diff --git a/docs/document/level-2/README.md b/docs/document/level-2/README.md index 8e875fd..967a3dd 100644 --- a/docs/document/level-2/README.md +++ b/docs/document/level-2/README.md @@ -24,7 +24,7 @@ [通过 Xray 将特定的流量指向特定出口，实现全局路由“分流”](./redirect.md) by a [@Zzz3m](https://github.com/Zzz3m) -将 Xray 玩出花:基于 fwmark 或 sendThrough 方式实现“分流”。 +将 Xray 玩出花:基于 fwmark 、 sendThrough 或 sockopt.interface 方式实现“分流”。 [通过 Cloudflare Warp 增强代理安全性](./warp.md) by a [@yuhan6665](https://github.com/yuhan6665) diff --git a/docs/document/level-2/redirect.md b/docs/document/level-2/redirect.md index d53f7ad..16b0d45 100644 --- a/docs/document/level-2/redirect.md +++ b/docs/document/level-2/redirect.md @@ -11,7 +11,7 @@ title: 出站流量重定向 之前在网络上看到许多代理或者 VPN 会接管全局路由，如果与 Xray 同时安装，会导致 Xray 失效。参考了网络上许多教程，及时分流，也是通过维护一张或者多张 CIDR 路由表来实现的。这种情况下并不优雅，如果我想可以任意替换，实现按需分流，那有没有更好的办法呢？有！ -通过 fwmark 或 Xray 的 sendThrough，再简单配合路由表功能即可实现： +通过 fwmark 或 Xray 的 sendThrough/sockopt.interface，再简单配合路由表功能即可实现： 1. Xray 可设置指定的 Tag、域名等走指定接口。如果您的接口是双栈的，可以指定 IPV4 或者 IPV6 2. 其余用户则走原 IPV4 或者 IPV6 @@ -26,98 +26,55 @@ title: 出站流量重定向 原始文件： - - - - ```ini [Interface] -PrivateKey = xxxxxxxxxxxxxxxxxxxx -Address = "your wg0 v4 address" -Address = "your wg0 v6 address" +PrivateKey = +Address = +Address = DNS = 8.8.8.8 MTU = 1280 [Peer] -PublicKey = xxxxxxxxxxxxxxxxxxxxx +PublicKey = AllowedIPs = ::/0 AllowedIPs = 0.0.0.0/0 -Endpoint = "ip:port" +Endpoint = : ``` 在 `[Interface]` 下添加如下命令： - ```ini -Table = off -PostUP = ip -4 rule add fwmark lookup -PostUP = ip -4 route add default dev <接口名称> table
-PostUP = ip -4 rule add table main suppress_prefixlength 0 +Table =
+### fwmark +PostUP = ip rule add fwmark lookup
+PostDown = ip rule del fwmark lookup
PostUP = ip -6 rule add fwmark lookup
-PostUP = ip -6 rule add not fwmark
table
-PostUP = ip -6 route add ::/0 dev <接口名称> table
-PostUP = ip -6 rule add table main suppress_prefixlength 0 -PostDown = ip -4 rule delete fwmark lookup
-PostDown = ip -4 rule delete table main suppress_prefixlength 0 -PostDown = ip -6 rule delete fwmark lookup
-PostDown = ip -6 rule delete not fwmark
table
-PostDown = ip -6 rule delete table main suppress_prefixlength 0 -``` - -::: tip - -- 此命令表示 IPv4 中 fwmark 为 ``，IPv6 中 fwmark 为``，::/0 全局 v6 走 WireGuard -- 可根据自己需求增删命令，mark 值要与 Xray-core 中设置为相同，table 值自定 -- 如果不支持配置文件，可以在系统中修改路由表 - ::: - - - - - -```ini -[Interface] -PrivateKey = xxxxxxxxxxxxxxxxxxxx -Address = "your wg0 v4 address" -Address = "your wg0 v6 address" -DNS = 8.8.8.8 -MTU = 1280 -[Peer] -PublicKey = xxxxxxxxxxxxxxxxxxxxx -AllowedIPs = ::/0 -AllowedIPs = 0.0.0.0/0 -Endpoint = "ip:port" -``` - -在 `[Interface]` 下添加如下命令： - -```ini -Table = off -PostUP = ip -4 rule add from "your wg0 v4 address" lookup
-PostUP = ip -4 route add default dev wg0 table
-PostUP = ip -4 rule add table main suppress_prefixlength 0 -PostUP = ip -6 rule add not fwmark
table
-PostUP = ip -6 route add ::/0 dev wg0 table
-PostUP = ip -6 rule add table main suppress_prefixlength 0 -PostDown = ip -4 rule delete from "your wg0 v4 address" lookup
-PostDown = ip -4 rule delete table main suppress_prefixlength 0 -PostDown = ip -6 rule delete not fwmark
table
-PostDown = ip -6 rule delete table main suppress_prefixlength 0 +PostDown = ip -6 rule del fwmark lookup
+## sendThrough +PreUp = ip rule add from lookup
+PostDown = ip rule del from lookup
+PreUp = ip -6 rule add from lookup
+PostDown = ip -6 rule del from lookup
+## sockopt.interface +PreUp = ip rule add oif %i lookup
+PostDown = ip rule del oif %i lookup
+PreUp = ip -6 rule add oif %i lookup
+PostDown = ip -6 rule del oif %i lookup
``` - ::: tip +- 此配置文件融合了 `fwmark` / `sendThrough` / `sockopt.interface`，表示 +- 送入此设备 `%i` 的连接 / 送入此 `` 的连接 / `fwmark` 被标记为 `` 的连接 +- 将会使用 wireguard 进行转发 +- `%i` 是 wireguard 配置文件中的占位符，表示在启动时替换为这个设备的名称 +::: -- 此命令表示 IPV4 中来自 `your wg0 v4 address` 地址的走 WireGuard，IPv6 中::/0 全局 v6 走 WireGuard） -- 可根据自己需求增删命令，实现 v6 分流，也可以与 fwmark 融合 -- 如果不支持配置文件，可以在系统中修改路由表 - ::: - - - - 保存 可顺手安装 +::: warning +如果使用了 `[Interface]` 中的 `DNS` 字段，这个程序将会是必须的 +::: + ```bash apt install openresolv ``` @@ -138,11 +95,7 @@ lsmod | grep wireguard ## 4、Xray-core 配置文件修改 - - - - -```json +```jsonc { "api": { "services": [ @@ -167,108 +120,48 @@ lsmod | grep wireguard { "protocol": "freedom", "settings": { - "domainStrategy": "UseIPv6" - //设置默认用户走指定方式”UseIPv6”或者”UseIPv4” + "domainStrategy": "UseIPv4" } + //修改此处，可v4或者v6 }, + // <--请在不同的方案中选择--> 方案1：fwmark { "protocol": "freedom", "tag": "wg0", "streamSettings": { "sockopt": { - "mark": + "mark": // } }, "settings": { "domainStrategy": "UseIPv6" } - //设置fwmark为的用户走指定方式”UseIPv6””UseIPv4” - }, - { - "protocol": "blackhole", - "settings": {}, - "tag": "blocked" - } - ], - "policy": { - "system": { - "statsInboundDownlink": true, - "statsInboundUplink": true - } - }, - "routing": { - "rules": [ - { - "inboundTag": [ - "api" - ], - "outboundTag": "api", - "type": "field" - }, - { - "type": "field", - "outboundTag": "wg0", - "inboundTag": [ - "" - //需要之前在inbound中指定好Tag，我这里是api生成的,还可以添加域名等等 - ] - }, - { - "outboundTag": "blocked", - "protocol": [ - "bittorrent" - ], - "type": "field" - } - ] - }, - "stats": {} -} -``` - - - - - -```json -{ - "api": { - "services": [ - "HandlerService", - "LoggerService", - "StatsService" - ], - "tag": "api" - }, - "inbounds": [ - { - "listen": "127.0.0.1", - "port": , - "protocol": "dokodemo-door", - "settings": { - "address": "127.0.0.1" - }, - "tag": "api" - } - ], - "outbounds": [ + } //设置fwmark为的用户走指定方式”UseIPv6””UseIPv4” + // <--请在不同的方案中选择--> 方案2：sendThrough { + "tag": "wg0", "protocol": "freedom", + "sendThrough": "your wg0 v4 address", + //修改此处，可v4或者v6 "settings": { "domainStrategy": "UseIPv4" } //修改此处，可v4或者v6 }, + // <--请在不同的方案中选择--> 方案3：sockopt.interface { "tag": "wg0", "protocol": "freedom", - "sendThrough": "your wg0 v4 address", - //修改此处，可v4或者v6 "settings": { "domainStrategy": "UseIPv4" + }, + "streamSettings": { + "sockopt": { + "interface": "wg0" + } } - //修改此处，可v4或者v6 }, + // <--请在不同的方案中选择--> 结束 { "protocol": "blackhole", "settings": {}, @@ -295,7 +188,7 @@ lsmod | grep wireguard "outboundTag": "wg0", "inboundTag": [ "" - //需要之前在 inbound 中指定好 Tag，我这里是 api 生成的,还可以添加域名等等 + //需要之前在 inbound 中指定好 Tag，这里是 api 生成的,还可以添加域名等等 ] }, { @@ -311,10 +204,6 @@ lsmod | grep wireguard } ``` - - - - ::: tip 可以通过修改 "domainStrategy": "UseIPv6"来控制对应用户的访问方式 实测优先级要高于系统本身的 gai.config ::: @@ -323,6 +212,8 @@ lsmod | grep wireguard ::: tip 需要打开系统的 ip_forward +`sysctl -w net.ipv4.ip_forward=1` +`sysctl -w net.ipv6.conf.all.forwarding=1` ::: ## 6、完成 WireGuard 相关设置 @@ -342,7 +233,7 @@ systemctl start wg-quick@wg0 验证 IPv4/IPv6 -> 自行验证 Google 搜索 myip +> 在代理上 运行 `curl ip-api.com -4/-6` / 浏览器访问ip-api.com ## 后记 @@ -350,4 +241,5 @@ systemctl start wg-quick@wg0 ## 感谢 -@Xray-core @V2ray-core @WireGuard @p3terx @w @Hiram @Luminous @Ln @JackChou +[XTLS/Xray-core](https://github.com/XTLS/Xray-core); [v2fly/v2ray-core](https://github.com/v2fly/v2ray-core); [WireGuard](https://www.wireguard.com/); [@p3terx](https://p3terx.com/); @w; @Hiram; @Luminous; @Ln; @JackChou; + \ No newline at end of file