dependabot[bot]
86b4b81f1d
Bump github.com/quic-go/quic-go from 0.34.0 to 0.35.1
...
Bumps [github.com/quic-go/quic-go](https://github.com/quic-go/quic-go ) from 0.34.0 to 0.35.1.
- [Release notes](https://github.com/quic-go/quic-go/releases )
- [Changelog](https://github.com/quic-go/quic-go/blob/master/Changelog.md )
- [Commits](https://github.com/quic-go/quic-go/compare/v0.34.0...v0.35.1 )
---
updated-dependencies:
- dependency-name: github.com/quic-go/quic-go
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
2023-06-01 18:23:56 -04:00
sambali9
5f5ae37571
Added tcp fragmentation for freedom outbound ( #2021 )
...
* Added tcp fragmentation for freedom outbound
* Added TCP_NODELAY to outbound sockopt
* Changed fragment parameters to accept ranges and changed strategy to use length
* Changed packetNumber to packets, supporting range.
* Refactored the freedom fragment logic
* Refine Write()
---------
Co-authored-by: RPRX <63339210+RPRX@users.noreply.github.com>
2023-05-22 02:59:58 +00:00
yuhan6665
c80646a045
Clean code dependencies on github.com/miekg/dns ( #2099 )
2023-05-21 03:40:56 +00:00
rurirei
d9af02812f
Add ctx to UDP dispatcherConn ( #2024 )
2023-05-06 03:18:08 +00:00
xqzr
dd81ad5342
Add `tcpMaxSeg` to `sockopt` ( #2002 )
2023-04-30 00:03:30 +00:00
世界
18e5b0963f
Update dependencies
2023-04-23 19:32:07 +08:00
yichya QC
90d915ea05
feat: add tcp_user_timeout
...
```json
{"streamSettings":{"sockopt": {"tcpUserTimeout": 10000}}}
```
run `gofmt -w -s .` as well
2023-04-22 20:41:43 -04:00
yuhan6665
197bc78ea1
Turn off Quic qlog since it jam the regular test info
2023-04-17 11:56:55 -04:00
RPRX
2c0a89f7dc
REALITY protocol: Set the fourth byte as reserved
2023-03-31 22:39:57 +00:00
RPRX
beb603af06
Allow IP address ServerName when "serverName" is not configured
...
In this case, TLS Client Hello will not have SNI (RFC 6066, Section 3)
2023-03-26 10:57:20 +00:00
Hirbod Behnam
526c6789ed
Add custom path to gRPC ( #1815 )
2023-03-26 09:28:19 +03:30
Hirbod Behnam
6872be5cc3
Add user agent to gRPC ( #1790 )
2023-03-26 09:23:42 +03:30
RPRX
0573760346
Do not show ciphertext SessionID or full AuthKey
2023-03-20 23:39:56 +08:00
世界
55efac7236
Reformat code
2023-03-17 13:17:08 +08:00
xqzr
c3322294be
Add `tcpWindowClamp` to `sockopt` ( #1757 )
...
Co-authored-by: RPRX <63339210+RPRX@users.noreply.github.com>
2023-03-09 13:51:16 +00:00
RPRX
836e84b851
Add recover() to H2 server's flushWriter.Write()
...
Fixes https://github.com/XTLS/Xray-core/issues/1748
2023-03-08 14:06:20 +00:00
yuhan6665
9e5bc07bf2
Legends never die ( #1725 )
2023-03-04 10:39:26 +00:00
RPRX
6526e74d49
Add WaitReadCloser to make H2 real 0-RTT
2023-03-02 14:50:26 +00:00
RPRX
55dc26f228
Add REALITY support to gRPC client and server
...
Now you are able to configure REALITY gRPC client and server
Duplicate of REALITY H2, perhaps, just for fun
2023-02-27 19:52:01 +00:00
RPRX
9401d65ef1
Add REALITY support to H2 server
...
Now you are able to configure REALITY H2 server directly
Before: REALITY VLESS fallbacks -> H2C inbound
2023-02-27 16:20:19 +00:00
RPRX
c38179a67f
Upgrade github.com/xtls/reality to f34b4d174342
...
Fixes https://github.com/XTLS/Xray-core/issues/1712
2023-02-26 19:26:57 +08:00
sduoduo233
336b2daeb9
DNS Header for KCP ( #1672 )
...
* dns header
* fixed domain name encoding for dns header
---------
Co-authored-by: kerry <lvhaiyangkerry@gmail.com>
2023-02-24 12:06:24 -05:00
xqzr
c8b4580869
add `V6Only` ( #1677 )
...
* add `V6Only`
* add `V6Only`
2023-02-24 11:54:40 -05:00
Yue Yin
03b8c094de
Support SPKI Fingerprint Pinning
...
Support SPKI Fingerprint Pinning for TLSObject
2023-02-24 11:47:00 -05:00
RPRX
4d5c3195d2
Refine random
...
Fixes https://github.com/XTLS/Xray-core/issues/1666
2023-02-18 05:55:19 +00:00
RPRX
4d2e2b24d3
THE NEXT FUTURE becomes THE REALITY NOW
...
Thank @yuhan6665 for testing
2023-02-15 16:07:12 +00:00
RPRX
9046eda5ce
Add callClose to UDP Dispatcher
...
Fixes https://github.com/XTLS/Xray-core/issues/1611
2023-02-08 14:59:14 +08:00
RPRX
f32921df30
Refine randomized
...
But we should avoid using it unless we have to, see
https://github.com/refraction-networking/utls/pull/157#issuecomment-1417156797
2023-02-08 14:51:15 +08:00
RPRX
f176ec54ee
v1.7.3
2023-02-02 05:50:21 +00:00
pocketW
bf35e9dcd6
fix: handle error raised by dispatcher
2023-02-01 10:17:42 -05:00
RPRX
dc72cf2c78
Refine fingerprints
...
Fixes https://github.com/XTLS/Xray-core/issues/1577
2023-02-01 12:58:17 +00:00
RPRX
b70912799b
Generate *.pb.go files with protoc v3.21.12
...
https://github.com/protocolbuffers/protobuf/releases/tag/v21.12
go install google.golang.org/protobuf/cmd/protoc-gen-go@v1.28
go install google.golang.org/grpc/cmd/protoc-gen-go-grpc@v1.2
go run ./infra/vprotogen
2023-01-30 04:35:30 +00:00
mra9776
f571aa72df
uTLS PinnedPeerCertificateChainSha256 ( #1556 )
...
* Add tests for utls PinnedPeerCertificateChain
* Fix utls not checking PinnedPeerCertificate
Co-authored-by: ahmadi <ahmadi@meshkan.com>
2023-01-27 04:19:49 +00:00
yuhan6665
3fb67f065a
Add fingerprint xray_random ( #1540 )
...
* Add fingerprint xray_random
xray_random means to pick a random uTLS fingerprint at the core startup
This way, the fingerprint is stable for a user for some days. While there is no identifiable signature for the whole xray community
* Fingerprint "random" refine
Exclude old fingerprint from RNG
2023-01-20 23:36:08 -05:00
aeeq
620eb63c1b
Add sockopt interface setting for binding outbound to a particular device like "eth0" ( #1494 )
...
* Update sockopt_linux.go
add Interface Name
* Update config.pb.go
add Interface Name
* Update transport_internet.go
add Interface Name
* Update config.pb.go
* update config.proto add interface
* Update config.pb.go
2023-01-09 09:45:30 -05:00
yuhan6665
32ce7cd730
Add new uTLS fingerprints
...
- correct safari
- new format is the variable name in https://github.com/refraction-networking/utls/blob/master/u_common.go#L163
- notable ones "HelloChrome_106_Shuffle", "Hello360_Auto", "HelloQQ_Auto"
2023-01-09 09:19:53 -05:00
yuhan6665
c4fbdf1b78
Run core/format.go
2022-12-25 19:47:53 -05:00
aabbccgg
0565589b8b
Changed quic MaxIdleTimeout from 30s to 5min & HandshakeIdleTimeout to 8s
2022-11-23 10:52:50 -05:00
Cubarco
8e75e9d763
Fix sockopt.TcpKeepAliveInterval
...
The Keep-Alive configs may be overridden with golang default settings when `tcpKeepAliveInterval` is set without `tcpKeepAliveIdle`.
2022-11-12 09:15:21 -05:00
Hirbod Behnam
da0b13cca0
Added uTLS to gRPC ( #1264 )
...
* Added uTLS to gRPC
* Use base 16 of ciphers as StandardName
2022-10-21 21:06:36 -04:00
Hirbod Behnam
1f93cbbc5d
Added utls to websocket ( #1256 )
...
* Added utls to websocket
* Slightly better code
One less allocation
2022-10-18 10:34:41 -04:00
Hirbod Behnam
93c7ebe382
Added utls to http2 transport
2022-10-13 10:44:49 -04:00
yuhan6665
8117b66949
Generate all protos
2022-10-10 13:17:32 -04:00
xqzr
8cf23f1947
add `tcpcongestion` ( #1234 )
...
* add `tcpcongestion`
* Update sockopt_linux.go
* Update config.pb.go
* Update transport_internet.go
* Update config.pb.go
* Update transport_internet.go
* Update config.proto
2022-10-10 13:13:50 -04:00
Mocking
4140bcd11a
Enhancement of "redirect" function, adding support for MacOS
...
Added the function of "MacOS" FreeBSD firewall traffic forwarding and resolving destination address
example:
"inbounds": [
{
"listen": "127.0.0.1",
"port": 1122,
"protocol": "dokodemo-door",
"tag": "dokodemo",
"settings": {
"network": "tcp",
"followRedirect": true,
"userLevel": 0
},
"streamSettings": {
"sockopt": {
"tproxy": "Redirect"
}
}
}
]
还原#1189 提交
2022-08-22 10:33:58 -04:00
S-Mocking
59602db02d
Add "tproxy" option ( #1189 )
...
* Add "tproxy" option
Added the function of "MacOS" FreeBSD firewall traffic forwarding and resolving destination address
example:
"inbounds": [
{
"listen": "127.0.0.1",
"port": 1122,
"protocol": "dokodemo-door",
"tag": "dokodemo",
"settings": {
"network": "tcp",
"followRedirect": true,
"userLevel": 0
},
"streamSettings": {
"sockopt": {
"tproxy": "pf"
}
}
}
]
* Add "tproxy" option
Added the function of "MacOS" FreeBSD firewall traffic forwarding and resolving destination address
example:
"inbounds": [
{
"listen": "127.0.0.1",
"port": 1122,
"protocol": "dokodemo-door",
"tag": "dokodemo",
"settings": {
"network": "tcp",
"followRedirect": true,
"userLevel": 0
},
"streamSettings": {
"sockopt": {
"tproxy": "pf"
}
}
}
]
* Add "tproxy" option
Added the function of "MacOS" FreeBSD firewall traffic forwarding and resolving destination address
example:
"inbounds": [
{
"listen": "127.0.0.1",
"port": 1122,
"protocol": "dokodemo-door",
"tag": "dokodemo",
"settings": {
"network": "tcp",
"followRedirect": true,
"userLevel": 0
},
"streamSettings": {
"sockopt": {
"tproxy": "pf"
}
}
}
]
Co-authored-by: Mocking <fanhaiwang0817@gmail.com>
2022-08-20 09:02:18 -04:00
ksco.he
76638d793c
fix(udp): check addr nil (close 1807)
2022-08-12 20:33:33 -04:00
yuhan6665
340234166b
Add TCPKeepAliveIdle in Sockopt option ( #1166 )
...
* Add TCP keep alive idle setting
* Add TCP keep alive idle setting: auto generated
* Add TCP keep alive support in Linux
* Add TCP keep alive support in MacOS, FreeBSD
* Add TCP keep alive support in Windows
* fix bug introduced in adding tcp keep alive adjustment
* embed macOS const to avoid platform inconsistency
* embed macOS const to avoid platform inconsistency(again)
* add TCP Keep Alive support in config
* use sys/unix instead of syscall
Suggestion from:
https://github.com/v2fly/v2ray-core/pull/1395#issuecomment-974761647
* use sys/unix instead of syscall
Suggestion from:
https://github.com/v2fly/v2ray-core/pull/1395#issuecomment-974761647
* Separate TcpKeepAliveIdle and TcpKeepAliveInterval check logic
* Disable tcp keepAlive when TcpKeepAliveIdle < 0 and TcpKeepAliveInterval <= 0
Co-authored-by: xqzr <34030394+xqzr@users.noreply.github.com>
Co-authored-by: ValdikSS <iam@valdikss.org.ru>
Co-authored-by: Shelikhoo <xiaokangwang@outlook.com>
Co-authored-by: xqzr <34030394+xqzr@users.noreply.github.com>
2022-07-31 09:55:40 -04:00
yuhan6665
00230a74d5
Fix new Quic lib: KeepAlivePeriod ( #1139 )
...
* Bump github.com/lucas-clemente/quic-go from 0.27.2 to 0.28.0
Bumps [github.com/lucas-clemente/quic-go](https://github.com/lucas-clemente/quic-go ) from 0.27.2 to 0.28.0.
- [Release notes](https://github.com/lucas-clemente/quic-go/releases )
- [Changelog](https://github.com/lucas-clemente/quic-go/blob/master/Changelog.md )
- [Commits](https://github.com/lucas-clemente/quic-go/compare/v0.27.2...v0.28.0 )
---
updated-dependencies:
- dependency-name: github.com/lucas-clemente/quic-go
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
* Fix new Quic lib: KeepAlivePeriod
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-07-10 21:38:39 -04:00
世界
6f93ef7736
Remove useless error log
2022-06-01 11:11:53 +08:00
世界
f046feb9ca
Reformat code
2022-05-18 15:29:01 +08:00
yuhan6665
c9df755426
Add quic qlog to debug logs
2022-04-23 19:23:15 -04:00
yuhan6665
393d211d1e
Rename quic session to connection
...
Co-authored-by: 秋のかえで <autmaple@protonmail.com>
2022-04-09 00:48:02 -04:00
hmol233
b3ab94ef5b
Refine domain socket permission
2022-02-18 22:01:29 -05:00
yuhan6665
41ce6ccf9f
Make reverse proxy compatible with v2fly ( #924 )
...
* Make reverse proxy compatible with v2fly
* Fix gitignore
* Regenerate proto files
- fix v2ray name in loopback
* Fix fly.org in unit tests
2022-02-04 21:59:50 -05:00
yuhan6665
578d903a9e
Quic related improvements ( #915 )
...
* DialSystem for Quic
DialSystem() is needed in case of Android client,
where the raw conn is protected for vpn service
* Fix client dialer log
Log such as:
tunneling request to tcp:www.google.com:80 via tcp:x.x.x.x:443
the second "tcp" is misleading when using mKcp or quic transport
Remove the second "tcp" and add the correct logging for transport dialer:
- transport/internet/tcp: dialing TCP to tcp:x.x.x.x:443
- transport/internet/quic: dialing quic to udp:x.x.x.x:443
* Quic new stream allocation mode
Currently this is how Quic works: client muxing all tcp and udp traffic through a single session, when there are more than 32 running streams in the session,
the next stream request will fail and open with a new session (port). Imagine lineup the session from left to right:
|
| |
| | |
As the streams finishes, we still open stream from the left, original session. So the base session will always be there and new sessions on the right come and go.
However, either due to QOS or bugs in Quic implementation, the traffic "wear out" the base session. It will become slower and in the end not receiving any data from server side.
I couldn't figure out a solution for this problem at the moment, as a workaround:
| |
| | |
| | |
I came up with this new stream allocation mode, that it will never open new streams in the old sessions, but only from current or new session from right.
The keeplive config is turned off from server and client side. This way old sessions will natually close and new sessions keep generating.
Note the frequency of new session is still controlled by the server side. Server can assign a large max stream limit. In this case the new allocation mode will be similar to the current mode.
2022-01-28 18:11:30 -05:00
hmol233
63da3a5481
grpc: add initial_windows_size option
2021-12-19 21:14:14 -05:00
yuhan6665
e93da4bd02
Fix some tests and format code ( #830 )
...
* Increase some tls test timeout
* Fix TestUserValidator
* Change all tests to VMessAEAD
Old VMess MD5 tests will be rejected and fail in 2022
* Chore: auto format code
2021-12-14 19:28:47 -05:00
yaotthaha-vscode
4fc284a8e9
Try to fix UDP error
2021-12-01 12:02:27 -05:00
roc
dd6769954c
hotRelodaInterval --> hotReloadInterval
2021-10-26 21:45:31 -04:00
世界
5c366db847
Add observatory / latestPing balancing strategy
...
Co-authored-by: Shelikhoo <xiaokangwang@outlook.com>
2021-10-22 17:16:20 +08:00
Xiaokang Wang
13bc0432bc
WebSocket Early Data Protocol Harmonization with V2Ray/V2Fly ( #548 )
...
* protocol harmonization with V2Ray/V2Fly by supporting both V2Ray server and XRay server
* protocol harmonization with V2Ray/V2Fly by supporting both V2Ray server and XRay server comment
2021-10-22 12:38:40 +08:00
yuhan6665
acb81ebe3d
Verify peer cert function for better man in the middle prevention ( #746 )
...
* verify peer cert function for better man in the middle prevention
* publish cert chain hash generation algorithm
* added calculation of certificate hash as separate command and tlsping, use base64 to represent fingerprint to align with jsonPb
* apply coding style
* added test case for pinned certificates
* refactored cert pin
* pinned cert test
* added json loading of the PinnedPeerCertificateChainSha256
* removed tool to prepare for v5
* Add server cert pinning for Xtls
Change command "xray tls certChainHash" to xray style
Co-authored-by: Shelikhoo <xiaokangwang@outlook.com>
2021-10-22 12:38:40 +08:00
yuhan6665
c4fc277758
add comment for gRPC TLS silent failure behavior ( #779 )
...
When gRPC transport have been configured to use TLS, it may silently ignore TLS failure. This may make it harder to diagnose TLS setting issues when gRPC transport is used. This comment is added to help other developers be aware of this caveat.
Co-authored-by: Shelikhoo <xiaokangwang@outlook.com>
2021-10-22 12:38:40 +08:00
世界
50e576081e
Add DispatchLink
2021-10-22 12:38:40 +08:00
世界
625cf7361a
Export PacketConnWrapper
2021-10-22 11:57:38 +08:00
yuhan6665
e286cdcaa8
Style: format code by gofumpt ( #761 )
2021-10-20 00:57:14 +08:00
yuhan6665
a229a7f85e
Revert "cancel failed grpc connection ( #707 )" ( #768 )
...
This reverts commit 0f79126379
.
2021-10-16 21:07:45 +08:00
lucifer
5e606169f1
gRPC: Parse X-Real-IP header, fix #766 ( #769 )
2021-10-14 12:10:19 +08:00
Arthur Morgan
575c7a9687
adjust
2021-10-13 00:49:31 +08:00
yuhan6665
e6711d1b48
Add header and method support to http2 transport ( #755 )
...
Co-authored-by: Shelikhoo <xiaokangwang@outlook.com>
2021-10-12 15:58:12 +00:00
yuhan6665
4bb61701b5
Add tcpKeepAliveInterval in transport sockopt ( #754 )
...
Co-authored-by: Ahmad Karimi <ak12hastam@gmail.com>
Co-authored-by: Shelikhoo <xiaokangwang@outlook.com>
2021-10-12 15:39:08 +00:00
yuhan6665
ef4c63812b
Fix: nullcheck on alternative systemDialer ( #752 )
...
* fix: null-check on alternative systemDialer
* delete deprecated option DualStack
Co-authored-by: rurirei <72071920+rurirei@users.noreply.github.com>
2021-10-12 15:32:45 +00:00
yuhan6665
3554886ce1
vformat supports multi-core processing ( #757 )
...
* Feat: vformat supports multi-core processing (#996 )
Co-authored-by: Loyalsoldier <10487845+Loyalsoldier@users.noreply.github.com>
2021-10-12 15:29:22 +00:00
hmol233
7033f7cf5f
Fix: protobuf file ( #724 )
2021-09-20 22:41:09 +08:00
Arthur Morgan
ffc2f7c4e2
Style: format code
2021-09-20 21:00:55 +08:00
Arthur Morgan
24b637cd5e
Fix: CounterConnection with ReadV/WriteV ( #720 )
...
Co-authored-by: JimhHan <50871214+JimhHan@users.noreply.github.com>
2021-09-20 20:11:21 +08:00
WeidiDeng
b0b2aaa70c
Fixed refresh error when multiple certificates exist ( #663 )
...
* Fix when there are multiple certs, after refresh from file all will be the same as the last.
2021-09-18 03:48:22 +08:00
yuhan6665
42d158bd85
vprotogen refine ( #717 )
...
* Update all proto files with existing vprotogen
* Chore: remove protoc-gen-gofast
* Feat: vprotogen adds version detector to block generation code from old protobuf version
* Feat: vprotogen refine logic
Co-authored-by: Loyalsoldier <10487845+Loyalsoldier@users.noreply.github.com>
2021-09-18 01:16:14 +08:00
yuhan6665
0f79126379
cancel failed grpc connection ( #707 )
...
Co-authored-by: Shelikhoo <xiaokangwang@outlook.com>
2021-09-15 01:40:38 +08:00
Arthur Morgan
e6019a89c9
adjust for go1.17
2021-09-08 01:30:20 +08:00
Arthur Morgan
c950edede2
Merge pull request #618 from XTLS/fix/service-name
...
gRPC: Use `PathEscape` encoded service name
2021-09-08 00:53:55 +08:00
Arthur Morgan
64892fb2c3
Merge pull request #609 from XTLS/fix/dialer
...
Move `DomainStrategy` & `DialerProxy` to `DialSystem`
2021-09-08 00:53:37 +08:00
Arthur Morgan
d9d239750b
Merge pull request #633 from XTLS/feature/h2-health-check
...
Add health check for h2 & gRPC
2021-09-08 00:52:10 +08:00
Arthur Morgan
7a9e72b133
Merge pull request #589 from bhoppi/main
...
Fix: new cert issuing is incorrectly delayed
2021-09-08 00:50:32 +08:00
hmol233
31c7141fef
gRPC: add keepalive option `PermitWithoutStream`
2021-07-05 21:25:21 +08:00
hmol233
57b9006d26
gRPC: add keepalive option for server
2021-07-05 21:25:03 +08:00
hmol233
d9d04a230f
Add h2 & gRPC health check
2021-07-03 16:01:59 +08:00
hmol233
3dc9fba20d
gRPC: Use `PathEscape` encoded service name
2021-06-27 16:46:26 +08:00
hmol233
86a8fb5d84
Move `DomainStrategy` & `DialerProxy` to `DialSystem`
...
Fix https://github.com/XTLS/Xray-core/issues/608
2021-06-18 19:28:02 +08:00
Bhoppi Chaw
2220411644
fix new cert issuing is incorrectly delayed
2021-06-05 23:32:05 +08:00
hmol233
3b8618b379
Fix linkname
2021-05-10 07:11:27 +08:00
hmol233
e8a8465220
Fix reject unknown sni with single cert
2021-05-10 00:28:40 +08:00
hmol233
1f92b948c0
Fix errNoCertificates
2021-05-10 00:11:45 +08:00
hmol233
53b99efe78
Add: reject unknown SNI
...
Co-Authored-By: 玖柒Max <60207794+jiuqi9997@users.noreply.github.com>
2021-05-09 23:47:21 +08:00
Bhoppi Chaw
bf94fb53ca
Fix QUIC disconnecting issue ( #475 )
...
Co-authored-by: RPRX <63339210+rprx@users.noreply.github.com>
2021-04-06 16:37:28 +00:00
lucifer
1d13a8da49
fix grpc dial ipv6 address ( #476 )
2021-04-05 09:00:46 +08:00
RPRX
4bf8b6d89c
Fix uTLS fingerprints support
...
Thank @HirbodBehnam https://github.com/XTLS/Xray-core/issues/461
2021-04-01 09:15:18 +00:00
秋のかえで
7f2fad73d4
Chore: Upgrade dependencies ( #432 )
...
Co-authored-by: RPRX <63339210+rprx@users.noreply.github.com>
2021-03-31 06:18:34 +00:00
Jim Han
3ed14c2fcd
Fix: gRPC & HTTP/2 dialer ( #445 )
2021-03-30 16:43:31 +00:00
risetechlab
b63049f404
Fix: TFO AsIs bug ( #452 )
2021-03-30 16:42:02 +00:00
RPRX
a9e11075d1
Add uTLS fingerprints support ( #451 )
2021-03-29 10:08:29 +00:00
Jim Han
e564d9ef7e
Fix: TCP & WS override AcceptProxyProtocol ( #425 )
2021-03-28 16:16:07 +00:00
RPRX
e0910ab4d9
Update dialer.html
2021-03-23 16:55:05 +00:00
RPRX
d46af8b5d4
Add WSS Browser Dialer support ( #421 )
2021-03-23 09:25:35 +00:00
Jim Han
0470381fe2
Fix: gRPC multi accepting empty bytes ( #411 )
2021-03-21 09:16:52 +00:00
maskedeken
36961ed882
Add remote addr to gRPC transport layer conn ( #382 )
...
Co-authored-by: RPRX <63339210+rprx@users.noreply.github.com>
2021-03-17 17:55:51 +00:00
RPRX
a0a32ee00d
Add gRPC Transport support ( #356 )
...
Co-authored-by: JimhHan <50871214+JimhHan@users.noreply.github.com>
2021-03-14 15:02:07 +00:00
RPRX
60b06877bf
Add WebSocket 0-RTT support ( #375 )
2021-03-14 07:10:10 +00:00
RPRX
819717d278
Fix https://github.com/XTLS/Xray-core/issues/366
2021-03-12 11:38:36 +00:00
Jim Han
d7cd71b741
Resolve conflicting changes in DNS #309 #341 ( #346 )
...
Co-authored-by: yuhan6665 <1588741+yuhan6665@users.noreply.github.com>
2021-03-07 07:12:50 +00:00
Jim Han
db32ce6fd9
Enhance DNS and Dialer ( #341 )
2021-03-06 16:29:17 +00:00
risetechlab
ad1807dd99
Enhance TCP Fast Open ( #310 )
2021-03-06 14:45:12 +00:00
Jim Han
7fb1f65354
Fix https://github.com/XTLS/Xray-core/issues/289 ( #300 )
2021-03-01 02:43:27 +00:00
RPRX
8b9c0ae593
Enable (X)TLS hot reloading by default ( #281 )
...
Super BiuBiu
2021-02-20 02:15:57 +00:00
秋のかえで
347d9735da
Remove (x)tls.WithNextProto("h2") in tcp/hub.go ( #260 )
2021-02-18 11:50:09 +00:00
eMeab
81d993158f
Support hot reloading of certificate and key files ( #225 )
2021-02-12 15:33:19 +00:00
eMeab
c13b8ec9bb
Fix OCSP Stapling ( #172 )
...
Co-authored-by: RPRX <63339210+rprx@users.noreply.github.com>
2021-01-30 23:17:07 +00:00
Arthur Morgan
ba41513967
Changes from v2fly-core ( #173 )
2021-01-22 03:35:56 +00:00
RPRX
7df135a5c4
Disable session resumption by default
...
https://github.com/v2fly/v2ray-core/issues/557#issuecomment-751962569
2021-01-01 11:33:09 +00:00
RPRX
13ad3fddf6
Refactor: *net.UDPAddr -> *net.Destination
...
https://t.me/projectXray/111998
2020-12-28 09:40:28 +00:00
RPRX
6bcac6cb10
Move common/net/connection.go into cnc folder
2020-12-28 03:20:39 +08:00
RPRX
a78db47571
Adjust OCSP Stapling
2020-12-25 15:10:12 +00:00
eMeab
3d7e86efba
Add OCSP Stapling for TLS & XTLS ( #92 )
2020-12-25 08:01:20 +00:00
Arthur Morgan
6f25191822
Changes from v2ray-core ( #93 )
2020-12-24 19:45:35 +00:00
RPRX
8f8f7dd66f
Refactor: Shadowsocks & Trojan UDP FullCone NAT
...
https://t.me/projectXray/95704
2020-12-23 13:06:21 +00:00
RPRX
ff9bb2d8df
Optimize cipherSuites setting loader
2020-12-17 09:25:30 +00:00
RPRX
38faac5ffc
Adjust config loader of TLS & XTLS
2020-12-16 15:59:04 +00:00
eMeab
88dfed931b
Add cipherSuites setting for TLS & XTLS ( #78 )
2020-12-16 12:53:55 +00:00
Jim Han
fe445f8e1a
Fix: HTTP dialer uses ctx instead of context.Background() ( #79 )
2020-12-16 11:52:45 +00:00
RPRX
ed0e9b12dc
Adjust ProtoBuf of TLS & XTLS
2020-12-16 08:50:18 +00:00
eMeab
dab978749c
Add minVersion setting for TLS & XTLS ( #77 )
2020-12-16 05:20:24 +00:00
RPRX
f8faf3c8b8
Removal: confonly
2020-12-11 13:05:29 +08:00
RPRX
f1eb5e3d08
Refactor: Support TCP/IPv6 in REDIRECT mode
...
十分感谢 @badO1a5A90 @LGA1150 协助测试
https://github.com/XTLS/Xray-core/issues/48#issuecomment-741509789
https://github.com/v2ray/v2ray-core/issues/1309#issuecomment-447432696
2020-12-09 12:16:38 +00:00
RPRX
16544c18ab
v1.1.0
2020-12-04 09:36:16 +08:00
RPRX
c7f7c08ead
v1.0.0
2020-11-25 19:01:53 +08:00