40 +00:00
|
|
|
DHTRegistry::getMutableData6().localNode = localNode;
|
|
|
|
DHTRegistry::getMutableData6().routingTable = std::move(routingTable);
|
|
|
|
DHTRegistry::getMutableData6().taskQueue = std::move(taskQueue);
|
|
|
|
DHTRegistry::getMutableData6().taskFactory = std::move(taskFactory);
|
|
|
|
DHTRegistry::getMutableData6().peerAnnounceStorage =
|
|
|
|
std::move(peerAnnounceStorage);
|
|
|
|
DHTRegistry::getMutableData6().tokenTracker = std::move(tokenTracker);
|
|
|
|
DHTRegistry::getMutableData6().messageDispatcher = std::move(dispatcher);
|
|
|
|
DHTRegistry::getMutableData6().messageReceiver = std::move(receiver);
|
|
|
|
DHTRegistry::getMutableData6().messageFactory = std::move(factory);
|
2010-08-07 14:15:21 +00:00
|
|
|
DHTRegistry::setInitialized6(true);
|
|
|
|
}
|
2013-02-25 14:04:12 +00:00
|
|
|
if(e->getBtRegistry()->getUdpPort() == 0) {
|
|
|
|
// We assign port last so that no exception gets in the way
|
|
|
|
e->getBtRegistry()->setUdpPort(port);
|
|
|
|
}
|
2013-02-24 15:56:49 +00:00
|
|
|
} catch(RecoverableException& ex) {
|
2010-11-20 08:21:36 +00:00
|
|
|
A2_LOG_ERROR_EX(fmt("Exception caught while initializing DHT functionality."
|
|
|
|
" DHT is disabled."),
|
2013-02-24 15:56:49 +00:00
|
|
|
ex);
|
2013-06-23 12:55:52 +00:00
|
|
|
tempCommands.clear();
|
2010-08-07 14:15:21 +00:00
|
|
|
if(family == AF_INET) {
|
|
|
|
DHTRegistry::clearData();
|
2013-02-24 15:56:49 +00:00
|
|
|
e->getBtRegistry()->setUDPTrackerClient
|
2013-07-02 13:58:20 +00:00
|
|
|
(std::shared_ptr<UDPTrackerClient>{});
|
2010-08-07 14:15:21 +00:00
|
|
|
} else {
|
|
|
|
DHTRegistry::clearData6();
|
|
|
|
}
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
2013-06-23 12:55:52 +00:00
|
|
|
return tempCommands;
|
2008-02-01 Tatsuhiro Tsujikawa <tujikawa at rednoah dot com>
Added DHT functionality, compatible with mainline.
DHT is disabled by default. To enable it, give --enable-dht to
aria2c.
You may need to specify entry point to DHT network using
--dht-entry-point. DHT uses UDP port to listen incoming message.
Use --dht-listen-port to specify port number. Make sure that
your
firewall configuration can pass through UDP traffic to the port.
The routing table is saved in $HOME/.aria2/dht.dat.
* src/DHT*
* src/BNode.{h, cc}
* src/PeerInteractionCommand.cc: enable DHT functionality for a
particular torrent.
* src/Data.cc: Rewritten ctor.
* src/OptionHandlerFactory.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/DefaultBtInteractive.cc: Send port message if dht is
enabled.
* src/RequestGroup.cc: Initialize DHT functionality. When
download
ends, remove BtContext from DHTPeerAnnounceStorage.
* src/BtPortMessage.{h, cc}: Rewritten.
* src/message.h
* src/OptionHandlerImpl.cc
* src/option_processing.cc: Added --enable-dht,
--dht-listen-port,
--dht-entry-point.
* src/Dictionary.{h, cc} (remove): New function.
* src/prefs.h
* src/DefaultBtMessageFactory.h
* src/BtHandshakeMessage.cc
* src/ActivePeerConnectionCommand.cc
* src/SocketCore.{h, cc}: Added datagram socket support.
* src/DefaultBtMessageFactory.cc
* src/BtSetup.cc: Add BtContext to DHTPeerAnnounceStorage here.
Create DHT commands.
* src/BtMessageFactory.h
* src/PeerMessageUtil.{h, cc}
2008-02-01 17:36:33 +00:00
|
|
|
}
|
|
|
|
|
2008-02-08 15:53:45 +00:00
|
|
|
} // namespace aria2
|