diff --git a/README.md b/README.md index 807df1c..9ff6a0f 100644 --- a/README.md +++ b/README.md @@ -1,122 +1,27 @@ -# ServerStatus中文版： +# ServerStatus1Click -* ServerStatus中文版是一个酷炫高逼格的云探针、云监控、服务器云监控、多服务器探针~。 -* 在线演示：https://tz.cloudcpp.com +## 说明 +客户端源码fork自@cppla，一键脚本自制 +
ServerStatus客户端的一键安装脚本，只需输入必要数据即可全自动安装并启动，脚本只需运行一次。 +
脚本在centos7上测试通过，其他发行版未测试。 +
理论上其他版本linux也可使用，请测试通过后提issue，谢谢。 +
欢迎star、fork，本脚本不定时更新，不定时从@cppla处合并新版本ServerStatus源码。 +
不支持window各版本 -# 目录介绍： +## 使用教程 +```` +wget -N --no-check-certificate https://raw.githubusercontent.com/dovela/ServerStatus/master/ServerStatus1Click.sh +chmod +x ServerStatus1Click.sh +./ServerStatus1Click.sh +```` -* autodeploy 自动部署脚本 -* clients 客户端文件 -* server 服务端文件 -* web 网站文件 +## 其他 +默认远程端口35601，安装依赖选项为安装git、lsof、psutil，建议执行一次 -# 更新说明： - -* 20180626, 增加客户端自动部署脚本，代码:https://github.com/dovela/ServerStatus1Click -* 20180314, 调整前端，置默认密码为，设置ip和user即可上线　　　　　　 -* 20180312, 加入失联(被照顾)检测【正常：MH361, 屏蔽：MH370】，校准虚拟化(container)流量统计异常　　　　　　 -* 20170807, 更新平均1，5，15负载 -* 20170607, 去掉无用的IPV6信息，增加服务器总流量监控         - -# 自动部署： - -【服务端】：暂无 - -【客户端】： -```bash -wget -N --no-check-certificate https://raw.githubusercontent.com/cppla/ServerStatus/master/autodeploy/client-auto.sh -chmod +x client-auto.sh -./client-auto.sh -``` - -# 手动安装教程： - -【克隆代码】: -``` -git clone https://github.com/cppla/ServerStatus.git -``` - -【服务端配置】（服务端程序在ServerStatus/web下）: - -一、生成服务端程序 -``` -cd ServerStatus/server -make -./sergate -``` -如果没错误提示，OK，ctrl+c关闭；如果有错误提示，检查35601端口是否被占用 - -二、修改配置文件 -修改config.json文件，注意username, password的值需要和客户端对应一致     -``` -{"servers": - [ - { - "username": "s01", - "name": "Mainserver 1", - "type": "Dedicated Server", - "host": "GenericServerHost123", - "location": "Austria", - "password": "some-hard-to-guess-copy-paste-password" - }, - ] -} -``` - -三、拷贝ServerStatus/status到你的网站目录 -例如： -``` -sudo cp -r ServerStatus/web/* /home/wwwroot/default -``` - -四、运行服务端： -web-dir参数为上一步设置的网站根目录，务必修改成自己网站的路径 -``` -./sergate --config=config.json --web-dir=/home/wwwroot/default -``` - -【客户端配置】（客户端程序在ServerStatus/clients下）： -客户端有两个版本，client-linux为普通linux，client-psutil为跨平台版，普通版不成功，换成跨平台版即可。 - -一、client-linux版配置： -1、vim client-linux.py, 修改SERVER地址，username帐号， password密码 -2、python client-linux.py 运行即可。 - -二、client-psutil版配置: -1、安装psutil跨平台依赖库 -2、vim client-psutil.py, 修改SERVER地址，username帐号， password密码 -3、python client-psutil.py 运行即可。 -``` -### for Centos： -sudo yum -y install epel-release -sudo yum -y install python-pip -sudo yum clean all -sudo yum -y install gcc -sudo yum -y install python-devel -sudo pip install psutil -### for Ubuntu/Debian: -sudo root -apt-get -y install python-setuptools python-dev build-essential -apt-get -y install python-pip -pip install psutil -### for Windows: -打开网址：https://pypi.python.org/pypi?:action=display&name=psutil#downloads -下载psutil for windows程序包 -安装即可 -``` - -打开云探针页面，就可以正常的监控。接下来把服务器和客户端脚本自行加入开机启动，或者进程守护，或以后台方式运行即可！例如： nohup python client-linux.py & - -# 为什么会有ServerStatus中文版： - -* 有些功能确实没用 -* 原版本部署，英文说明复杂 -* 不符合中文版的习惯 -* 没有一次又一次的轮子，哪来如此优秀的云探针 - -# 相关开源项目，感谢： - -* ServerStatus：https://github.com/BotoX/ServerStatus +## 特别感谢 +* cppla's ServerStatus: https://github.com/cppla/ServerStatus +* ServerStatus: https://github.com/BotoX/ServerStatus * mojeda: https://github.com/mojeda * mojeda's ServerStatus: https://github.com/mojeda/ServerStatus * BlueVM's project: http://www.lowendtalk.com/discussion/comment/169690#Comment_169690 +* 参考了ToyoDAdoubi的一键脚本: https://github.com/ToyoDAdoubi/doubi diff --git a/ServerStatus1Click.sh b/ServerStatus1Click.sh new file mode 100644 index 0000000..3a73ea0 --- /dev/null +++ b/ServerStatus1Click.sh @@ -0,0 +1,145 @@ +#!/bin/bash + +#================================================= +# System Required: CentOS 6+/Debian 6+/Ubuntu 14.04+/others(test) +# Description: Auto-install the ServerStatus Client +# Version: 1.0.2 +# Author: dovela +#================================================= + +check_sys(){ + if [[ -f /etc/redhat-release ]]; then + release="centos" + elif cat /etc/issue | grep -q -E -i "debian"; then + release="debian" + elif cat /etc/issue | grep -q -E -i "ubuntu"; then + release="ubuntu" + elif cat /etc/issue | grep -q -E -i "centos|red hat|redhat"; then + release="centos" + elif cat /proc/version | grep -q -E -i "debian"; then + release="debian" + elif cat /proc/version | grep -q -E -i "ubuntu"; then + release="ubuntu" + elif cat /proc/version | grep -q -E -i "centos|red hat|redhat"; then + release="centos" + fi + bit=`uname -m` +} + +centos_yum(){ + yum install -y epel-release && yum clean all && yum update + yum install -y git lsof python-pip gcc python-devel +} + +debian_apt(){ + apt-get install -y git lsof python-setuptools python-dev build-essential python-pip +} + +install_sss(){ + clear + stty erase '^H' && read -p " 服务端地址:" sserver + stty erase '^H' && read -p " 远程端口（默认35601）:" sport + [[ -z ${sport} ]] && sport="35601" + stty erase '^H' && read -p " 客户端username:" suser + stty erase '^H' && read -p " 客户端password:" spasswd + clear + git clone https://github.com/dovela/ServerStatus.git + rm -rf oneclick.sh + echo 'ServerStatus客户端安装完成' + cd ServerStatus/clients + sed -i -e "s/sserver/$sserver/g" client-linux.py + sed -i -e "s/sport/$sport/g" client-linux.py + sed -i -e "s/suser/$suser/g" client-linux.py + sed -i -e "s/spasswd/$spasswd/g" client-linux.py + sed -i -e "s/sserver/$sserver/g" client-psutil.py + sed -i -e "s/sport/$sport/g" client-psutil.py + sed -i -e "s/suser/$suser/g" client-psutil.py + sed -i -e "s/spasswd/$spasswd/g" client-psutil.py + clear + echo ' ServerStatus客户端配置完成，请进行下一步' + echo ' 1. 运行 client-linux' + echo ' 2. 运行 client-psutil' + stty erase '^H' && read -p " 请输入数字 [1-2]:" num + case "$num" in + 1) + run_linux + ;; + 2) + run_psutil + ;; +esac +} + +delete_sss(){ + kill -9 $(lsof -i:35601 |awk '{print $2}' | tail -n 1) + rm -rf ServerStatus +} + +run_linux(){ + nohup python client-linux.py >> serverstatus.log 2>&1 & + cd ../.. + echo 'ServerStatus-linux客户端已开始运行' +} + +run_psutil(){ + nohup python client-psutil.py >> serverstatus.log 2>&1 & + cd ../.. + echo 'ServerStatus-psutil客户端已开始运行' +} + +stop_client(){ + kill -9 $(lsof -i:35601 |awk '{print $2}' | tail -n 1) +} + +install_env(){ + clear + if [[ ${release} == "centos" ]]; then + centos_yum + else + debian_apt + fi + pip install --upgrade + pip install psutil + echo '依赖环境安装完成，请再次运行脚本' +} + + clear +check_sys +[ $(id -u) != "0" ] && echo -e "Error: You must be root to run this script" && exit 1 +echo -e " 默认端口35601，出现问题请在 https://github.com/dovela/ServerStatus1Click 处提issue +———————————— + 1.首次安装并启动 ServerStatus客户端 + 2.运行 client_linux + 3.运行 client_psutil + 4.停止运行 + 5.首次安装linux依赖，直接安装失败请执行 + 6.卸载ServerStatus +———————————— + 输入数字开始，或ctrl + c退出 +" +echo && stty erase '^H' && read -p " 请输入数字[1-6]:" num + case "$num" in + 1) + install_sss + ;; + 2) + cd ServerStatus/clients + run_linux + ;; + 3) + cd ServerStatus/clients + run_psutil + ;; + 4) + stop_client + ;; + 5) + install_env + ;; + 6) + delete_sss + ;; + *) + echo -e "${Error} 请输入正确的数字 [1-5]!" + ;; +esac diff --git a/autodeploy/client-auto.sh b/autodeploy/client-auto.sh deleted file mode 100644 index bc828dc..0000000 --- a/autodeploy/client-auto.sh +++ /dev/null @@ -1,99 +0,0 @@ -#!/bin/bash -# author: https://github.com/dovela/ServerStatus1Click -# 支持操作系统：centos,debian,ubuntu,redhat 其它未测试 -# 时间: 20180626 - -[ $(id -u) != "0" ] && { echo "Error: You must be root to run this script"; exit 1; } -install_sss(){ - clear - stty erase '^H' && read -p " 服务端地址:" sserver - stty erase '^H' && read -p " 客户端username:" suser - stty erase '^H' && read -p " 客户端password:" spasswd - clear - git clone https://github.com/dovela/ServerStatus.git - rm -rf oneclick.sh - echo 'ServerStatus客户端安装完成' - cd ServerStatus/clients - sed -i -e "s/sserver/$sserver/g" client-linux.py - sed -i -e "s/suser/$suser/g" client-linux.py - sed -i -e "s/spasswd/$spasswd/g" client-linux.py - sed -i -e "s/sserver/$sserver/g" client-psutil.py - sed -i -e "s/suser/$suser/g" client-psutil.py - sed -i -e "s/spasswd/$spasswd/g" client-psutil.py - clear - echo ' ServerStatus客户端配置完成，请进行下一步' - echo ' 1. 运行 client-linux' - echo ' 2. 运行 client-psutil' - stty erase '^H' && read -p " 请输入数字 [1-2]:" num - case "$num" in - 1) - run_linux - ;; - 2) - run_psutil - ;; -esac -} - -run_linux(){ - nohup python client-linux.py >> serverstatus.log 2>&1 & - cd ../.. - echo 'ServerStatus-linux客户端已开始运行' -} - -run_psutil(){ - nohup python client-psutil.py >> serverstatus.log 2>&1 & - cd ../.. - echo 'ServerStatus-psutil客户端已开始运行' -} - -install_env(){ - clear - yum install -y git lsof - apt-get install -y git lsof - yum -y install epel-release - yum clean all - yum -y install python-pip gcc python-devel - apt-get -y install python-setuptools python-dev build-essential python-pip - pip install --upgrade - pip install psutil - clear - echo '依赖环境安装完成，请再次运行脚本' -} - -clear -echo -e " 注意：此脚本基于centos7编写，默认端口35601，出现问题请在 @dovela 处提issue - -———————————— - 1.首次安装并启动 ServerStatus客户端 - 2.运行 client_linux - 3.运行 client_psutil - 4.停止运行 - 5.首次安装依赖，直接安装失败请执行 -———————————— - 输入数字开始，或ctrl + c退出 -" -echo && stty erase '^H' && read -p " 请输入数字[1-5]:" num - case "$num" in - 1) - install_sss - ;; - 2) - cd ServerStatus/clients - run_linux - ;; - 3) - cd ServerStatus/clients - run_psutil - ;; - 4) - kill -9 $(lsof -i:35601 |awk '{print $2}' | tail -n 1) - ;; - 5) - install_env - ;; - *) - echo -e "${Error} 请输入正确的数字 [1-5]!" - ;; -esac - diff --git a/clients/client-linux.py b/clients/client-linux.py index 7a810c0..5b83b45 100755 --- a/clients/client-linux.py +++ b/clients/client-linux.py @@ -5,10 +5,10 @@ # 时间: 20180312 -SERVER = "127.0.0.1" -PORT = 35601 -USER = "s01" -PASSWORD = "USER_DEFAULT_PASSWORD" +SERVER = "sserver" +PORT = sport +USER = "suser" +PASSWORD = "spasswd" INTERVAL = 1 #更新间隔 diff --git a/clients/client-psutil.py b/clients/client-psutil.py index 6c501b2..393aa17 100755 --- a/clients/client-psutil.py +++ b/clients/client-psutil.py @@ -5,10 +5,10 @@ # 支持操作系统： Linux, Windows, OSX, Sun Solaris, FreeBSD, OpenBSD and NetBSD, both 32-bit and 64-bit architectures # 时间： 20180312 -SERVER = "127.0.0.1" -PORT = 35601 -USER = "s01" -PASSWORD = "USER_DEFAULT_PASSWORD" +SERVER = "sserver" +PORT = sport +USER = "suser" +PASSWORD = "spasswd" INTERVAL = 1 # 更新间隔 diff --git a/run.sh b/run.sh new file mode 100644 index 0000000..5fbaeac --- /dev/null +++ b/run.sh @@ -0,0 +1,3 @@ +kill -9 $(lsof -i:35601 |awk '{print $2}' | tail -n 1) +nohup ./server/sergate --config=server/config.json --web-dir=$(dirname $0 | pwd)/web/ >> run.log 2>&1 & +cd ..